Re: revdep-rebuild
cjvt <[email protected]>
| Newsgroups | gmane.linux.gentoo.user.hungarian |
|---|---|
| Message-ID | <[email protected]> |
2008. október 6. dátummal George Hron ezt írta: > Hat nem tudom, ez igy nem tunik a legjobb otletnek. Valoszinu, hogy > kiolvassa a symlinket. Szerintem a /var/cache -t szedd le a /var/mnt alol. > Masik lehetoseg a /var/mnt helyett a /var-ba mountolni, a szerverek cuccait > meg szepen eltenni onnan, mondjuk a /srv konyvtarba (en ezt szoktam eleve > csinalni). Igen, ez eddig vilagos, csak ez esetben az erdekelne, hogy vajon miert is dontott igy barmely fejleszto (merthogy az elmult par ev gentoolkitjei bekeben megfertek ezzel a megoldassal). Tovabba, ennyi erovel akar legkozelebb az lehet a problemaja, hogy teszem azt a /var vagy /var/cache nem a /-al azonos particion helyezkedik el, tagabb ertelemben pedig barmi mas is lehet kotozkodni valoja (mondjuk tul nagy a particio, vagy raid-ban van, vagy akarmi), hiszen miert is ne? Olyba tunik nekem a debug kimenetbol, hogy local uid=root + [[ root == \r\o\o\t ]] + local tmp_target=/var/cache/revdep-rebuild + verify_tmpdir /var/cache/revdep-rebuild root + umask 007 a tmp_target nevu, userhez kotott kornyezeti valtozot olvassa ki valahonnan (mar ti. feltetelezve, hogy igazam van). Ezt vajon felul tudnam biralni a bash env-ben, vagy barhol mashol? vagy proba-cseresznye? :) vt > > 2008/10/4 cjvt <[email protected]> > > > Üdv, > > > > elöljáróban: > > > > az érintett rendszeren a következő symlinkek léteznek (mármint adekvát) a > > /var > > könyvtár alatt: > > > > lrwxrwxrwx 1 amavis amavis 15 jún 11 14.26 amavis -> /var/mnt/amavis > > lrwxrwxrwx 1 root root 14 jún 11 14.26 cache -> /var/mnt/cache > > lrwxrwxrwx 1 root root 12 jún 11 14.26 tmp -> /var/mnt/tmp > > > > A /var/mnt tartalma > > > > # ls -la /var/mnt/ > > összesen 20 > > drwxr-xr-x 5 root root 4096 jún 11 14.32 . > > drwxr-xr-x 14 root root 4096 jún 11 14.26 .. > > drwxr-xr-x 8 amavis amavis 4096 szept 28 15.34 amavis > > drwxr-xr-x 9 root root 4096 okt 4 09.56 cache > > drwxrwxrwt 8 root root 4096 okt 4 10.27 tmp > > > > A /var könyvtár a /-el megegyező, a /var/mnt egy másik partíció. > > > > Ezzel eleddig semmiféle probléma nem akadt. > > > > A mai napom azonban frissítettem > > > > app-portage/gentoolkit-0.2.4.2 -re > > > > azota a revdep-rebuild a következő hibát dobja: > > > > # revdep-rebuild > > * Configuring search environment for revdep-rebuild > > * Working directory expected to be /var/cache/revdep-rebuild, but it > > is /var/mnt/cache/revdep-rebuild > > > > Van vkinek ötlete, hogy miért, és hogyan is lehetne lebeszélni a > > hibaüzenetről? > > > > > > vt > > > > > > a revdep-rebuild -d kimenete (a közvetlenül erintett rész a legvégén): > > > > + getopts :CdehikL:loPpqu:vX OPT > > + unset args > > + [[ -n '' ]] > > + setup_color > > portageq envvar NOCOLOR > > ++ portageq envvar NOCOLOR > > + export NOCOLOR= > > + NOCOLOR= > > + [[ '' = yes ]] > > + [[ '' = true ]] > > + . /etc/init.d/functions.sh > > # Copyright 1999-2007 Gentoo Foundation > > # Distributed under the terms of the GNU General Public License v2 > > > > RC_GOT_FUNCTIONS="yes" > > ++ RC_GOT_FUNCTIONS=yes > > > > # Override defaults with user settings ... > > [[ -f /etc/conf.d/rc ]] && source /etc/conf.d/rc > > ++ [[ -f /etc/conf.d/rc ]] > > ++ source /etc/conf.d/rc > > # /etc/conf.d/rc: Global config file for the Gentoo RC System > > > > # This is the number of tty's used in most of the rc-scripts (like > > # consolefont, numlock, etc ...) > > > > RC_TTY_NUMBER=11 > > +++ RC_TTY_NUMBER=11 > > > > # Set to "yes" if you want the rc system to try and start services > > # in parallel for a slight speed improvement. NOTE: When > > RC_PARALLEL_STARTUP > > # is enabled, init script output is replaced with simple "service foo > > # starting/stopping" messages so that output is not mixed up. > > # You can stop this from happening on the command line by passing > > --verbose # to the init script or by setting RC_VERBOSE="yes" below. > > > > RC_PARALLEL_STARTUP="no" > > +++ RC_PARALLEL_STARTUP=no > > > > # Set RC_INTERACTIVE to "yes" and you'll be able to press the I key > > during # boot so you can choose to start specific services. Set to "no" > > to disable # this feature. > > > > RC_INTERACTIVE="yes" > > +++ RC_INTERACTIVE=yes > > > > # Do we allow services to be hotplugged? If not, set to RC_HOTPLUG="no" > > # NOTE: This does not affect anything hotplug/udev related, just the > > # starting/stopping of the init.d service triggered by hotplug. > > > > RC_HOTPLUG="yes" > > +++ RC_HOTPLUG=yes > > > > # Dynamic /dev managers can trigger coldplug events which cause services > > to # start before we are ready for them. If this happens, we can defer > > these # services to start in the boot runlevel. Set RC_COLDPLUG="no" if > > you don't # want this. > > # NOTE: This also affects module coldplugging in udev-096 and higher > > # If you want module coldplugging but not coldplugging of services then > > you # can set RC_COLDPLUG="yes" and RC_PLUG_SERVICES="!