Re: revdep-rebuild
"George Hron" <[email protected]>
| Newsgroups | gmane.linux.gentoo.user.hungarian |
|---|---|
| Message-ID | <[email protected]> |
Hat nem tudom, ez igy nem tunik a legjobb otletnek. Valoszinu, hogy kiolvassa a symlinket. Szerintem a /var/cache -t szedd le a /var/mnt alol. Masik lehetoseg a /var/mnt helyett a /var-ba mountolni, a szerverek cuccait meg szepen eltenni onnan, mondjuk a /srv konyvtarba (en ezt szoktam eleve csinalni). 2008/10/4 cjvt <[email protected]> > Üdv, > > elöljáróban: > > az érintett rendszeren a következő symlinkek léteznek (mármint adekvát) a > /var > könyvtár alatt: > > lrwxrwxrwx 1 amavis amavis 15 jún 11 14.26 amavis -> /var/mnt/amavis > lrwxrwxrwx 1 root root 14 jún 11 14.26 cache -> /var/mnt/cache > lrwxrwxrwx 1 root root 12 jún 11 14.26 tmp -> /var/mnt/tmp > > A /var/mnt tartalma > > # ls -la /var/mnt/ > összesen 20 > drwxr-xr-x 5 root root 4096 jún 11 14.32 . > drwxr-xr-x 14 root root 4096 jún 11 14.26 .. > drwxr-xr-x 8 amavis amavis 4096 szept 28 15.34 amavis > drwxr-xr-x 9 root root 4096 okt 4 09.56 cache > drwxrwxrwt 8 root root 4096 okt 4 10.27 tmp > > A /var könyvtár a /-el megegyező, a /var/mnt egy másik partíció. > > Ezzel eleddig semmiféle probléma nem akadt. > > A mai napom azonban frissítettem > > app-portage/gentoolkit-0.2.4.2 -re > > azota a revdep-rebuild a következő hibát dobja: > > # revdep-rebuild > * Configuring search environment for revdep-rebuild > * Working directory expected to be /var/cache/revdep-rebuild, but it > is /var/mnt/cache/revdep-rebuild > > Van vkinek ötlete, hogy miért, és hogyan is lehetne lebeszélni a > hibaüzenetről? > > > vt > > > a revdep-rebuild -d kimenete (a közvetlenül erintett rész a legvégén): > > + getopts :CdehikL:loPpqu:vX OPT > + unset args > + [[ -n '' ]] > + setup_color > portageq envvar NOCOLOR > ++ portageq envvar NOCOLOR > + export NOCOLOR= > + NOCOLOR= > + [[ '' = yes ]] > + [[ '' = true ]] > + . /etc/init.d/functions.sh > # Copyright 1999-2007 Gentoo Foundation > # Distributed under the terms of the GNU General Public License v2 > > RC_GOT_FUNCTIONS="yes" > ++ RC_GOT_FUNCTIONS=yes > > # Override defaults with user settings ... > [[ -f /etc/conf.d/rc ]] && source /etc/conf.d/rc > ++ [[ -f /etc/conf.d/rc ]] > ++ source /etc/conf.d/rc > # /etc/conf.d/rc: Global config file for the Gentoo RC System > > # This is the number of tty's used in most of the rc-scripts (like > # consolefont, numlock, etc ...) > > RC_TTY_NUMBER=11 > +++ RC_TTY_NUMBER=11 > > # Set to "yes" if you want the rc system to try and start services > # in parallel for a slight speed improvement. NOTE: When > RC_PARALLEL_STARTUP > # is enabled, init script output is replaced with simple "service foo > # starting/stopping" messages so that output is not mixed up. > # You can stop this from happening on the command line by passing --verbose > # to the init script or by setting RC_VERBOSE="yes" below. > > RC_PARALLEL_STARTUP="no" > +++ RC_PARALLEL_STARTUP=no > > # Set RC_INTERACTIVE to "yes" and you'll be able to press the I key during > # boot so you can choose to start specific services. Set to "no" to disable > # this feature. > > RC_INTERACTIVE="yes" > +++ RC_INTERACTIVE=yes > > # Do we allow services to be hotplugged? If not, set to RC_HOTPLUG="no" > # NOTE: This does not affect anything hotplug/udev related, just the > # starting/stopping of the init.d service triggered by hotplug. > > RC_HOTPLUG="yes" > +++ RC_HOTPLUG=yes > > # Dynamic /dev managers can trigger coldplug events which cause services to > # start before we are ready for them. If this happens, we can defer these > # services to start in the boot runlevel. Set RC_COLDPLUG="no" if you don't > # want this. > # NOTE: This also affects module coldplugging in udev-096 and higher > # If you want module coldplugging but not coldplugging of services then you > # can set RC_COLDPLUG="yes" and RC_PLUG_SERVICES="!*" > > RC_COLDPLUG="yes" > +++ RC_COLDPLUG=yes > > # Some people want a finer grain over hotplug/coldplug. RC_PLUG_SERVICES is > a > # list of services that are matched in order, either allowing or not. By > # default we allow services through as RC_COLDPLUG/RC_HOTPLUG has to be yes > # anyway. > # Example - RC_PLUG_SERVICES="net.wlan !net.*" > # This allows net.wlan and any service not matching net.* to be plugged. > > RC_PLUG_SERVICES="" > +++ RC_PLUG_SERVICES= > > # RC_NET_STRICT_CHECKING allows some flexibility with the 'net' service. > # The following values are allowed: > # none - The 'net' service is always considered up. > # no - This basically means that at least one net.* service besides > net.lo > # must be up. This can be used by notebook users that have a wifi > and > # a static nic, and only wants one up at any given time to have > the > # 'net' service seen as up. > # lo - This is the same as the 'no' option, but net.lo is also counted. > # This should be useful to people that do not care about any > specific > # interface being up at boot. > # yes - For this ALL network interfaces MUST be up for the 'net' service > to > # be considered up. > > RC_NET_STRICT_CHECKING="no" > +++ RC_NET_STRICT_CHECKING=no > > # RC_DOWN_INTERFACE allows you to specify if RC will bring the interface > # completely down when it stops. The default is yes, but there are some > # instances where you may not want this to happen such as using Wake On > LAN. > > RC_DOWN_INTERFACE="yes" > +++ RC_DOWN_INTERFACE=yes > > # RC_VOLUME_ORDER allows you to specify, or even remove the volume setup > # for various volume managers (MD, EVMS2, LVM, DM, etc). Note that they > are > # stopped in reverse order. > > RC_VOLUME_ORDER="raid evms lvm dm" > +++ RC_VOLUME_ORDER='raid evms lvm dm' > > # RC_VERBOSE will make init scripts more verbose. Only networking scripts > # really use this at this time, and this is useful for trouble shooting > # any issues you may have. > # This is also used to re-enable init script output for init scripts > # started or stopped from the command line. > > RC_VERBOSE="no" > +++ RC_VERBOSE=no > > # RC_BOOTLOG will generate a log of the boot messages shown on the console. > # Useful for headless machines or debugging. You need to emerge the > # app-admin/showconsole package for this to work. Note that this probably > # won't work correctly with boot splash. > > RC_BOOTLOG="no" > +++ RC_BOOTLOG=no > > # Set to "yes" if you want to benchmark system boot with bootchart. > # You'll need to emerge the app-benchmarks/bootchart package for this to > work. > > RC_BOOTCHART="no" > +++ RC_BOOTCHART=no > > # RC_USE_FSTAB allows you to override the default mount options for the > # standard /proc, /sys, /dev, and /dev/pts mount points. Note that this > # is the new way for selecting ramfs/tmpfs/etc... for udev mounting. > > RC_USE_FSTAB="no" > +++ RC_USE_FSTAB=no > > # RC_USE_CONFIG_PROFILE allows you to have different /etc/conf.d files > # based on your runlevel - if a conf.d file for your profile does not exist > # then we try and use the default one. > # To enable runlevel selection at boot, append "softlevel=foobar" to your > # kernel line to change to the foobar runlevel. Here we would search for > # /etc/conf.d/<service>.foobar config files before trying to use the > default > # /etc/conf.d/<service>. > # Note that it is only active if 'softlevel' was specified via the kernel > line, > # and it is intended to use for different grub/lilo entries to specify > config > # changes for say laptops between home and work, where you would have setup > # 'work' and 'home' runlevels, with /etc/conf.d/*.