Re: how to expand a container

> -----Original Message-----
> I got this to work:
> deleted volume sda7
> expanded container to include sda7
> 
> I don't know if skipping the deactivation was key, or 
> something else.  I
> think I also have a slightly different set of evms libs now.
> 
> Ross

Ross, I don't know if it applies in your case, but I have found the
"save" button to be very problematic in the evmsgui. For best results, I
normally make one change at a time followed by clicking "save". This
have eliminated nearly all of the issues and ensures that I was
previously encountered.

It is difficult to tell from your description, but it is possible that
you were encountering the same issue I've encountered in the past. Good
luck!

Tony

Anthony Brock
Senior Network Security Engineer
Oregon State University - Network Engineering
http://oregonstate.edu/net/security/

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Evms-devel mailing list
[email protected]
To subscribe/unsubscribe, please visit:
https://lists.sourceforge.net/lists/listinfo/evms-devel