*" > > > > RC_COLDPLUG="yes" > > +++ RC_COLDPLUG=yes > > > > # Some people want a finer grain over hotplug/coldplug. RC_PLUG_SERVICES > > is a > > # list of services that are matched in order, either allowing or not. By > > # default we allow services through as RC_COLDPLUG/RC_HOTPLUG has to be > > yes # anyway. > > # Example - RC_PLUG_SERVICES="net.wlan !net.*" > > # This allows net.wlan and any service not matching net.* to be plugged. > > > > RC_PLUG_SERVICES="" > > +++ RC_PLUG_SERVICES= > > > > # RC_NET_STRICT_CHECKING allows some flexibility with the 'net' service. > > # The following values are allowed: > > # none - The 'net' service is always considered up. > > # no - This basically means that at least one net.* service besides > > net.lo > > # must be up. This can be used by notebook users that have a > > wifi and > > # a static nic, and only wants one up at any given time to have > > the > > # 'net' service seen as up. > > # lo - This is the same as the 'no' option, but net.lo is also > > counted. # This should be useful to people that do not care > > about any specific > > # interface being up at boot. > > # yes - For this ALL network interfaces MUST be up for the 'net' > > service to > > # be considered up. > > > > RC_NET_STRICT_CHECKING="no" > > +++ RC_NET_STRICT_CHECKING=no > > > > # RC_DOWN_INTERFACE allows you to specify if RC will bring the interface > > # completely down when it stops. The default is yes, but there are some > > # instances where you may not want this to happen such as using Wake On > > LAN. > > > > RC_DOWN_INTERFACE="yes" > > +++ RC_DOWN_INTERFACE=yes > > > > # RC_VOLUME_ORDER allows you to specify, or even remove the volume setup > > # for various volume managers (MD, EVMS2, LVM, DM, etc). Note that they > > are > > # stopped in reverse order. > > > > RC_VOLUME_ORDER="raid evms lvm dm" > > +++ RC_VOLUME_ORDER='raid evms lvm dm' > > > > # RC_VERBOSE will make init scripts more verbose. Only networking scripts > > # really use this at this time, and this is useful for trouble shooting > > # any issues you may have. > > # This is also used to re-enable init script output for init scripts > > # started or stopped from the command line. > > > > RC_VERBOSE="no" > > +++ RC_VERBOSE=no > > > > # RC_BOOTLOG will generate a log of the boot messages shown on the > > console. # Useful for headless machines or debugging. You need to emerge > > the # app-admin/showconsole package for this to work. Note that this > > probably # won't work correctly with boot splash. > > > > RC_BOOTLOG="no" > > +++ RC_BOOTLOG=no > > > > # Set to "yes" if you want to benchmark system boot with bootchart. > > # You'll need to emerge the app-benchmarks/bootchart package for this to > > work. > > > > RC_BOOTCHART="no" > > +++ RC_BOOTCHART=no > > > > # RC_USE_FSTAB allows you to override the default mount options for the > > # standard /proc, /sys, /dev, and /dev/pts mount points. Note that this > > # is the new way for selecting ramfs/tmpfs/etc... for udev mounting. > > > > RC_USE_FSTAB="no" > > +++ RC_USE_FSTAB=no > > > > # RC_USE_CONFIG_PROFILE allows you to have different /etc/conf.d files > > # based on your runlevel - if a conf.d file for your profile does not > > exist # then we try and use the default one. > > # To enable runlevel selection at boot, append "softlevel=foobar" to your > > # kernel line to change to the foobar runlevel. Here we would search for > > # /etc/conf.d/<service>.foobar config files before trying to use the > > default > > # /etc/conf.d/<service>. > > # Note that it is only active if 'softlevel' was specified via the kernel > > line, > > # and it is intended to use for different grub/lilo entries to specify > > config > > # changes for say laptops between home and work, where you would have > > setup # 'work' and 'home' runlevels, with /etc/conf.d/*.