Re: SuSe 8.2 3c905 question.
Hans-Peter Jansen <[email protected]>
| Newsgroups | gmane.linux.drivers.vortex.devel,gmane.linux.drivers.vortex.user |
|---|---|
| Message-ID | <[email protected]> |
On Monday 16 June 2003 01:13, Steve Milo wrote: > Hi Donald, sorry about replying so late. Right after I sent out this > email I decided to switch back to 8.0 (thats we have been using). > 8.0 worked with no problems at all, however I would be willing to > give 8.2 another shot if I know what I should look for. > Is the driver detection message found in the /var/log/messages file? > Or the /var/log/boot.msg file? On SuSE, the driver is normally loaded as a module, thus /var/log/messages is your best bet. In order to get SuSE 8.2 going, you can also try some of the noapic, pci=nobios, pci=biosirq, acpi=off kernel parameters. Good luck, Pete > Thanks, > Steve M > > On Thursday, Jun 12, 2003, at 17:17 America/Denver, Donald Becker wrote: > > On Thu, 12 Jun 2003, Steve Milo wrote: > >> Greetings all, I am currently responsible for installing 8.2 on a > >> server here and I believe I am having a problem with the 3c905c > >> driver. > >> > >> ifstatus eth0 shows me what I believe to be an ff:ff:ff:ff:ff:ff > >> MAC > > > > What is the driver detection message? > > > > -- > > Donald Becker [email protected] > > Scyld Computing Corporation http://www.scyld.com > > 914 Bay Ridge Road, Suite 220 Scyld Beowulf cluster system > > Annapolis MD 21403 410-990-9993 _______________________________________________ vortex mailing list [email protected] http://www.scyld.com/mailman/listinfo/vortex