Re: 3c59x full duplex -- no hope?
"Jason Choi" <[email protected]>
| Newsgroups | gmane.linux.drivers.vortex.devel |
|---|---|
| Message-ID | <20030714162956.GA4362@panther2> |
this is what i get: registers for MII PHY 1: 2100 784d 0022 5521 01e1 0081 0004 2001 2001 2001 2001 2001 2001 2001 2001 2001 1800 0000 0e90 0000 c060 0002 0fff 8001 19ef 00ff 0000 0000 0044 1000 1a60 0100 prodcut info: Altimta AC101LF rev1 basic mode: 100 Mbit, full duplex basic status: link ok capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD link partner: 100baseTx-HD ** the port I'm doing this is set 100baseTX-FD. Sun, Jul 13, 2003 at 09:05:58PM +0200, Bogdan Costescu wrote: I do get a low tranfer rate, but my kickstart takes, literally hours. When I kickstart it on a port that is set to autonegotiate, it takes 15 minutes. Our network is pretty convoluted, so I can't make my whole network autonegotiate. I would like to make this work on a hardset 100baseTx-FD network. > On Fri, 11 Jul 2003, Jason Choi wrote: > > > mii-tool --force=100baseTx-FD eth0. > > Could you please post the output from "mii-tool -vv" after forcing it to > 100baseTX-FD ? > > > Although it says it works, it doesn't. > > Very descriptive bug report ! What do you call "doesn't work" ? Even with > a duplex mismatch, a low transfer rate can usually be achieved. If you > don't get anything across, you might start looking at the cable... > > -- > Bogdan Costescu > > IWR - Interdisziplinaeres Zentrum fuer Wissenschaftliches Rechnen > Universitaet Heidelberg, INF 368, D-69120 Heidelberg, GERMANY > Telephone: +49 6221 54 8869, Telefax: +49 6221 54 8868 > E-mail: [email protected] > -- ------------------------------------------------------------------ Jason Choi AMD CA NVD _______ CAD Design Engineer 915 DeGuigne Ave. \____ | [email protected] Sunnyvale, CA 94088 /| | | Voice: 408-774-7409 | |___| | |____/ \| ------------------------------------------------------------------ _______________________________________________ vortex mailing list [email protected] http://www.scyld.com/mailman/listinfo/vortex