<runlevel> as > > needed. > > > > RC_USE_CONFIG_PROFILE="yes" > > +++ RC_USE_CONFIG_PROFILE=yes > > > > # RC_FORCE_AUTO tries its best to prevent user interaction during the > > boot and > > # shutdown process. For example, fsck will automatically be run or > > volumes # remounted to create proper directory trees. This feature can > > be dangerous > > # and is meant ONLY for headless machines where getting a physical > > console # hooked up is a huge pita. > > > > RC_FORCE_AUTO="no" > > +++ RC_FORCE_AUTO=no > > > > # Use this variable to control the /dev management behavior. > > # auto - let the scripts figure out what's best at boot > > # devfs - use devfs (requires sys-fs/devfsd) > > # udev - use udev (requires sys-fs/udev) > > # static - let the user manage /dev (YOU need to create ALL device > > nodes) > > > > RC_DEVICES="auto" > > +++ RC_DEVICES=auto > > > > # UDEV OPTION: > > # Set to "yes" if you want to save /dev to a tarball on shutdown > > # and restore it on startup. This is useful if you have a lot of > > # custom device nodes that udev does not handle/know about. > > > > RC_DEVICE_TARBALL="no" > > +++ RC_DEVICE_TARBALL=no > > > > # RC_DMESG_LEVEL sets the level at which logging of messages is done to > > the # console. See dmesg(8) for more info. > > > > RC_DMESG_LEVEL="1" > > +++ RC_DMESG_LEVEL=1 > > > > > > > > > > > > # > > # Controlling start-stop-daemon behavior > > > > # Set to "yes" if start-stop-daemon should always retry killing the > > # service with sig KILL if it fails the first time. > > > > RC_RETRY_KILL="yes" > > +++ RC_RETRY_KILL=yes > > > > > > # Set the amount of seconds start-stop-daemon should wait between > > # retries. > > > > RC_RETRY_TIMEOUT=1 > > +++ RC_RETRY_TIMEOUT=1 > > > > > > # Set the amount of times start-stop-daemon should try to kill > > # a service before giving up. > > > > RC_RETRY_COUNT=5 > > +++ RC_RETRY_COUNT=5 > > > > > > # Set to "yes" if start-stop-daemon should fail if the service > > # is marked as started, but not actually running on stop. > > > > RC_FAIL_ON_ZOMBIE="no" > > +++ RC_FAIL_ON_ZOMBIE=no > > > > > > # Set to "yes" if start-stop-daemon should attempt to kill > > # any children left in the system. > > # Be careful with this as it really does what it was on the tin. > > # fex, if you're in an ssh process and you restart a service on which ssh > > # depends then your terminal will be killed also. > > > > RC_KILL_CHILDREN="no" > > +++ RC_KILL_CHILDREN=no > > > > > > # Set the amount of seconds start-stop-daemon waits after starting > > # the daemon to check it is still running. If it's not then we > > # try and stop any children if possible. > > RC_WAIT_ON_START="0.1" > > +++ RC_WAIT_ON_START=0.1 > > > > > > > > ######################################################################### > >##### # SERVICE CONFIGURATION VARIABLES > > # These variables are documented here, but should be configured in > > # /etc/conf.d/foo for service foo and NOT enabled here unless you > > # really want them to work on a global basis. > > > > # Some daemons are started and stopped via start-stop-daemon. > > # We can launch them through other daemons here, for example valgrind. > > # This is only useful for serious debugging of the daemon > > # WARNING: If the script's "stop" function does not supply a PID file > > then # all processes using the same daemon will be killed. > > #RC_DAEMON="/usr/bin/valgrind --tool=memcheck > > --log-file=/tmp/valgrind.syslog-ng" > > > > # strace needs to be prefixed with --background as it does not detach > > when # it's following > > #RC_DAEMON="--background /usr/sbin/strace -f -o /tmp/strace.syslog-ng" > > > > # Pass ulimit parameters > > #RC_ULIMIT="-u 30" > > > > > > ######################################################################### > >##### > > > > > > # > > # Internal configuration variables > > # > > # NB: These are for advanced users, and you should really > > # know what you are doing before changing them! > > # > > > > # rc-scripts dep-cache directory > > # > > # NOTE: Do not remove the next line, as its needed by the baselayout > > ebuild! > > # > > # svcdir="/var/lib/init.d" > > > > svcdir="/var/lib/init.d" > > +++ svcdir=/var/lib/init.d > > > > # Should we mount $svcdir in a ram disk for some speed increase > > # for slower machines, or for the more extreme setups ? > > > > svcmount="no" > > +++ svcmount=no > > > > # FS type that should be used for $svcdir. Note that you need > > # $svcmount above set to "yes" for this to work ... Currently > > # tmpfs, ramfs, and ramdisk are supported (tmpfs is the default). > > > > svcfstype="tmpfs" > > +++ svcfstype=tmpfs > > > > # Size of $svcdir in KB. Note that ramfs doesn't support this > > # due to kernel limitations. > > > > svcsize=2048 > > +++ svcsize=2048 > > > > # Check /etc/conf.d/rc for a description of these ... > > declare -r svclib="/lib/rcscripts" > > ++ declare -r svclib=/lib/rcscripts > > declare -r svcdir="${svcdir:-/var/lib/init.d}" > > ++ declare -r svcdir=/var/lib/init.d > > svcmount="${svcmount:-no}" > > ++ svcmount=no > > svcfstype="${svcfstype:-tmpfs}" > > ++ svcfstype=tmpfs > > svcsize="${svcsize:-1024}" > > ++ svcsize=2048 > > > > # Different types of dependencies > > deptypes="need use" > > ++ deptypes='need use' > > # Different types of order deps > > ordtypes="before after" > > ++ ordtypes='before after' > > > > # > > # Internal variables > > # > > > > # Dont output to stdout? > > RC_QUIET_STDOUT="${RC_QUIET_STDOUT:-no}" > > ++ RC_QUIET_STDOUT=no > > RC_VERBOSE="${RC_VERBOSE:-no}" > > ++ RC_VERBOSE=no > > > > # Should we use color? > > RC_NOCOLOR="${RC_NOCOLOR:-no}" > > ++ RC_NOCOLOR=no > > # Can the terminal handle endcols? > > RC_ENDCOL="yes" > > ++ RC_ENDCOL=yes > > > > # > > # Default values for rc system > > # > > RC_TTY_NUMBER="${RC_TTY_NUMBER:-11}" > > ++ RC_TTY_NUMBER=11 > > RC_PARALLEL_STARTUP="${RC_PARALLEL_STARTUP:-no}" > > ++ RC_PARALLEL_STARTUP=no > > RC_NET_STRICT_CHECKING="${RC_NET_STRICT_CHECKING:-no}" > > ++ RC_NET_STRICT_CHECKING=no > > RC_USE_FSTAB="${RC_USE_FSTAB:-no}" > > ++ RC_USE_FSTAB=no > > RC_USE_CONFIG_PROFILE="${RC_USE_CONFIG_PROFILE:-yes}" > > ++ RC_USE_CONFIG_PROFILE=yes > > RC_FORCE_AUTO="${RC_FORCE_AUTO:-no}" > > ++ RC_FORCE_AUTO=no > > RC_DEVICES="${RC_DEVICES:-auto}" > > ++ RC_DEVICES=auto > > RC_DOWN_INTERFACE="${RC_DOWN_INTERFACE:-yes}" > > ++ RC_DOWN_INTERFACE=yes > > RC_VOLUME_ORDER="${RC_VOLUME_ORDER:-raid evms lvm dm}" > > ++ RC_VOLUME_ORDER='raid evms lvm dm' > > > > # > > # Default values for e-message indentation and dots > > # > > RC_INDENTATION='' > > ++ RC_INDENTATION= > > RC_DEFAULT_INDENT=2 > > ++ RC_DEFAULT_INDENT=2 > > #RC_DOT_PATTERN=' .' > > RC_DOT_PATTERN='' > > ++ RC_DOT_PATTERN= > > > > # bool has_addon(addon) > > # > > # See if addon exists. > > # > > has_addon() { > > [[ -e ${svclib}/addons/$1 ]] > > } > > > > # void import_addon(char *addon) > > # > > # Import code from the specified addon if it exists > > # > > import_addon() { > > local addon="${svclib}/addons/$1" > > if has_addon $1 ; then > > source "${addon}" > > return 0 > > fi > > return 1 > > } > > > > # void splash(...) > > # > > # Notify bootsplash/splashutils/gensplash/whatever about > > # important events. > > # > > splash() { > > return 0 > > } > > # This will override the splash() function... > > if ! import_addon splash-functions.sh ; then > > [[ -f /sbin/splash-functions.sh ]] && source > > /sbin/splash-functions.sh > > fi > > ++ import_addon splash-functions.sh > > ++ local addon=/lib/rcscripts/addons/splash-functions.sh > > ++ has_addon splash-functions.sh > > ++ [[ -e /lib/rcscripts/addons/splash-functions.sh ]] > > ++ return 1 > > ++ [[ -f /sbin/splash-functions.sh ]] > > > > # void profiling(...) > > # > > # Notify bootsplash/whatever about important events. > > # > > profiling() { > > return 0 > > } > > import_addon profiling-functions.sh > > ++ import_addon profiling-functions.sh > > ++ local addon=/lib/rcscripts/addons/profiling-functions.sh > > ++ has_addon profiling-functions.sh > > ++ [[ -e /lib/rcscripts/addons/profiling-functions.sh ]] > > ++ return 1 > > > > # void bootlog(...) > > # > > # Notify bootlogger about important events. > > bootlog() { > > return 0 > > } > > [[ ${RC_BOOTLOG} == "yes" ]] && import_addon bootlogger.sh > > ++ [[ no == \y\e\s ]] > > > > # void get_bootconfig() > > # > > # Get the BOOTLEVEL and SOFTLEVEL by setting > > # 'bootlevel' and 'softlevel' via kernel > > # parameters. > > # > > get_bootconfig() { > > local copt= > > local newbootlevel= > > local newsoftlevel= > > > > if [[ -r /proc/cmdline ]] ; then > > for copt in $(</proc/cmdline) ; do > > case "${copt%=*}" in > > bootlevel) > > newbootlevel="${copt##*=}" > > ;; > > softlevel) > > newsoftlevel="${copt##*=}" > > ;; > > esac > > done > > fi > > > > if [[ -n ${newbootlevel} ]] ; then > > export BOOTLEVEL="${newbootlevel}" > > else > > export BOOTLEVEL="boot" > > fi > > > > if [[ -n ${newsoftlevel} ]] ; then > > export DEFAULTLEVEL="${newsoftlevel}" > > else > > export DEFAULTLEVEL="default" > > fi > > > > return 0 > > } > > > > setup_defaultlevels() { > > get_bootconfig > > > > if get_bootparam "noconfigprofile" ; then > > export RC_USE_CONFIG_PROFILE="no" > > > > elif get_bootparam "configprofile" ; then > > export RC_USE_CONFIG_PROFILE="yes" > > fi > > > > if [[ ${RC_USE_CONFIG_PROFILE} == "yes" && -n ${DEFAULTLEVEL} ]] > > && \ > > [[ -d "/etc/runlevels/${BOOTLEVEL}.${DEFAULTLEVEL}" || \ > > -L "/etc/runlevels/${BOOTLEVEL}.${DEFAULTLEVEL}" ]] ; then > > export BOOTLEVEL="${BOOTLEVEL}.