Re: Red Hat 8 and Multi Vortex (3c509C-TX 10/100 PCI)
Bogdan Costescu <[email protected]>
| Newsgroups | gmane.linux.drivers.vortex.devel |
|---|---|
| Message-ID | <Pine.LNX.4.44.0307101418450.3717-100000@kenzo.iwr.uni-heidelberg.de> |
On Tue, 8 Jul 2003, Stewart Walker wrote: > ifconfig reports both cards are using IRQ11 memory address for > eth1 is 0x1000 and eth0 is 0x1400 IRQ sharing is fine; it might hurt only if you want very high performance. > eth1 is connected to the Internet and eth0 is connected via a > twisted pair CROSSED (checked) cable to the internal network. What are the tests that you have done and indicated that the cards are not working ? For more low-level (card/driver) diagnostics, you should read http://www.scyld.com/diag/ -- Bogdan Costescu IWR - Interdisziplinaeres Zentrum fuer Wissenschaftliches Rechnen Universitaet Heidelberg, INF 368, D-69120 Heidelberg, GERMANY Telephone: +49 6221 54 8869, Telefax: +49 6221 54 8868 E-mail: [email protected] _______________________________________________ vortex mailing list [email protected] http://www.scyld.com/mailman/listinfo/vortex