<runlevel> as needed. > > RC_USE_CONFIG_PROFILE="yes" > +++ RC_USE_CONFIG_PROFILE=yes > > # RC_FORCE_AUTO tries its best to prevent user interaction during the boot > and > # shutdown process. For example, fsck will automatically be run or volumes > # remounted to create proper directory trees. This feature can be > dangerous > # and is meant ONLY for headless machines where getting a physical console > # hooked up is a huge pita. > > RC_FORCE_AUTO="no" > +++ RC_FORCE_AUTO=no > > # Use this variable to control the /dev management behavior. > # auto - let the scripts figure out what's best at boot > # devfs - use devfs (requires sys-fs/devfsd) > # udev - use udev (requires sys-fs/udev) > # static - let the user manage /dev (YOU need to create ALL device nodes) > > RC_DEVICES="auto" > +++ RC_DEVICES=auto > > # UDEV OPTION: > # Set to "yes" if you want to save /dev to a tarball on shutdown > # and restore it on startup. This is useful if you have a lot of > # custom device nodes that udev does not handle/know about. > > RC_DEVICE_TARBALL="no" > +++ RC_DEVICE_TARBALL=no > > # RC_DMESG_LEVEL sets the level at which logging of messages is done to the > # console. See dmesg(8) for more info. > > RC_DMESG_LEVEL="1" > +++ RC_DMESG_LEVEL=1 > > > > > > # > # Controlling start-stop-daemon behavior > > # Set to "yes" if start-stop-daemon should always retry killing the > # service with sig KILL if it fails the first time. > > RC_RETRY_KILL="yes" > +++ RC_RETRY_KILL=yes > > > # Set the amount of seconds start-stop-daemon should wait between > # retries. > > RC_RETRY_TIMEOUT=1 > +++ RC_RETRY_TIMEOUT=1 > > > # Set the amount of times start-stop-daemon should try to kill > # a service before giving up. > > RC_RETRY_COUNT=5 > +++ RC_RETRY_COUNT=5 > > > # Set to "yes" if start-stop-daemon should fail if the service > # is marked as started, but not actually running on stop. > > RC_FAIL_ON_ZOMBIE="no" > +++ RC_FAIL_ON_ZOMBIE=no > > > # Set to "yes" if start-stop-daemon should attempt to kill > # any children left in the system. > # Be careful with this as it really does what it was on the tin. > # fex, if you're in an ssh process and you restart a service on which ssh > # depends then your terminal will be killed also. > > RC_KILL_CHILDREN="no" > +++ RC_KILL_CHILDREN=no > > > # Set the amount of seconds start-stop-daemon waits after starting > # the daemon to check it is still running. If it's not then we > # try and stop any children if possible. > RC_WAIT_ON_START="0.1" > +++ RC_WAIT_ON_START=0.1 > > > > ############################################################################## > # SERVICE CONFIGURATION VARIABLES > # These variables are documented here, but should be configured in > # /etc/conf.d/foo for service foo and NOT enabled here unless you > # really want them to work on a global basis. > > # Some daemons are started and stopped via start-stop-daemon. > # We can launch them through other daemons here, for example valgrind. > # This is only useful for serious debugging of the daemon > # WARNING: If the script's "stop" function does not supply a PID file then > # all processes using the same daemon will be killed. > #RC_DAEMON="/usr/bin/valgrind --tool=memcheck > --log-file=/tmp/valgrind.syslog-ng" > > # strace needs to be prefixed with --background as it does not detach when > # it's following > #RC_DAEMON="--background /usr/sbin/strace -f -o /tmp/strace.syslog-ng" > > # Pass ulimit parameters > #RC_ULIMIT="-u 30" > > > ############################################################################## > > > # > # Internal configuration variables > # > # NB: These are for advanced users, and you should really > # know what you are doing before changing them! > # > > # rc-scripts dep-cache directory > # > # NOTE: Do not remove the next line, as its needed by the baselayout > ebuild! > # > # svcdir="/var/lib/init.d" > > svcdir="/var/lib/init.d" > +++ svcdir=/var/lib/init.d > > # Should we mount $svcdir in a ram disk for some speed increase > # for slower machines, or for the more extreme setups ? > > svcmount="no" > +++ svcmount=no > > # FS type that should be used for $svcdir. Note that you need > # $svcmount above set to "yes" for this to work ... Currently > # tmpfs, ramfs, and ramdisk are supported (tmpfs is the default). > > svcfstype="tmpfs" > +++ svcfstype=tmpfs > > # Size of $svcdir in KB. Note that ramfs doesn't support this > # due to kernel limitations. > > svcsize=2048 > +++ svcsize=2048 > > # Check /etc/conf.d/rc for a description of these ... > declare -r svclib="/lib/rcscripts" > ++ declare -r svclib=/lib/rcscripts > declare -r svcdir="${svcdir:-/var/lib/init.d}" > ++ declare -r svcdir=/var/lib/init.d > svcmount="${svcmount:-no}" > ++ svcmount=no > svcfstype="${svcfstype:-tmpfs}" > ++ svcfstype=tmpfs > svcsize="${svcsize:-1024}" > ++ svcsize=2048 > > # Different types of dependencies > deptypes="need use" > ++ deptypes='need use' > # Different types of order deps > ordtypes="before after" > ++ ordtypes='before after' > > # > # Internal variables > # > > # Dont output to stdout? > RC_QUIET_STDOUT="${RC_QUIET_STDOUT:-no}" > ++ RC_QUIET_STDOUT=no > RC_VERBOSE="${RC_VERBOSE:-no}" > ++ RC_VERBOSE=no > > # Should we use color? > RC_NOCOLOR="${RC_NOCOLOR:-no}" > ++ RC_NOCOLOR=no > # Can the terminal handle endcols? > RC_ENDCOL="yes" > ++ RC_ENDCOL=yes > > # > # Default values for rc system > # > RC_TTY_NUMBER="${RC_TTY_NUMBER:-11}" > ++ RC_TTY_NUMBER=11 > RC_PARALLEL_STARTUP="${RC_PARALLEL_STARTUP:-no}" > ++ RC_PARALLEL_STARTUP=no > RC_NET_STRICT_CHECKING="${RC_NET_STRICT_CHECKING:-no}" > ++ RC_NET_STRICT_CHECKING=no > RC_USE_FSTAB="${RC_USE_FSTAB:-no}" > ++ RC_USE_FSTAB=no > RC_USE_CONFIG_PROFILE="${RC_USE_CONFIG_PROFILE:-yes}" > ++ RC_USE_CONFIG_PROFILE=yes > RC_FORCE_AUTO="${RC_FORCE_AUTO:-no}" > ++ RC_FORCE_AUTO=no > RC_DEVICES="${RC_DEVICES:-auto}" > ++ RC_DEVICES=auto > RC_DOWN_INTERFACE="${RC_DOWN_INTERFACE:-yes}" > ++ RC_DOWN_INTERFACE=yes > RC_VOLUME_ORDER="${RC_VOLUME_ORDER:-raid evms lvm dm}" > ++ RC_VOLUME_ORDER='raid evms lvm dm' > > # > # Default values for e-message indentation and dots > # > RC_INDENTATION='' > ++ RC_INDENTATION= > RC_DEFAULT_INDENT=2 > ++ RC_DEFAULT_INDENT=2 > #RC_DOT_PATTERN=' .' > RC_DOT_PATTERN='' > ++ RC_DOT_PATTERN= > > # bool has_addon(addon) > # > # See if addon exists. > # > has_addon() { > [[ -e ${svclib}/addons/$1 ]] > } > > # void import_addon(char *addon) > # > # Import code from the specified addon if it exists > # > import_addon() { > local addon="${svclib}/addons/$1" > if has_addon $1 ; then > source "${addon}" > return 0 > fi > return 1 > } > > # void splash(...) > # > # Notify bootsplash/splashutils/gensplash/whatever about > # important events. > # > splash() { > return 0 > } > # This will override the splash() function... > if ! import_addon splash-functions.sh ; then > [[ -f /sbin/splash-functions.sh ]] && source > /sbin/splash-functions.sh > fi > ++ import_addon splash-functions.sh > ++ local addon=/lib/rcscripts/addons/splash-functions.sh > ++ has_addon splash-functions.sh > ++ [[ -e /lib/rcscripts/addons/splash-functions.sh ]] > ++ return 1 > ++ [[ -f /sbin/splash-functions.sh ]] > > # void profiling(...) > # > # Notify bootsplash/whatever about important events. > # > profiling() { > return 0 > } > import_addon profiling-functions.sh > ++ import_addon profiling-functions.sh > ++ local addon=/lib/rcscripts/addons/profiling-functions.sh > ++ has_addon profiling-functions.sh > ++ [[ -e /lib/rcscripts/addons/profiling-functions.sh ]] > ++ return 1 > > # void bootlog(...) > # > # Notify bootlogger about important events. > bootlog() { > return 0 > } > [[ ${RC_BOOTLOG} == "yes" ]] && import_addon bootlogger.sh > ++ [[ no == \y\e\s ]] > > # void get_bootconfig() > # > # Get the BOOTLEVEL and SOFTLEVEL by setting > # 'bootlevel' and 'softlevel' via kernel > # parameters. > # > get_bootconfig() { > local copt= > local newbootlevel= > local newsoftlevel= > > if [[ -r /proc/cmdline ]] ; then > for copt in $(</proc/cmdline) ; do > case "${copt%=*}" in > bootlevel) > newbootlevel="${copt##*=}" > ;; > softlevel) > newsoftlevel="${copt##*=}" > ;; > esac > done > fi > > if [[ -n ${newbootlevel} ]] ; then > export BOOTLEVEL="${newbootlevel}" > else > export BOOTLEVEL="boot" > fi > > if [[ -n ${newsoftlevel} ]] ; then > export DEFAULTLEVEL="${newsoftlevel}" > else > export DEFAULTLEVEL="default" > fi > > return 0 > } > > setup_defaultlevels() { > get_bootconfig > > if get_bootparam "noconfigprofile" ; then > export RC_USE_CONFIG_PROFILE="no" > > elif get_bootparam "configprofile" ; then > export RC_USE_CONFIG_PROFILE="yes" > fi > > if [[ ${RC_USE_CONFIG_PROFILE} == "yes" && -n ${DEFAULTLEVEL} ]] && > \ > [[ -d "/etc/runlevels/${BOOTLEVEL}.${DEFAULTLEVEL}" || \ > -L "/etc/runlevels/${BOOTLEVEL}.${DEFAULTLEVEL}" ]] ; then > export BOOTLEVEL="${BOOTLEVEL}.${DEFAULTLEVEL}" > fi > > if [[ -z ${SOFTLEVEL} ]] ; then > if [[ -f "${svcdir}/softlevel" ]] ; then > export SOFTLEVEL=$(< "${svcdir}/softlevel") > else > export SOFTLEVEL="${BOOTLEVEL}" > fi > fi > > return 0 > } > > # void get_libdir(void) > # > # prints the current libdir {lib,lib32,lib64} > # > get_libdir() { > if [[ -n ${CONF_LIBDIR_OVERRIDE} ]] ; then > CONF_LIBDIR="${CONF_LIBDIR_OVERRIDE}" > elif [[ -x /usr/bin/portageq ]] ; then > CONF_LIBDIR="$(/usr/bin/portageq envvar CONF_LIBDIR)" > fi > echo "${CONF_LIBDIR:=lib}" > } > > # void esyslog(char* priority, char* tag, char* message) > # > # use the system logger to log a message > # > esyslog() { > local pri= > local tag= > > if [[ -x /usr/bin/logger ]] ; then > pri="$1" > tag="$2" > > shift 2 > [[ -z "$*" ]] && return 0 > > /usr/bin/logger -p "${pri}" -t "${tag}" -- "$*" > fi > > return 0 > } > > # void eindent(int num) > # > # increase the indent used for e-commands. > # > eindent() { > local i="$1" > (( i > 0 )) || (( i = RC_DEFAULT_INDENT )) > esetdent $(( ${#RC_INDENTATION} + i )) > } > > # void eoutdent(int num) > # > # decrease the indent used for e-commands. > # > eoutdent() { > local i="$1" > (( i > 0 )) || (( i = RC_DEFAULT_INDENT )) > esetdent $(( ${#RC_INDENTATION} - i )) > } > > # void esetdent(int num) > # > # hard set the indent used for e-commands. > # num defaults to 0 > # > esetdent() { > local i="$1" > (( i < 0 )) && (( i = 0 )) > RC_INDENTATION=$(printf "%${i}s" '') > } > > # void einfo(char* message) > # > # show an informative message (with a newline) > # > einfo() { > einfon "$*\n" > LAST_E_CMD="einfo" > return 0 > } > > # void einfon(char* message) > # > # show an informative message (without a newline) > # > einfon() { > [[ ${RC_QUIET_STDOUT} == "yes" ]] && return 0 > [[ ${RC_ENDCOL} != "yes" && ${LAST_E_CMD} == "ebegin" ]] && echo > echo -ne " ${GOOD}*${NORMAL} ${RC_INDENTATION}$*" > LAST_E_CMD="einfon" > return 0 > } > > # void ewarn(char* message) > # > # show a warning message + log it > # > ewarn() { > if [[ ${RC_QUIET_STDOUT} == "yes" ]] ; then > echo " $*" > else > [[ ${RC_ENDCOL} != "yes" && ${LAST_E_CMD} == "ebegin" ]] && > echo > echo -e " ${WARN}*${NORMAL} ${RC_INDENTATION}$*" > fi > > local name="rc-scripts" > [[ $0 != "/sbin/runscript.sh" ]] && name="${0##*/}" > # Log warnings to system log > esyslog "daemon.warning" "${name}" "$*" > > LAST_E_CMD="ewarn" > return 0 > } > > # void eerror(char* message) > # > # show an error message + log it > # > eerror() { > if [[ ${RC_QUIET_STDOUT} == "yes" ]] ; then > echo " $*" >/dev/stderr > else > [[ ${RC_ENDCOL} != "yes" && ${LAST_E_CMD} == "ebegin" ]] && > echo > echo -e " ${BAD}*${NORMAL} ${RC_INDENTATION}$*" > fi > > local name="rc-scripts" > [[ $0 != "/sbin/runscript.sh" ]] && name="${0##*/}" > # Log errors to system log > esyslog "daemon.err" "rc-scripts" "$*" > > LAST_E_CMD="eerror" > return 0 > } > > # void ebegin(char* message) > # > # show a message indicating the start of a process > # > ebegin() { > local msg="$*" dots spaces="${RC_DOT_PATTERN//?/ }" > [[ ${RC_QUIET_STDOUT} == "yes" ]] && return 0 > > if [[ -n ${RC_DOT_PATTERN} ]] ; then > dots="$(printf "%$((COLS - 3 - ${#RC_INDENTATION} - ${#msg} > - > 7))s" '')" > dots="${dots//${spaces}/${RC_DOT_PATTERN}}" > msg="${msg}${dots}" > else > msg="${msg} ..." > fi > einfon "${msg}" > [[ ${RC_ENDCOL} == "yes" ]] && echo > > LAST_E_LEN="$(( 3 + ${#RC_INDENTATION} + ${#msg} ))" > LAST_E_CMD="ebegin" > return 0 > } > > # void _eend(int error, char *efunc, char* errstr) > # > # indicate the completion of process, called from eend/ewend > # if error, show errstr via efunc > # > # This function is private to functions.sh. Do not call it from a > # script. > # > _eend() { > local retval="${1:-0}" efunc="${2:-eerror}" msg > shift 2 > > if [[ ${retval} == "0" ]] ; then > [[ ${RC_QUIET_STDOUT} == "yes" ]] && return 0 > msg="${BRACKET}[ ${GOOD}ok${BRACKET} ]${NORMAL}" > else > if [[ -c /dev/null ]] ; then > rc_splash "stop" &>/dev/null & > else > rc_splash "stop" & > fi > if [[ -n $* ]] ; then > ${efunc} "$*" > fi > msg="${BRACKET}[ ${BAD}!!${BRACKET} ]${NORMAL}" > fi > > if [[ ${RC_ENDCOL} == "yes" ]] ; then > echo -e "${ENDCOL} ${msg}" > else > [[ ${LAST_E_CMD} == ebegin ]] || LAST_E_LEN=0 > printf "%$(( COLS - LAST_E_LEN - 6 ))s%b\n" '' "${msg}" > fi > > return ${retval} > } > > # void eend(int error, char* errstr) > # > # indicate the completion of process > # if error, show errstr via eerror > # > eend() { > local retval="${1:-0}" > shift > > _eend "${retval}" eerror "$*" > > LAST_E_CMD="eend" > return ${retval} > } > > # void ewend(int error, char* errstr) > # > # indicate the completion of process > # if error, show errstr via ewarn > # > ewend() { > local retval="${1:-0}" > shift > > _eend "${retval}" ewarn "$*" > > LAST_E_CMD="ewend" > return ${retval} > } > > # v-e-commands honor RC_VERBOSE which defaults to no. > # The condition is negated so the return value will be zero. > veinfo() { [[ ${RC_VERBOSE} != "yes" ]] || einfo "$@"; } > veinfon() { [[ ${RC_VERBOSE} != "yes" ]] || einfon "$@"; } > vewarn() { [[ ${RC_VERBOSE} != "yes" ]] || ewarn "$@"; } > veerror() { [[ ${RC_VERBOSE} != "yes" ]] || eerror "$@"; } > vebegin() { [[ ${RC_VERBOSE} != "yes" ]] || ebegin "$@"; } > veend() { > [[ ${RC_VERBOSE} == "yes" ]] && { eend "$@"; return $?; } > return ${1:-0} > } > vewend() { > [[ ${RC_VERBOSE} == "yes" ]] && { ewend "$@"; return $?; } > return ${1:-0} > } > > # char *KV_major(string) > # > # Return the Major (X of X.Y.Z) kernel version > # > KV_major() { > [[ -z $1 ]] && return 1 > > local KV="$@" > echo "${KV%%.