${DEFAULTLEVEL}" > > fi > > > > if [[ -z ${SOFTLEVEL} ]] ; then > > if [[ -f "${svcdir}/softlevel" ]] ; then > > export SOFTLEVEL=$(< "${svcdir}/softlevel") > > else > > export SOFTLEVEL="${BOOTLEVEL}" > > fi > > fi > > > > return 0 > > } > > > > # void get_libdir(void) > > # > > # prints the current libdir {lib,lib32,lib64} > > # > > get_libdir() { > > if [[ -n ${CONF_LIBDIR_OVERRIDE} ]] ; then > > CONF_LIBDIR="${CONF_LIBDIR_OVERRIDE}" > > elif [[ -x /usr/bin/portageq ]] ; then > > CONF_LIBDIR="$(/usr/bin/portageq envvar CONF_LIBDIR)" > > fi > > echo "${CONF_LIBDIR:=lib}" > > } > > > > # void esyslog(char* priority, char* tag, char* message) > > # > > # use the system logger to log a message > > # > > esyslog() { > > local pri= > > local tag= > > > > if [[ -x /usr/bin/logger ]] ; then > > pri="$1" > > tag="$2" > > > > shift 2 > > [[ -z "$*" ]] && return 0 > > > > /usr/bin/logger -p "${pri}" -t "${tag}" -- "$*" > > fi > > > > return 0 > > } > > > > # void eindent(int num) > > # > > # increase the indent used for e-commands. > > # > > eindent() { > > local i="$1" > > (( i > 0 )) || (( i = RC_DEFAULT_INDENT )) > > esetdent $(( ${#RC_INDENTATION} + i )) > > } > > > > # void eoutdent(int num) > > # > > # decrease the indent used for e-commands. > > # > > eoutdent() { > > local i="$1" > > (( i > 0 )) || (( i = RC_DEFAULT_INDENT )) > > esetdent $(( ${#RC_INDENTATION} - i )) > > } > > > > # void esetdent(int num) > > # > > # hard set the indent used for e-commands. > > # num defaults to 0 > > # > > esetdent() { > > local i="$1" > > (( i < 0 )) && (( i = 0 )) > > RC_INDENTATION=$(printf "%${i}s" '') > > } > > > > # void einfo(char* message) > > # > > # show an informative message (with a newline) > > # > > einfo() { > > einfon "$*\n" > > LAST_E_CMD="einfo" > > return 0 > > } > > > > # void einfon(char* message) > > # > > # show an informative message (without a newline) > > # > > einfon() { > > [[ ${RC_QUIET_STDOUT} == "yes" ]] && return 0 > > [[ ${RC_ENDCOL} != "yes" && ${LAST_E_CMD} == "ebegin" ]] && echo > > echo -ne " ${GOOD}*${NORMAL} ${RC_INDENTATION}$*" > > LAST_E_CMD="einfon" > > return 0 > > } > > > > # void ewarn(char* message) > > # > > # show a warning message + log it > > # > > ewarn() { > > if [[ ${RC_QUIET_STDOUT} == "yes" ]] ; then > > echo " $*" > > else > > [[ ${RC_ENDCOL} != "yes" && ${LAST_E_CMD} == "ebegin" ]] > > && echo > > echo -e " ${WARN}*${NORMAL} ${RC_INDENTATION}$*" > > fi > > > > local name="rc-scripts" > > [[ $0 != "/sbin/runscript.sh" ]] && name="${0##*/}" > > # Log warnings to system log > > esyslog "daemon.warning" "${name}" "$*" > > > > LAST_E_CMD="ewarn" > > return 0 > > } > > > > # void eerror(char* message) > > # > > # show an error message + log it > > # > > eerror() { > > if [[ ${RC_QUIET_STDOUT} == "yes" ]] ; then > > echo " $*" >/dev/stderr > > else > > [[ ${RC_ENDCOL} != "yes" && ${LAST_E_CMD} == "ebegin" ]] > > && echo > > echo -e " ${BAD}*${NORMAL} ${RC_INDENTATION}$*" > > fi > > > > local name="rc-scripts" > > [[ $0 != "/sbin/runscript.sh" ]] && name="${0##*/}" > > # Log errors to system log > > esyslog "daemon.err" "rc-scripts" "$*" > > > > LAST_E_CMD="eerror" > > return 0 > > } > > > > # void ebegin(char* message) > > # > > # show a message indicating the start of a process > > # > > ebegin() { > > local msg="$*" dots spaces="${RC_DOT_PATTERN//?/ }" > > [[ ${RC_QUIET_STDOUT} == "yes" ]] && return 0 > > > > if [[ -n ${RC_DOT_PATTERN} ]] ; then > > dots="$(printf "%$((COLS - 3 - ${#RC_INDENTATION} - > > ${#msg} - > > 7))s" '')" > > dots="${dots//${spaces}/${RC_DOT_PATTERN}}" > > msg="${msg}${dots}" > > else > > msg="${msg} ..." > > fi > > einfon "${msg}" > > [[ ${RC_ENDCOL} == "yes" ]] && echo > > > > LAST_E_LEN="$(( 3 + ${#RC_INDENTATION} + ${#msg} ))" > > LAST_E_CMD="ebegin" > > return 0 > > } > > > > # void _eend(int error, char *efunc, char* errstr) > > # > > # indicate the completion of process, called from eend/ewend > > # if error, show errstr via efunc > > # > > # This function is private to functions.sh. Do not call it from a > > # script. > > # > > _eend() { > > local retval="${1:-0}" efunc="${2:-eerror}" msg > > shift 2 > > > > if [[ ${retval} == "0" ]] ; then > > [[ ${RC_QUIET_STDOUT} == "yes" ]] && return 0 > > msg="${BRACKET}[ ${GOOD}ok${BRACKET} ]${NORMAL}" > > else > > if [[ -c /dev/null ]] ; then > > rc_splash "stop" &>/dev/null & > > else > > rc_splash "stop" & > > fi > > if [[ -n $* ]] ; then > > ${efunc} "$*" > > fi > > msg="${BRACKET}[ ${BAD}!!