Re: vlan tagging support in 3c59x v0.99Y
Ruben van der Leij <[email protected]>
| Newsgroups | gmane.linux.drivers.vortex.devel,gmane.linux.drivers.vortex.user |
|---|---|
| Organization | Eh? Whats that? |
| Message-ID | <[email protected]> |
+++ Tristen Rasmussen [05/03/03 20:36 -0500]:
> My ethereal trace for the NIC shows no indication of a VLAN id.
How does your ifconfig-output look like?
It should list a couple of extra devices, where the vlan-id is added as a
eth(n).<vlanid>.
I don't have a linux-box running vlan's but on FreeBSD (well, a Juniper M40,
actually, but that doesn't make any difference) it looks like this:
ge-0/1/0.9: flags=0x8000 <UP|MULTICAST>
inet local=213.239.154.1 dest=213.239.154.0/26 bcast=213.239.154.63
ge-0/1/0.14: flags=0x8000 <UP|MULTICAST>
inet local=213.239.157.1 dest=213.239.157.0/24 bcast=213.239.157.255
inet6 local=2001:9a8:1205:21::1 dest=2001:9a8:1205:21::/64
local=2001:9a8:1205:22::1 dest=2001:9a8:1205:22::/64
local=2001:9a8:1205:25::1 dest=2001:9a8:1205:25::/64
Your vlan-devices should look like eth0.17 for vlan-id 17 on eth0.
http://www.candelatech.com/~greear/vlan.html#setup gives detailed
installation instructions. Did you follow them? (Just checking)
--
Ruben van der Leij
O'Reilly's Law of the Kitchen:
Cleanliness is next to impossible
_______________________________________________
vortex mailing list
[email protected]
http://www.scyld.com/mailman/listinfo/vortex