*}" > } > > # char *KV_minor(string) > # > # Return the Minor (Y of X.Y.Z) kernel version > # > KV_minor() { > [[ -z $1 ]] && return 1 > > local KV="$@" > KV="${KV#*.}" > echo "${KV%%.*}" > } > > # char *KV_micro(string) > # > # Return the Micro (Z of X.Y.Z) kernel version. > # > KV_micro() { > [[ -z $1 ]] && return 1 > > local KV="$@" > KV="${KV#*.*.}" > echo "${KV%%[^[:digit:]]*}" > } > > # int KV_to_int(string) > # > # Convert a string type kernel version (2.4.0) to an int (132096) > # for easy compairing or versions ... > # > KV_to_int() { > [[ -z $1 ]] && return 1 > > local KV_MAJOR="$(KV_major "$1")" > local KV_MINOR="$(KV_minor "$1")" > local KV_MICRO="$(KV_micro "$1")" > local KV_int="$(( KV_MAJOR * 65536 + KV_MINOR * 256 + KV_MICRO ))" > > # We make version 2.2.0 the minimum version we will handle as > # a sanity check ... if its less, we fail ... > if [[ ${KV_int} -ge 131584 ]] ; then > echo "${KV_int}" > return 0 > fi > > return 1 > } > > # int get_KV() > # > # Return the kernel version (major, minor and micro concated) as an > integer. > # Assumes X and Y of X.Y.Z are numbers. Also assumes that some leading > # portion of Z is a number. > # e.g. 2.4.25, 2.6.10, 2.6.4-rc3, 2.2.40-poop, 2.0.15+foo > # > _RC_GET_KV_CACHE="" > ++ _RC_GET_KV_CACHE= > get_KV() { > [[ -z ${_RC_GET_KV_CACHE} ]] \ > && _RC_GET_KV_CACHE="$(uname -r)" > > echo "$(KV_to_int "${_RC_GET_KV_CACHE}")" > > return $? > } > > # bool get_bootparam(param) > # > # return 0 if gentoo=param was passed to the kernel > # > # EXAMPLE: if get_bootparam "nodevfs" ; then .... > # > get_bootparam() { > local x copt params retval=1 > > [[ ! -r /proc/cmdline ]] && return 1 > > for copt in $(< /proc/cmdline) ; do > if [[ ${copt%=*} == "gentoo" ]] ; then > params=$(gawk -v PARAMS="${copt##*=}" ' > BEGIN { > split(PARAMS, nodes, ",") > for (x in nodes) > print nodes[x] > }') > > # Parse gentoo option > for x in ${params} ; do > if [[ ${x} == "$1" ]] ; then > # echo "YES" > retval=0 > fi > done > fi > done > > return ${retval} > } > > # Safer way to list the contents of a directory, > # as it do not have the "empty dir bug". > # > # char *dolisting(param) > # > # print a list of the directory contents > # > # NOTE: quote the params if they contain globs. > # also, error checking is not that extensive ... > # > dolisting() { > local x= > local y= > local tmpstr= > local mylist= > local mypath="$*" > > if [[ ${mypath%/\*} != "${mypath}" ]] ; then > mypath=${mypath%/\*} > fi > > for x in ${mypath} ; do > [[ ! -e ${x} ]] && continue > > if [[ ! -d ${x} ]] && [[ -L ${x} || -f ${x} ]] ; then > mylist="${mylist} $(ls "${x}" 2> /dev/null)" > else > [[ ${x%/} != "${x}" ]] && x=${x%/} > > cd "${x}"; tmpstr=$(ls) > > for y in ${tmpstr} ; do > mylist="${mylist} ${x}/${y}" > done > fi > done > > echo "${mylist}" > } > > > # char *add_suffix(char * configfile) > # > # Returns a config file name with the softlevel suffix > # appended to it. For use with multi-config services. > add_suffix() { > if [[ ${RC_USE_CONFIG_PROFILE} != "yes" ]] ; then > echo "$1" > return 0 > fi > > local suffix="${SOFTLEVEL}" > [[ ${SOFTLEVEL} == "${BOOTLEVEL}" \ > || ${SOFTLEVEL} == "reboot" \ > || ${SOFTLEVEL} == "shutdown" \ > || ${SOFTLEVEL} == "single" ]] \ > && suffix="${DEFAULTLEVEL}" > if [[ -e "$1.${suffix}" ]] ; then > echo "$1.${suffix}" > else > echo "$1" > fi > > return 0 > } > > # char *get_base_ver() > # > # get the version of baselayout that this system is running > # > get_base_ver() { > [[ ! -r /etc/gentoo-release ]] && return 0 > local ver="$(</etc/gentoo-release)" > echo "${ver##* }" > } > > # Network filesystems list for common use in rc-scripts. > # This variable is used in is_net_fs and other places such as > # localmount. > NET_FS_LIST="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs" > ++ NET_FS_LIST='afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs > smbfs' > > # bool is_net_fs(path) > # > # return 0 if path is the mountpoint of a networked filesystem > # > # EXAMPLE: if is_net_fs / ; then ... > # > is_net_fs() { > local fstype > # /proc/mounts is always accurate but may not always be available > if [[ -e /proc/mounts ]] ; then > fstype="$( sed -n -e '/^rootfs/!s:.* '"$1"' \([^ ]*\).*: > \1:p' /proc/mounts )" > else > fstype="$( mount | sed -n -e 's:.* on '"$1"' type \([^ > ]*\).*: > \1:p' )" > fi > [[ " ${NET_FS_LIST} " == *" ${fstype} "* ]] > return $? > } > > # bool is_net_fs(path) > # > # return 0 if path is under unionfs control > # > # EXAMPLE: if is_union_fs / ; then ... > # > is_union_fs() { > [[ ! -x /sbin/unionctl ]] && return 1 > unionctl "$1" --list &>/dev/null > } > > # bool is_uml_sys() > # > # return 0 if the currently running system is User Mode Linux > # > # EXAMPLE: if is_uml_sys ; then ... > # > is_uml_sys() { > grep -qs 'UML' /proc/cpuinfo > } > > # bool is_vserver_sys() > # > # return 0 if the currently running system is a Linux VServer > # > # EXAMPLE: if is_vserver_sys ; then ... > # > is_vserver_sys() { > grep -qs '^s_context:[[:space:]]*[1-9]' /proc/self/status > } > > # bool is_vz_sys() > # > # return 0 if the currently running system is OpenVZ container > # > # EXAMPLE: if is_vz_sys ; then ... > # > is_vz_sys() { > grep -qs '^envID:[[:space:]]*[1-9]' /proc/self/status > } > > # bool is_xenU_sys() > # > # return 0 if the currently running system is an unprivileged Xen domain > # > # EXAMPLE: if is_xenU_sys ; then ... > # > is_xenU_sys() { > [[ ! -d /proc/xen ]] && return 1 > [[ ! -r /proc/xen/capabilities ]] && return 1 > grep -q "control_d" /proc/xen/capabilities && return 1 > return 0 > } > > # bool get_mount_fstab(path) > # > # return the parameters to pass to the mount command generated from fstab > # > # EXAMPLE: cmd=$( get_mount_fstab /proc ) > # cmd=${cmd:--t proc none /proc} > # mount -n ${cmd} > # > get_mount_fstab() { > gawk '$1 ~ "^#" { next } > $2 == "'$*'" { stab="-t "$3" -o "$4" "$1" "$2; } > END { print stab; } > ' /etc/fstab > } > > # char *reverse_list(list) > # > # Returns the reversed order of list > # > reverse_list() { > for (( i = $# ; i > 0 ; --i )) ; do > echo -n "${!i} " > done > } > > # void start_addon(addon) > # > # Starts addon. > # > start_addon() { > local addon="$1" > (import_addon "${addon}-start.sh") > return 0 > } > > # void stop_addon(addon) > # > # Stops addon. > # > stop_addon() { > local addon=$1 > (import_addon "${addon}-stop.sh") > return 0 > } > > # bool is_older_than(reference, files/dirs to check) > # > # return 0 if any of the files/dirs are newer than > # the reference file > # > # EXAMPLE: if is_older_than a.out *.o ; then ... > is_older_than() { > local x= > local ref="$1" > shift > > for x in "$@" ; do > [[ ${x} -nt ${ref} ]] && return 0 > [[ -d ${x} ]] && is_older_than "${ref}" "${x}"/* && return 0 > done > > return 1 > } > > # char* bash_variable(char *variable) > # > # Turns the given variable into something that bash can use > # Basically replaces anything not a-z,A-Z into a _ > # > bash_variable() { > local args="$@" > LC_ALL=C echo "${args//[![:word:]]/_}" > } > > # void requote() > # > # Requotes params so they're suitable to be eval'd, just like this would: > # set -- 1 2 "3 4" > # /usr/bin/getopt -- '' "$@" | sed 's/^ -- //' > # > requote() { > local q=\' > set -- "${@//\'/$q\'$q}" # quote inner instances of ' > set -- "${@/#/$q}" # add ' to start of each > param > set -- "${@/%/$q}" # add ' to end of each param > echo "$*" > } > > # char* uniqify(char *arg, ...) > # > # Ensure that params are unique > # > uniqify() { > local result= x= > while [[ -n "$1" ]] ; do > [[ " ${result} " != *" $1 "* ]] && result="${result} $1" > shift > done > echo "${result# *}" > } > > > ############################################################################## > # > # > # This should be the last code in here, please add all functions above!! > # > # > # > # *** START LAST CODE *** > # > # > # > > ############################################################################## > > if [[ -z ${EBUILD} ]] ; then > # Setup a basic $PATH. Just add system default to existing. > # This should solve both /sbin and /usr/sbin not present when > # doing 'su -c foo', or for something like: PATH= rcscript start > PATH="/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/sbin:${PATH}" > > # Cache the CONSOLETYPE - this is important as backgrounded shells > don't > # have a TTY. rc unsets it at the end of running so it shouldn't > hang > # around > if [[ -z ${CONSOLETYPE} ]] ; then > export CONSOLETYPE="$( /sbin/consoletype 2>/dev/null )" > fi > if [[ ${CONSOLETYPE} == "serial" ]] ; then > RC_NOCOLOR="yes" > RC_ENDCOL="no" > fi > > for arg in "$@" ; do > case "${arg}" in > # Lastly check if the user disabled it with > --nocolor > argument > --nocolor|-nc) > RC_NOCOLOR="yes" > ;; > esac > done > > setup_defaultlevels > > # If we are not /sbin/rc then ensure that we cannot change level > variables > if [[ -n ${BASH_SOURCE} \ > && ${BASH_SOURCE[${#BASH_SOURCE[@]}-1]} != "/sbin/rc" ]] ; > then > declare -r BOOTLEVEL DEFAULTLEVEL SOFTLEVEL > fi > else > # Should we use colors ? > if [[ $* != *depend* ]] ; then > # Check user pref in portage > RC_NOCOLOR="$(portageq envvar NOCOLOR 2>/dev/null)" > [[ ${RC_NOCOLOR} == "true" ]] && RC_NOCOLOR="yes" > else > # We do not want colors during emerge depend > RC_NOCOLOR="yes" > # No output is seen during emerge depend, so this is not > needed. > RC_ENDCOL="no" > fi > fi > ++ [[ -z '' ]] > ++ > > PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin > ++ [[ -z '' ]] > /sbin/consoletype 2>/dev/null > +++ /sbin/consoletype > ++ export CONSOLETYPE=pty > ++ CONSOLETYPE=pty > ++ [[ pty == \s\e\r\i\a\l ]] > ++ setup_defaultlevels > ++ get_bootconfig > ++ local copt= > ++ local newbootlevel= > ++ local newsoftlevel= > ++ [[ -r /proc/cmdline ]] > </proc/cmdline > ++ for copt in '$(</proc/cmdline)' > ++ case "${copt%=*}" in > ++ for copt in '$(</proc/cmdline)' > ++ case "${copt%=*}" in > ++ for copt in '$(</proc/cmdline)' > ++ case "${copt%=*}" in > ++ for copt in '$(</proc/cmdline)' > ++ case "${copt%=*}" in > ++ for copt in '$(</proc/cmdline)' > ++ case "${copt%=*}" in > ++ [[ -n '' ]] > ++ export BOOTLEVEL=boot > ++ BOOTLEVEL=boot > ++ [[ -n '' ]] > ++ export DEFAULTLEVEL=default > ++ DEFAULTLEVEL=default > ++ return 0 > ++ get_bootparam noconfigprofile > ++ local x copt params retval=1 > ++ [[ ! -r /proc/cmdline ]] > < /proc/cmdline > ++ for copt in '$(< /proc/cmdline)' > ++ [[ root == \g\e\n\t\o\o ]] > ++ for copt in '$(< /proc/cmdline)' > ++ [[ init == \g\e\n\t\o\o ]] > ++ for copt in '$(< /proc/cmdline)' > ++ [[ ramdisk == \g\e\n\t\o\o ]] > ++ for copt in '$(< /proc/cmdline)' > ++ [[ real_root == \g\e\n\t\o\o ]] > ++ for copt in '$(< /proc/cmdline)' > ++ [[ udev == \g\e\n\t\o\o ]] > ++ return 1 > ++ get_bootparam configprofile > ++ local x copt params retval=1 > ++ [[ ! -r /proc/cmdline ]] > < /proc/cmdline > ++ for copt in '$(< /proc/cmdline)' > ++ [[ root == \g\e\n\t\o\o ]] > ++ for copt in '$(< /proc/cmdline)' > ++ [[ init == \g\e\n\t\o\o ]] > ++ for copt in '$(< /proc/cmdline)' > ++ [[ ramdisk == \g\e\n\t\o\o ]] > ++ for copt in '$(< /proc/cmdline)' > ++ [[ real_root == \g\e\n\t\o\o ]] > ++ for copt in '$(< /proc/cmdline)' > ++ [[ udev == \g\e\n\t\o\o ]] > ++ return 1 > ++ [[ yes == \y\e\s ]] > ++ [[ -n default ]] > ++ [[ -d /etc/runlevels/boot.default ]] > ++ [[ -L /etc/runlevels/boot.default ]] > ++ [[ -z '' ]] > ++ [[ -f /var/lib/init.d/softlevel ]] > < "${svcdir}/softlevel" > ++ export SOFTLEVEL=default > ++ SOFTLEVEL=default > ++ return 0 > ++ [[ -n /etc/init.d/functions.sh ]] > ++ [[ /usr/bin/revdep-rebuild != \/\s\b\i\n\/\r\c ]] > ++ declare -r BOOTLEVEL DEFAULTLEVEL SOFTLEVEL > > if [[ -n ${EBUILD} && $* == *depend* ]] ; then > # We do not want stty to run during emerge depend > COLS=80 > else > # Setup COLS and ENDCOL so eend can line up the [ ok ] > COLS="${COLUMNS:-0}" # bash's internal COLUMNS variable > (( COLS == 0 )) && COLS="$(set -- `stty size 2>/dev/null` ; > echo "$2")" > (( COLS > 0 )) || (( COLS = 80 )) # width of [ ok ] == 7 > fi > ++ [[ -n '' ]] > ++ COLS=0 > ++ (( COLS == 0 )) > set -- `stty size 2>/dev/null` ; echo "$2" > stty size 2>/dev/null > ++++ stty size > +++ set -- 56 172 > +++ echo 172 > ++ COLS=172 > ++ (( COLS > 0 )) > > if [[ ${RC_ENDCOL} == "yes" ]] ; then > ENDCOL=$'\e[A\e['$(( COLS - 8 ))'C' > else > ENDCOL='' > fi > ++ [[ yes == > \y\e\s ]] > > ' > ++ ENDCOL=' > # Setup the colors so our messages all look pretty > if [[ ${RC_NOCOLOR} == "yes" ]] ; then > unset GOOD WARN BAD NORMAL HILITE BRACKET > else > GOOD=$'\e[32;01m' > WARN=$'\e[33;01m' > BAD=$'\e[31;01m' > HILITE=$'\e[36;01m' > BRACKET=$'\e[34;01m' > NORMAL=$'\e[0m' > fi > ++ [[ no == \y\e\s ]] > ++ GOOD='' > ++ WARN='' > ++ BAD='' > ++ HILITE='' > ++ BRACKET='' > ++ NORMAL='' > > > ############################################################################## > # > # > # *** END LAST CODE *** > # > # > # > # This should be the last code in here, please add all functions above!! > # > # > # > > ############################################################################## > > > # vim:ts=4 > + normalize_emerge_opts > + EMERGE_OPTIONS=(${EMERGE_OPTIONS[@]/%-p/--pretend}) > + EMERGE_OPTIONS=(${EMERGE_OPTIONS[@]/%-f/--fetchonly}) > + EMERGE_OPTIONS=(${EMERGE_OPTIONS[@]/%-f/--verbose}) > + [[ '' != *--pretend* ]] > + [[ 0 -ne 0 ]] > + setup_portage > portageq envvar PORTAGE_NICENESS > ++ portageq envvar PORTAGE_NICENESS > + local PORTAGE_NICENESS= > portageq envvar ROOT > ++ portageq envvar ROOT > + PORTAGE_ROOT=/ > + [[ -n '' ]] > + PORTAGE_ROOT=/ > + setup_search_paths_and_masks > + local configfile sdir mdir skip_me filter_SEARCH_DIRS > + einfo 'Configuring search environment for revdep-rebuild' > + einfon 'Configuring search environment for revdep-rebuild\n' > + [[ no == \y\e\s ]] > + [[ yes != \y\e\s ]] > + echo -ne ' * Configuring search environment for revdep-rebuild\n' > + LAST_E_CMD=einfon > + return 0 > + LAST_E_CMD=einfo > + return 0 > unset SEARCH_DIRS; portageq envvar SEARCH_DIRS > ++ unset SEARCH_DIRS > ++ portageq envvar SEARCH_DIRS > + SEARCH_DIRS+=' ' > unset SEARCH_DIRS_MASK; portageq envvar SEARCH_DIRS_MASK > ++ unset SEARCH_DIRS_MASK > ++ portageq envvar SEARCH_DIRS_MASK > + SEARCH_DIRS_MASK+=' ' > unset LD_LIBRARY_MASK; portageq envvar LD_LIBRARY_MASK > ++ unset LD_LIBRARY_MASK > ++ portageq envvar LD_LIBRARY_MASK > + LD_LIBRARY_MASK+=' ' > + [[ -d /etc/revdep-rebuild ]] > + for configfile in '/etc/revdep-rebuild/*' > . $configfile; echo $SEARCH_DIRS > ++ . /etc/revdep-rebuild/60-java > # The VM dynamically loads these at runtime so they will end up as missing > # but actually work just fine. See for example > # https://bugs.gentoo.org/show_bug.cgi?id=152039 > # > # This file