${BRACKET} ]${NORMAL}" > > fi > > > > if [[ ${RC_ENDCOL} == "yes" ]] ; then > > echo -e "${ENDCOL} ${msg}" > > else > > [[ ${LAST_E_CMD} == ebegin ]] || LAST_E_LEN=0 > > printf "%$(( COLS - LAST_E_LEN - 6 ))s%b\n" '' "${msg}" > > fi > > > > return ${retval} > > } > > > > # void eend(int error, char* errstr) > > # > > # indicate the completion of process > > # if error, show errstr via eerror > > # > > eend() { > > local retval="${1:-0}" > > shift > > > > _eend "${retval}" eerror "$*" > > > > LAST_E_CMD="eend" > > return ${retval} > > } > > > > # void ewend(int error, char* errstr) > > # > > # indicate the completion of process > > # if error, show errstr via ewarn > > # > > ewend() { > > local retval="${1:-0}" > > shift > > > > _eend "${retval}" ewarn "$*" > > > > LAST_E_CMD="ewend" > > return ${retval} > > } > > > > # v-e-commands honor RC_VERBOSE which defaults to no. > > # The condition is negated so the return value will be zero. > > veinfo() { [[ ${RC_VERBOSE} != "yes" ]] || einfo "$@"; } > > veinfon() { [[ ${RC_VERBOSE} != "yes" ]] || einfon "$@"; } > > vewarn() { [[ ${RC_VERBOSE} != "yes" ]] || ewarn "$@"; } > > veerror() { [[ ${RC_VERBOSE} != "yes" ]] || eerror "$@"; } > > vebegin() { [[ ${RC_VERBOSE} != "yes" ]] || ebegin "$@"; } > > veend() { > > [[ ${RC_VERBOSE} == "yes" ]] && { eend "$@"; return $?; } > > return ${1:-0} > > } > > vewend() { > > [[ ${RC_VERBOSE} == "yes" ]] && { ewend "$@"; return $?; } > > return ${1:-0} > > } > > > > # char *KV_major(string) > > # > > # Return the Major (X of X.Y.Z) kernel version > > # > > KV_major() { > > [[ -z $1 ]] && return 1 > > > > local KV="$@" > > echo "${KV%%.*}" > > } > > > > # char *KV_minor(string) > > # > > # Return the Minor (Y of X.Y.Z) kernel version > > # > > KV_minor() { > > [[ -z $1 ]] && return 1 > > > > local KV="$@" > > KV="${KV#*.}" > > echo "${KV%%.*}" > > } > > > > # char *KV_micro(string) > > # > > # Return the Micro (Z of X.Y.Z) kernel version. > > # > > KV_micro() { > > [[ -z $1 ]] && return 1 > > > > local KV="$@" > > KV="${KV#*.*.}" > > echo "${KV%%[^[:digit:]]*}" > > } > > > > # int KV_to_int(string) > > # > > # Convert a string type kernel version (2.4.0) to an int (132096) > > # for easy compairing or versions ... > > # > > KV_to_int() { > > [[ -z $1 ]] && return 1 > > > > local KV_MAJOR="$(KV_major "$1")" > > local KV_MINOR="$(KV_minor "$1")" > > local KV_MICRO="$(KV_micro "$1")" > > local KV_int="$(( KV_MAJOR * 65536 + KV_MINOR * 256 + KV_MICRO ))" > > > > # We make version 2.2.0 the minimum version we will handle as > > # a sanity check ... if its less, we fail ... > > if [[ ${KV_int} -ge 131584 ]] ; then > > echo "${KV_int}" > > return 0 > > fi > > > > return 1 > > } > > > > # int get_KV() > > # > > # Return the kernel version (major, minor and micro concated) as an > > integer. > > # Assumes X and Y of X.Y.Z are numbers. Also assumes that some > > leading # portion of Z is a number. > > # e.g. 2.4.25, 2.6.10, 2.6.4-rc3, 2.2.40-poop, 2.0.15+foo > > # > > _RC_GET_KV_CACHE="" > > ++ _RC_GET_KV_CACHE= > > get_KV() { > > [[ -z ${_RC_GET_KV_CACHE} ]] \ > > && _RC_GET_KV_CACHE="$(uname -r)" > > > > echo "$(KV_to_int "${_RC_GET_KV_CACHE}")" > > > > return $? > > } > > > > # bool get_bootparam(param) > > # > > # return 0 if gentoo=param was passed to the kernel > > # > > # EXAMPLE: if get_bootparam "nodevfs" ; then .... > > # > > get_bootparam() { > > local x copt params retval=1 > > > > [[ ! -r /proc/cmdline ]] && return 1 > > > > for copt in $(< /proc/cmdline) ; do > > if [[ ${copt%=*} == "gentoo" ]] ; then > > params=$(gawk -v PARAMS="${copt##*=}" ' > > BEGIN { > > split(PARAMS, nodes, ",") > > for (x in nodes) > > print nodes[x] > > }') > > > > # Parse gentoo option > > for x in ${params} ; do > > if [[ ${x} == "$1" ]] ; then > > # echo "YES" > > retval=0 > > fi > > done > > fi > > done > > > > return ${retval} > > } > > > > # Safer way to list the contents of a directory, > > # as it do not have the "empty dir bug". > > # > > # char *dolisting(param) > > # > > # print a list of the directory contents > > # > > # NOTE: quote the params if they contain globs. > > # also, error checking is not that extensive ... > > # > > dolisting() { > > local x= > > local y= > > local tmpstr= > > local mylist= > > local mypath="$*" > > > > if [[ ${mypath%/\*} != "${mypath}" ]] ; then > > mypath=${mypath%/\*} > > fi > > > > for x in ${mypath} ; do > > [[ ! -e ${x} ]] && continue > > > > if [[ ! -d ${x} ]] && [[ -L ${x} || -f ${x} ]] ; then > > mylist="${mylist} $(ls "${x}" 2> /dev/null)" > > else > > [[ ${x%/} != "${x}" ]] && x=${x%/} > > > > cd "${x}"; tmpstr=$(ls) > > > > for y in ${tmpstr} ; do > > mylist="${mylist} ${x}/${y}" > > done > > fi > > done > > > > echo "${mylist}" > > } > > > > > > # char *add_suffix(char * configfile) > > # > > # Returns a config file name with the softlevel suffix > > # appended to it. For use with multi-config services. > > add_suffix() { > > if [[ ${RC_USE_CONFIG_PROFILE} != "yes" ]] ; then > > echo "$1" > > return 0 > > fi > > > > local suffix="${SOFTLEVEL}" > > [[ ${SOFTLEVEL} == "${BOOTLEVEL}" \ > > > > || ${SOFTLEVEL} == "reboot" \ > > || ${SOFTLEVEL} == "shutdown" \ > > || ${SOFTLEVEL} == "single" ]] \ > > > > && suffix="${DEFAULTLEVEL}" > > if [[ -e "$1.