Re: Unable to set the card
Bogdan Costescu <[email protected]> Mon, 1 Dec 2003 17:31:23 +0100 (CET)
| Newsgroups | gmane.linux.drivers.vortex.devel |
|---|---|
| Message-ID | <Pine.LNX.4.44.0312011728080.23297-100000@kenzo.iwr.uni-heidelberg.de> |
On Mon, 1 Dec 2003, ZIGLIO Frediano wrote: > In my firm we have a network with CISCO equipment (Catalyst 6500), the > port is configured (fixed) at 100 full duplex. You are looking at the wrong side. Configure the switch port to Autonegotiate/NWAY and the card will work with the Linux driver. Alternatively, you can use the mii-diag tool to force the driver/card also to 100-FD, but this is not guaranteed to work. It's the millionth time we answer such question here. Please look in the list archives for reason and explanation of the problem. -- Bogdan Costescu IWR - Interdisziplinaeres Zentrum fuer Wissenschaftliches Rechnen Universitaet Heidelberg, INF 368, D-69120 Heidelberg, GERMANY Telephone: +49 6221 54 8869, Telefax: +49 6221 54 8868 E-mail: [email protected] _______________________________________________ vortex mailing list [email protected] http://www.scyld.com/mailman/listinfo/vortex