should only have files the are used by things like swt. If > there > # are "broken" links inside the jre itself, the jre should install it's own > # control file. > > LD_LIBRARY_MASK="libjvm.so libjawt.so" > +++ LD_LIBRARY_MASK='libjvm.so libjawt.so' > ++ echo > + SEARCH_DIRS+=' ' > . $configfile; echo $SEARCH_DIRS_MASK > ++ . /etc/revdep-rebuild/60-java > # The VM dynamically loads these at runtime so they will end up as missing > # but actually work just fine. See for example > # https://bugs.gentoo.org/show_bug.cgi?id=152039 > # > # This file should only have files the are used by things like swt. If > there > # are "broken" links inside the jre itself, the jre should install it's own > # control file. > > LD_LIBRARY_MASK="libjvm.so libjawt.so" > +++ LD_LIBRARY_MASK='libjvm.so libjawt.so' > ++ echo > + SEARCH_DIRS_MASK+=' ' > . $configfile; echo $LD_LIBRARY_MASK > ++ . /etc/revdep-rebuild/60-java > # The VM dynamically loads these at runtime so they will end up as missing > # but actually work just fine. See for example > # https://bugs.gentoo.org/show_bug.cgi?id=152039 > # > # This file should only have files the are used by things like swt. If > there > # are "broken" links inside the jre itself, the jre should install it's own > # control file. > > LD_LIBRARY_MASK="libjvm.so libjawt.so" > +++ LD_LIBRARY_MASK='libjvm.so libjawt.so' > ++ echo libjvm.so libjawt.so > + LD_LIBRARY_MASK+=' libjvm.so libjawt.so' > + for configfile in '/etc/revdep-rebuild/*' > . $configfile; echo $SEARCH_DIRS > ++ . /etc/revdep-rebuild/61-sun-jdk-1.6 > SEARCH_DIRS_MASK="/opt/sun-jdk-1.6.0.07" > +++ SEARCH_DIRS_MASK=/opt/sun-jdk-1.6.0.07 > ++ echo > + SEARCH_DIRS+=' ' > . $configfile; echo $SEARCH_DIRS_MASK > ++ . /etc/revdep-rebuild/61-sun-jdk-1.6 > SEARCH_DIRS_MASK="/opt/sun-jdk-1.6.0.07" > +++ SEARCH_DIRS_MASK=/opt/sun-jdk-1.6.0.07 > ++ echo /opt/sun-jdk-1.6.0.07 > + SEARCH_DIRS_MASK+=' /opt/sun-jdk-1.6.0.07' > . $configfile; echo $LD_LIBRARY_MASK > ++ . /etc/revdep-rebuild/61-sun-jdk-1.6 > SEARCH_DIRS_MASK="/opt/sun-jdk-1.6.0.07" > +++ SEARCH_DIRS_MASK=/opt/sun-jdk-1.6.0.07 > ++ echo libjvm.so libjawt.so > + LD_LIBRARY_MASK+=' libjvm.so libjawt.so' > + for configfile in '/etc/revdep-rebuild/*' > . $configfile; echo $SEARCH_DIRS > ++ . /etc/revdep-rebuild/99revdep-rebuild > # Default revdep-rebuild configuration file > # > # revdep-rebuild no longer uses hardcoded paths. To change the default > # behavior the following variables can be changed: > # > # LD_LIBRARY_MASK - Mask of specially evaluated libraries > # > # SEARCH_DIRS - List of directories to search for executables and libraries > # Use this for directories that are not included in PATH or > ld.so.conf. > # An application should normally not have to set this variable > # > # SEARCH_DIRS_MASK - List of directories to not search > # Use this for directories that should not be searched by > revdep-rebuild > # This is normally used by binary packages such as openoffice-bin > # > # Note: This file is sourced using bash by the revdep-rebuild script > > LD_LIBRARY_MASK="libodbcinst.so libodbc.so libjava.so libjvm.so" > +++ LD_LIBRARY_MASK='libodbcinst.so libodbc.so libjava.so libjvm.so' > SEARCH_DIRS="/bin /sbin /usr/bin /usr/sbin /lib* /usr/lib*" > +++ SEARCH_DIRS='/bin /sbin /usr/bin /usr/sbin /lib* /usr/lib*' > SEARCH_DIRS_MASK="/lib*/modules" > +++ SEARCH_DIRS_MASK='/lib*/modules' > > ++ > echo /bin /sbin /usr/bin /usr/sbin /lib /lib32 /lib64 /usr/lib /usr/lib32 > /usr/lib64 /usr/libexec > + > SEARCH_DIRS+=' /bin /sbin /usr/bin /usr/sbin /lib /lib32 /lib64 /usr/lib > /usr/lib32 /usr/lib64 /usr/libexec' > . $configfile; echo $SEARCH_DIRS_MASK > ++ . /etc/revdep-rebuild/99revdep-rebuild > # Default revdep-rebuild configuration file > # > # revdep-rebuild no longer uses hardcoded paths. To change the default > # behavior the following variables can be changed: > # > # LD_LIBRARY_MASK - Mask of specially evaluated libraries > # > # SEARCH_DIRS - List of directories to search for executables and libraries > # Use this for directories that are not included in PATH or > ld.so.conf. > # An application should normally not have to set this variable > # > # SEARCH_DIRS_MASK - List of directories to not search > # Use this for directories that should not be searched by > revdep-rebuild > # This is normally used by binary packages such as openoffice-bin > # > # Note: This file is sourced using bash by the revdep-rebuild script > > LD_LIBRARY_MASK="libodbcinst.so libodbc.so libjava.so libjvm.so" > +++ LD_LIBRARY_MASK='libodbcinst.so libodbc.so libjava.so libjvm.so' > SEARCH_DIRS="/bin /sbin /usr/bin /usr/sbin /lib* /usr/lib*" > +++ SEARCH_DIRS='/bin /sbin /usr/bin /usr/sbin /lib* /usr/lib*' > SEARCH_DIRS_MASK="/lib*/modules" > +++ SEARCH_DIRS_MASK='/lib*/modules' > > ++ echo /lib64/modules /lib/modules > + SEARCH_DIRS_MASK+=' /lib64/modules /lib/modules' > . $configfile; echo $LD_LIBRARY_MASK > ++ . /etc/revdep-rebuild/99revdep-rebuild > # Default revdep-rebuild configuration file > # > # revdep-rebuild no longer uses hardcoded paths. To change the default > # behavior the following variables can be changed: > # > # LD_LIBRARY_MASK - Mask of specially evaluated libraries > # > # SEARCH_DIRS - List of directories to search for executables and libraries > # Use this for directories that are not included in PATH or > ld.so.conf. > # An application should normally not have to set this variable > # > # SEARCH_DIRS_MASK - List of directories to not search > # Use this for directories that should not be searched by > revdep-rebuild > # This is normally used by binary packages such as openoffice-bin > # > # Note: This file is sourced using bash by the revdep-rebuild script > > LD_LIBRARY_MASK="libodbcinst.so libodbc.so libjava.so libjvm.so" > +++ LD_LIBRARY_MASK='libodbcinst.so libodbc.so libjava.so libjvm.so' > SEARCH_DIRS="/bin /sbin /usr/bin /usr/sbin /lib* /usr/lib*" > +++ SEARCH_DIRS='/bin /sbin /usr/bin /usr/sbin /lib* /usr/lib*' > SEARCH_DIRS_MASK="/lib*/modules" > +++ SEARCH_DIRS_MASK='/lib*/modules' > > ++ echo libodbcinst.so libodbc.so libjava.so libjvm.so > + LD_LIBRARY_MASK+=' libodbcinst.so libodbc.so libjava.so libjvm.so' > + [[ -r /etc/profile.env ]] > + [[ -s /etc/profile.env ]] > . /etc/profile.env; /usr/bin/tr ':' ' ' <<< "$ROOTPATH $PATH" > ++ . /etc/profile.env > # THIS FILE IS AUTOMATICALLY GENERATED BY env-update. > # DO NOT EDIT THIS FILE. CHANGES TO STARTUP PROFILES > # GO INTO /etc/profile NOT /etc/profile.env > > export CLASSPATH='.' > +++ export CLASSPATH=. > +++ CLASSPATH=. > export CONFIG_PROTECT='/var/bind' > +++ export CONFIG_PROTECT=/var/bind > +++ CONFIG_PROTECT=/var/bind > export > CONFIG_PROTECT_MASK='/etc/env.d/java/ /etc/php/cli-php5/ext-active/ > /etc/php/cgi-php5/ext-active/ /etc/php/apache2-php5/ext-active/ > /etc/udev/rules.d /etc/terminfo /etc/ca-certificates.conf > /etc/revdep-rebuild' > +++ > export 'CONFIG_PROTECT_MASK=/etc/env.d/java/ /etc/php/cli-php5/ext-active/ > /etc/php/cgi-php5/ext-active/ /etc/php/apache2-php5/ext-active/ > /etc/udev/rules.d /etc/terminfo /etc/ca-certificates.conf > /etc/revdep-rebuild' > +++ > CONFIG_PROTECT_MASK='/etc/env.d/java/ /etc/php/cli-php5/ext-active/ > /etc/php/cgi-php5/ext-active/ /etc/php/apache2-php5/ext-active/ > /etc/udev/rules.d /etc/terminfo /etc/ca-certificates.conf > /etc/revdep-rebuild' > export