Re: vlan tagging support in 3c59x v0.99Y
Ben Greear <[email protected]>
| Newsgroups | gmane.linux.drivers.vortex.devel,gmane.linux.drivers.vortex.user |
|---|---|
| Organization | Candela Technologies |
| Message-ID | <[email protected]> |
There are some (unofficial) patches that may help you at: http://www.candelatech.com/~greear/vlan.html [click the link to the howto, it has the patches] Tristen Rasmussen wrote: > Hi, > > I'm having some trouble with getting vlan (802.1Q) support working with > the version v0.99Y (3c59x.c:v0.99Y 12/16/2002 Donald Becker) of the > 3c59x.c driver with a 2.4.20 kernel. > > I've got a cisco 1200 access point connected directly (via crossover > cable) to a 3com 3c905B NIC. By tracing the cisco's output logs, I can > see that it is indeed sending out a vlan id. However, I see no > indication of the vlan id in the incoming packet as received by the NIC > with the latest 3c59x driver. > > Cisco output: > > 01:19:28 +4768.437500 Packet Alert: Enet Xmit: 00:0b:fd:ea:80:7f -> > 00:10:5a:1b:c9:50 > dot1dTpPort: src=1 dest=1 priority=0 vlanID=5 > DIX: type IP > IP: IPv4 TCP 192.168.157.9 -> 192.168.150.210 ID=0x1184 totalLen=552 > TCP: port [HTTP]80 -> 33779 seq=2036835655 ack=4126180638 dataOffset=5 flags=0x10 window=8192 urgentPointer=0 > > > > My ethereal trace for the NIC shows no indication of a VLAN id. > > I loaded the compiled modules as follows: > > insmod pci-scan > insmod 3c59x > > Is there anything else I need to do to enable the vlan support? > > BTW, I also have the 8021Q module loaded in the kernel too. > > Thanks, > Tristen Rasmussen > -- Ben Greear <[email protected]> <Ben_Greear AT excite.com> President of Candela Technologies Inc http://www.candelatech.com ScryMUD: http://scry.wanfear.com http://scry.wanfear.com/~greear _______________________________________________ vortex mailing list [email protected] http://www.scyld.com/mailman/listinfo/vortex