RE: fLASHING PROBLEM

Hi scott how are you doing? Thanx for your help. My image is on the sram
card of magic ram 2MB. I know now it is the matter of jumping, but I am
confused for how many sec. do I have to jump the jumper j2. When I power =
on
the unit with the j2 jumped and allow it to stand the 4&5 led's glows =
and do
not blink. Nothing comes on the terminal. Shall I have to wait for 4&5 =
led's
to blink alternatively. Also when I remove the j2, they blink with some
periodic interval. Does that suggest something.=20

My confusion and frustration is when to release the jumper j2 so that it
starts booting, now what all I am getting on the terminal is junk, I am =
sure
the image and terminal settings are fine. But this junk seems to be
meaningful:-)

Please suggest about the timing that's I think is critical now.

Gaurav

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Scott Serr
Sent: Wednesday, February 18, 2004 3:40 PM
To: Linux Access Point Development
Subject: Re: [LinuxAP-dev] fLASHING PROBLEM

You need to make sure that the image on your card is correct.  That is=20
the first step, don't take it for granted.  Read it back and do a diff=20
on it from the original image that you wrote to it.  (I had to use a=20
utility called wrflash or something like that from the OpenAP/alerios=20
directory or some such.)

Once you've got that far it is all a matter of timing on the jumper. =20
The jumpering, power on, and unjumpering has to be done at certain=20
times.  It took me about 10 tries to do my first one, even though I read =

how to do it.  The next 3 APs I did on the first or second try.

-Scott

gaurav dawra wrote:

> Hi friends
>
> I am trying to flash the access for some time now. I am using MAGIC=20
> RAM 2MB SRAM card to flash the access point.  I am using EUMITCOMM=20
> Wl11000 rev 3A(USR 2445) and rev 1A. I know Linux AP works well with=20
> USR 2450. Does that make any diffence. If anyone have flashed the=20
> access point successfully please suggest me. I am presently working=20
> for Montana State University Bozeman,MOntana. So if someone living by=20
> can help me out in flashing the AP. I will be really thankful.
>
> Best regards,
>
> Gaurav
>
> _________________________________________________________________
> Get a FREE online computer virus scan from McAfee when you click here. =

> http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3D3963
>
>
> _______________________________________________
> LinuxAP-dev mailing list
> [email protected]
> http://linuxAP.ksmith.com/mailman/listinfo/linuxap-dev



_______________________________________________
LinuxAP-dev mailing list
[email protected]
http://linuxAP.ksmith.com/mailman/listinfo/linuxap-dev