CVS_RSH='ssh' > +++ export CVS_RSH=ssh > +++ CVS_RSH=ssh > export GCC_SPECS='' > +++ export GCC_SPECS= > +++ GCC_SPECS= > export > > INFOPATH='/usr/share/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.18/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.1.2/info' > +++ export > > INFOPATH=/usr/share/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.18/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.1.2/info > +++ > > INFOPATH=/usr/share/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.18/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.1.2/info > export LANG='hu_HU.UTF-8' > +++ export LANG=hu_HU.UTF-8 > +++ LANG=hu_HU.UTF-8 > export LANGUAGE='hu_HU.UTF-8:hu' > +++ export LANGUAGE=hu_HU.UTF-8:hu > +++ LANGUAGE=hu_HU.UTF-8:hu > export LC_ADDRESS='hu_HU.UTF-8' > +++ export LC_ADDRESS=hu_HU.UTF-8 > +++ LC_ADDRESS=hu_HU.UTF-8 > export LC_ALL='hu_HU.UTF-8' > +++ export LC_ALL=hu_HU.UTF-8 > +++ LC_ALL=hu_HU.UTF-8 > export LC_COLLATE='hu_HU.UTF-8' > +++ export LC_COLLATE=hu_HU.UTF-8 > +++ LC_COLLATE=hu_HU.UTF-8 > export LC_CTYPE='hu_HU.UTF-8' > +++ export LC_CTYPE=hu_HU.UTF-8 > +++ LC_CTYPE=hu_HU.UTF-8 > export LC_IDENTIFICATION='hu_HU.UTF-8' > +++ export LC_IDENTIFICATION=hu_HU.UTF-8 > +++ LC_IDENTIFICATION=hu_HU.UTF-8 > export LC_MEASUREMENT='hu_HU.UTF-8' > +++ export LC_MEASUREMENT=hu_HU.UTF-8 > +++ LC_MEASUREMENT=hu_HU.UTF-8 > export LC_MESSAGES='hu_HU.UTF-8' > +++ export LC_MESSAGES=hu_HU.UTF-8 > +++ LC_MESSAGES=hu_HU.UTF-8 > export LC_MONETARY='hu_HU.UTF-8' > +++ export LC_MONETARY=hu_HU.UTF-8 > +++ LC_MONETARY=hu_HU.UTF-8 > export LC_NAME='hu_HU.UTF-8' > +++ export LC_NAME=hu_HU.UTF-8 > +++ LC_NAME=hu_HU.UTF-8 > export LC_NUMERIC='hu_HU.UTF-8' > +++ export LC_NUMERIC=hu_HU.UTF-8 > +++ LC_NUMERIC=hu_HU.UTF-8 > export LC_PAPER='hu_HU.UTF-8' > +++ export LC_PAPER=hu_HU.UTF-8 > +++ LC_PAPER=hu_HU.UTF-8 > export LC_TELEPHONE='hu_HU.UTF-8' > +++ export LC_TELEPHONE=hu_HU.UTF-8 > +++ LC_TELEPHONE=hu_HU.UTF-8 > export LC_TIME='hu_HU.UTF-8' > +++ export LC_TIME=hu_HU.UTF-8 > +++ LC_TIME=hu_HU.UTF-8 > export LESS='-R -M --shift 5' > +++ export 'LESS=-R -M --shift 5' > +++ LESS='-R -M --shift 5' > export LESSOPEN='|lesspipe.sh %s' > +++ export 'LESSOPEN=|lesspipe.sh %s' > +++ LESSOPEN='|lesspipe.sh %s' > export > > MANPATH='/usr/local/share/man:/usr/share/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.18/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.1.2/man:/etc/java-config/system-vm/man/:/usr/lib64/php5/man/' > +++ export > > MANPATH=/usr/local/share/man:/usr/share/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.18/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.1.2/man:/etc/java-config/system-vm/man/:/usr/lib64/php5/man/ > +++ > > MANPATH=/usr/local/share/man:/usr/share/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.18/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.1.2/man:/etc/java-config/system-vm/man/:/usr/lib64/php5/man/ > export PAGER='/usr/bin/less' > +++ export PAGER=/usr/bin/less > +++ PAGER=/usr/bin/less > export > PATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2:/usr/games/bin' > +++ export > PATH=/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2:/usr/games/bin > +++ PATH=/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2:/usr/games/bin > export PYTHONPATH='/usr/lib64/portage/pym' > +++ export PYTHONPATH=/usr/lib64/portage/pym > +++ PYTHONPATH=/usr/lib64/portage/pym > export ROOTPATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2' > +++ export ROOTPATH=/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2 > +++ ROOTPATH=/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2 > ++ /usr/bin/tr : ' ' > + > SEARCH_DIRS+=' /opt/bin /usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2 /opt/bin > /usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2 /usr/games/bin' > + [[ -r /etc/ld.so.conf ]] > + [[ -s /etc/ld.so.conf ]] > sed '/^#/d;s/#.*$//' /etc/ld.so.conf > ++ sed '/^#/d;s/#.*$//' /etc/ld.so.conf > + SEARCH_DIRS+=' /usr/local/lib > /lib > /usr/lib > /lib64 > /usr/lib64 > /usr/local/lib64 > /lib32 > /usr/lib32 > /usr/local/lib32 > /usr/x86_64-pc-linux-gnu/lib > /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2 > /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/32 > /usr/games/lib > /usr/games/lib32 > /usr/lib64/libstdc++-v3/' > clean_var <<< "$SEARCH_DIRS" > ++ clean_var > ++ awk 'BEGIN {RS="[[:space:]]"} > /-\*/ {exit} > /[^[:space:]]/ {gsub(/\/\/+/, "/"); print}' > ++ sort -u > + SEARCH_DIRS='/bin > /lib > /lib32 > /lib64 > /opt/bin > /sbin > /usr/bin > /usr/games/bin > /usr/games/lib > /usr/games/lib32 > /usr/lib > /usr/lib32 > /usr/lib64 > /usr/lib64/libstdc++-v3/ > /usr/libexec > /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2 > /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/32 > /usr/local/lib > /usr/local/lib32 > /usr/local/lib64 > /usr/sbin > /usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2 > /usr/x86_64-pc-linux-gnu/lib' > clean_var <<< "$SEARCH_DIRS_MASK" > ++ clean_var > ++ awk 'BEGIN {RS="[[:space:]]"} > /-\*/ {exit} > /[^[:space:]]/ {gsub(/\/\/+/, "/"); print}' > ++ sort -u > + SEARCH_DIRS_MASK='/lib64/modules > /lib/modules > /opt/sun-jdk-1.6.0.07' > clean_var <<< "$LD_LIBRARY_MASK" > ++ clean_var > ++ awk 'BEGIN {RS="[[:space:]]"} > /-\*/ {exit} > /[^[:space:]]/ {gsub(/\/\/+/, "/"); print}' > ++ sort -u > + LD_LIBRARY_MASK='libjava.so > libjawt.so > libjvm.so > libodbcinst.so > libodbc.so' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /bin == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /bin == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /bin == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /bin' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /lib == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /lib == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /lib == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /lib' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /lib32 == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /lib32 == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /lib32 == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /lib32' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /lib64 == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /lib64 == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /lib64 == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /lib64' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /opt/bin == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /opt/bin == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /opt/bin == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /opt/bin' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /sbin == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /sbin == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /sbin == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /sbin' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/bin == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/bin == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/bin == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /usr/bin' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/games/bin == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/games/bin == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/games/bin == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /usr/games/bin' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/games/lib == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/games/lib == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/games/lib == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /usr/games/lib' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/games/lib32 == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/games/lib32 == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/games/lib32 == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /usr/games/lib32' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/lib == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/lib == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/lib == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /usr/lib' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/lib32 == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/lib32 == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/lib32 == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /usr/lib32' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/lib64 == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/lib64 == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/lib64 == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /usr/lib64' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/lib64/libstdc++-v3/ == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/lib64/libstdc++-v3/ == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/lib64/libstdc++-v3/ == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /usr/lib64/libstdc++-v3/' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/libexec == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/libexec == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/libexec == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /usr/libexec' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2 == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2 == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2 == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/32 == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/32 == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/32 == /opt/sun-jdk-1.6.0.07/* > ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/32' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/local/lib == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/local/lib == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/local/lib == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /usr/local/lib' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/local/lib32 == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/local/lib32 == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/local/lib32 == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /usr/local/lib32' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/local/lib64 == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/local/lib64 == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/local/lib64 == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /usr/local/lib64' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/sbin == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/sbin == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/sbin == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /usr/sbin' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2 == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2 == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2 == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2' > + for sdir in '${SEARCH_DIRS}' > + skip_me= > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/x86_64-pc-linux-gnu/lib == /lib64/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/x86_64-pc-linux-gnu/lib == /lib/modules/* ]] > + for mdir in '${SEARCH_DIRS_MASK}' > + [[ /usr/x86_64-pc-linux-gnu/lib == /opt/sun-jdk-1.6.0.07/* ]] > + [[ -n '' ]] > + filter_SEARCH_DIRS+=' /usr/x86_64-pc-linux-gnu/lib' > clean_var <<< "${filter_SEARCH_DIRS}" > ++ clean_var > ++ awk 'BEGIN {RS="[[:space:]]"} > /-\*/ {exit} > /[^[:space:]]/ {gsub(/\/\/+/, "/"); print}' > ++ sort -u > + SEARCH_DIRS='/bin > /lib > /lib32 > /lib64 > /opt/bin > /sbin > /usr/bin > /usr/games/bin > /usr/games/lib > /usr/games/lib32 > /usr/lib > /usr/lib32 > /usr/lib64 > /usr/lib64/libstdc++-v3/ > /usr/libexec > /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2 > /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/32 > /usr/local/lib > /usr/local/lib32 > /usr/local/lib64 > /usr/sbin > /usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2 > /usr/x86_64-pc-linux-gnu/lib' > + [[ -n /bin > /lib > /lib32 > /lib64 > /opt/bin > /sbin > /usr/bin > /usr/games/bin > /usr/games/lib > /usr/games/lib32 > /usr/lib > /usr/lib32 > /usr/lib64 > /usr/lib64/libstdc++-v3/ > /usr/libexec > /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2 > /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/32 > /usr/local/lib > /usr/local/lib32 > /usr/local/lib64 > /usr/sbin > /usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2 > /usr/x86_64-pc-linux-gnu/lib ]] > + get_search_env > + local new_env > + local old_env > python -c 'import os; import pwd; print pwd.getpwuid(os.getuid())[0]' > ++ python -c 'import os; import pwd; print pwd.getpwuid(os.getuid())[0]' > + local uid=root > + [[ root == \r\o\o\t ]] > + local tmp_target=/var/cache/revdep-rebuild > + verify_tmpdir /var/cache/revdep-rebuild root > + umask 007 > + [[ ! -n /var/cache/revdep-rebuild ]] > + [[ -d /var/cache/revdep-rebuild ]] > find "$1" -type d ! \( -user $2 -perm -0700 \) > ++ find /var/cache/revdep-rebuild -type d '!' '(' -user root -perm -0700 > ')' > ++ hash find > type -P find > +++ type -P find > ++ local testsubject=/usr/bin/find > command find "$testsubject" -executable 2> /dev/null > +++ command find /usr/bin/find -executable > ++ [[ -n /usr/bin/find ]] > ++ unset -f find > ++ find /var/cache/revdep-rebuild -type d '!' '(' -user root -perm -0700 > ')' > + [[ -n '' ]] > + cd /var/cache/revdep-rebuild > + builtin cd -P /var/cache/revdep-rebuild > + [[ /var/cache/revdep-rebuild != /var/mnt/cache/revdep-rebuild ]] > + die 1 'Working directory expected to be /var/cache/revdep-rebuild, but it > is /var/mnt/cache/revdep-rebuild' > + local status=1 > + shift > + eerror 'Working directory expected to be /var/cache/revdep-rebuild, but > it > is /var/mnt/cache/revdep-rebuild' > + [[ no == \y\e\s ]] > + [[ yes != \y\e\s ]] > + echo -e ' * Working directory expected to be /var/cache/revdep-rebuild, > but > it is /var/mnt/cache/revdep-rebuild' > + local name=rc-scripts > + [[ /usr/bin/revdep-rebuild != \/\s\b\i\n\/\r\u\n\s\c\r\i\p\t\.\s\h ]] > + name=revdep-rebuild > + esyslog daemon.err rc-scripts 'Working directory expected to > be /var/cache/revdep-rebuild, but it is /var/mnt/cache/revdep-rebuild' > + local pri= > + local tag= > + [[ -x /usr/bin/logger ]] > + pri=daemon.err > + tag=rc-scripts > + shift 2 > + [[ -z Working directory expected to be /var/cache/revdep-rebuild, but it > is /var/mnt/cache/revdep-rebuild ]] > + /usr/bin/logger -p daemon.err -t rc-scripts -- 'Working directory > expected > to be /var/cache/revdep-rebuild, but it is /var/mnt/cache/revdep-rebuild' > + return 0 > + LAST_E_CMD=eerror > + return 0 > + exit 1 > > > >