${suffix}" ]] ; then > > echo "$1.${suffix}" > > else > > echo "$1" > > fi > > > > return 0 > > } > > > > # char *get_base_ver() > > # > > # get the version of baselayout that this system is running > > # > > get_base_ver() { > > [[ ! -r /etc/gentoo-release ]] && return 0 > > local ver="$(</etc/gentoo-release)" > > echo "${ver##* }" > > } > > > > # Network filesystems list for common use in rc-scripts. > > # This variable is used in is_net_fs and other places such as > > # localmount. > > NET_FS_LIST="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs > > smbfs" ++ NET_FS_LIST='afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 > > shfs smbfs' > > > > # bool is_net_fs(path) > > # > > # return 0 if path is the mountpoint of a networked filesystem > > # > > # EXAMPLE: if is_net_fs / ; then ... > > # > > is_net_fs() { > > local fstype > > # /proc/mounts is always accurate but may not always be available > > if [[ -e /proc/mounts ]] ; then > > fstype="$( sed -n -e '/^rootfs/!s:.* '"$1"' \([^ ]*\).*: > > \1:p' /proc/mounts )" > > else > > fstype="$( mount | sed -n -e 's:.* on '"$1"' type \([^ > > ]*\).*: > > \1:p' )" > > fi > > [[ " ${NET_FS_LIST} " == *" ${fstype} "* ]] > > return $? > > } > > > > # bool is_net_fs(path) > > # > > # return 0 if path is under unionfs control > > # > > # EXAMPLE: if is_union_fs / ; then ... > > # > > is_union_fs() { > > [[ ! -x /sbin/unionctl ]] && return 1 > > unionctl "$1" --list &>/dev/null > > } > > > > # bool is_uml_sys() > > # > > # return 0 if the currently running system is User Mode Linux > > # > > # EXAMPLE: if is_uml_sys ; then ... > > # > > is_uml_sys() { > > grep -qs 'UML' /proc/cpuinfo > > } > > > > # bool is_vserver_sys() > > # > > # return 0 if the currently running system is a Linux VServer > > # > > # EXAMPLE: if is_vserver_sys ; then ... > > # > > is_vserver_sys() { > > grep -qs '^s_context:[[:space:]]*[1-9]' /proc/self/status > > } > > > > # bool is_vz_sys() > > # > > # return 0 if the currently running system is OpenVZ container > > # > > # EXAMPLE: if is_vz_sys ; then ... > > # > > is_vz_sys() { > > grep -qs '^envID:[[:space:]]*[1-9]' /proc/self/status > > } > > > > # bool is_xenU_sys() > > # > > # return 0 if the currently running system is an unprivileged Xen > > domain # > > # EXAMPLE: if is_xenU_sys ; then ... > > # > > is_xenU_sys() { > > [[ ! -d /proc/xen ]] && return 1 > > [[ ! -r /proc/xen/capabilities ]] && return 1 > > grep -q "control_d" /proc/xen/capabilities && return 1 > > return 0 > > } > > > > # bool get_mount_fstab(path) > > # > > # return the parameters to pass to the mount command generated from > > fstab # > > # EXAMPLE: cmd=$( get_mount_fstab /proc ) > > # cmd=${cmd:--t proc none /proc} > > # mount -n ${cmd} > > # > > get_mount_fstab() { > > gawk '$1 ~ "^#" { next } > > $2 == "'$*'" { stab="-t "$3" -o "$4" "$1" "$2; } > > END { print stab; } > > ' /etc/fstab > > } > > > > # char *reverse_list(list) > > # > > # Returns the reversed order of list > > # > > reverse_list() { > > for (( i = $# ; i > 0 ; --i )) ; do > > echo -n "${!i} " > > done > > } > > > > # void start_addon(addon) > > # > > # Starts addon. > > # > > start_addon() { > > local addon="$1" > > (import_addon "${addon}-start.sh") > > return 0 > > } > > > > # void stop_addon(addon) > > # > > # Stops addon. > > # > > stop_addon() { > > local addon=$1 > > (import_addon "${addon}-stop.sh") > > return 0 > > } > > > > # bool is_older_than(reference, files/dirs to check) > > # > > # return 0 if any of the files/dirs are newer than > > # the reference file > > # > > # EXAMPLE: if is_older_than a.out *.o ; then ... > > is_older_than() { > > local x= > > local ref="$1" > > shift > > > > for x in "$@" ; do > > [[ ${x} -nt ${ref} ]] && return 0 > > [[ -d ${x} ]] && is_older_than "${ref}" "${x}"/* && return > > 0 done > > > > return 1 > > } > > > > # char* bash_variable(char *variable) > > # > > # Turns the given variable into something that bash can use > > # Basically replaces anything not a-z,A-Z into a _ > > # > > bash_variable() { > > local args="$@" > > LC_ALL=C echo "${args//[![:word:]]/_}" > > } > > > > # void requote() > > # > > # Requotes params so they're suitable to be eval'd, just like this > > would: # set -- 1 2 "3 4" > > # /usr/bin/getopt -- '' "$@" | sed 's/^ -- //' > > # > > requote() { > > local q=\' > > set -- "${@//\'/$q\'$q}" # quote inner instances of ' > > set -- "${@/#/$q}" # add ' to start of each > > param > > set -- "${@/%/$q}" # add ' to end of each > > param echo "$*" > > } > > > > # char* uniqify(char *arg, ...) > > # > > # Ensure that params are unique > > # > > uniqify() { > > local result= x= > > while [[ -n "$1" ]] ; do > > [[ " ${result} " != *" $1 "* ]] && result="${result} $1" > > shift > > done > > echo "${result# *}" > > } > > > > > > ######################################################################### > >##### # > > # > > # This should be the last code in here, please add all functions above!! > > # > > # > > # > > # *** START LAST CODE *** > > # > > # > > # > > > > ######################################################################### > >##### > > > > if [[ -z ${EBUILD} ]] ; then > > # Setup a basic $PATH. Just add system default to existing. > > # This should solve both /sbin and /usr/sbin not present when > > # doing 'su -c foo', or for something like: PATH= rcscript start > > PATH="/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/sbin:${PATH}" > > > > # Cache the CONSOLETYPE - this is important as backgrounded shells > > don't > > # have a TTY. rc unsets it at the end of running so it shouldn't > > hang > > # around > > if [[ -z ${CONSOLETYPE} ]] ; then > > export CONSOLETYPE="$( /sbin/consoletype 2>/dev/null )" > > fi > > if [[ ${CONSOLETYPE} == "serial" ]] ; then > > RC_NOCOLOR="yes" > > RC_ENDCOL="no" > > fi > > > > for arg in "$@" ; do > > case "${arg}" in > > # Lastly check if the user disabled it with > > --nocolor > > argument > > --nocolor|-nc) > > RC_NOCOLOR="yes" > > ;; > > esac > > done > > > > setup_defaultlevels > > > > # If we are not /sbin/rc then ensure that we cannot change level > > variables > > if [[ -n ${BASH_SOURCE} \ > > && ${BASH_SOURCE[${#BASH_SOURCE[@]}-1]} != "/sbin/rc" ]] ; > > then > > declare -r BOOTLEVEL DEFAULTLEVEL SOFTLEVEL > > fi > > else > > # Should we use colors ? > > if [[ $* != *depend* ]] ; then > > # Check user pref in portage > > RC_NOCOLOR="$(portageq envvar NOCOLOR 2>/dev/null)" > > [[ ${RC_NOCOLOR} == "true" ]] && RC_NOCOLOR="yes" > > else > > # We do not want colors during emerge depend > > RC_NOCOLOR="yes" > > # No output is seen during emerge depend, so this is not > > needed. > > RC_ENDCOL="no" > > fi > > fi > > ++ [[ -z '' ]] > > ++ > > > > PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/sbin:/sbin:/bin:/usr/sbin:/ > >usr/bin ++ [[ -z '' ]] > > /sbin/consoletype 2>/dev/null > > +++ /sbin/consoletype > > ++ export CONSOLETYPE=pty > > ++ CONSOLETYPE=pty > > ++ [[ pty == \s\e\r\i\a\l ]] > > ++ setup_defaultlevels > > ++ get_bootconfig > > ++ local copt= > > ++ local newbootlevel= > > ++ local newsoftlevel= > > ++ [[ -r /proc/cmdline ]] > > </proc/cmdline > > ++ for copt in '$(</proc/cmdline)' > > ++ case "${copt%=*}" in > > ++ for copt in '$(</proc/cmdline)' > > ++ case "${copt%=*}" in > > ++ for copt in '$(</proc/cmdline)' > > ++ case "${copt%=*}" in > > ++ for copt in '$(</proc/cmdline)' > > ++ case "${copt%=*}" in > > ++ for copt in '$(</proc/cmdline)' > > ++ case "${copt%=*}" in > > ++ [[ -n '' ]] > > ++ export BOOTLEVEL=boot > > ++ BOOTLEVEL=boot > > ++ [[ -n '' ]] > > ++ export DEFAULTLEVEL=default > > ++ DEFAULTLEVEL=default > > ++ return 0 > > ++ get_bootparam noconfigprofile > > ++ local x copt params retval=1 > > ++ [[ ! -r /proc/cmdline ]] > > < /proc/cmdline > > ++ for copt in '$(< /proc/cmdline)' > > ++ [[ root == \g\e\n\t\o\o ]] > > ++ for copt in '$(< /proc/cmdline)' > > ++ [[ init == \g\e\n\t\o\o ]] > > ++ for copt in '$(< /proc/cmdline)' > > ++ [[ ramdisk == \g\e\n\t\o\o ]] > > ++ for copt in '$(< /proc/cmdline)' > > ++ [[ real_root == \g\e\n\t\o\o ]] > > ++ for copt in '$(< /proc/cmdline)' > > ++ [[ udev == \g\e\n\t\o\o ]] > > ++ return 1 > > ++ get_bootparam configprofile > > ++ local x copt params retval=1 > > ++ [[ ! -r /proc/cmdline ]] > > < /proc/cmdline > > ++ for copt in '$(< /proc/cmdline)' > > ++ [[ root == \g\e\n\t\o\o ]] > > ++ for copt in '$(< /proc/cmdline)' > > ++ [[ init == \g\e\n\t\o\o ]] > > ++ for copt in '$(< /proc/cmdline)' > > ++ [[ ramdisk == \g\e\n\t\o\o ]] > > ++ for copt in '$(< /proc/cmdline)' > > ++ [[ real_root == \g\e\n\t\o\o ]] > > ++ for copt in '$(< /proc/cmdline)' > > ++ [[ udev == \g\e\n\t\o\o ]] > > ++ return 1 > > ++ [[ yes == \y\e\s ]] > > ++ [[ -n default ]] > > ++ [[ -d /etc/runlevels/boot.default ]] > > ++ [[ -L /etc/runlevels/boot.default ]] > > ++ [[ -z '' ]] > > ++ [[ -f /var/lib/init.d/softlevel ]] > > < "${svcdir}/softlevel" > > ++ export SOFTLEVEL=default > > ++ SOFTLEVEL=default > > ++ return 0 > > ++ [[ -n /etc/init.d/functions.sh ]] > > ++ [[ /usr/bin/revdep-rebuild != \/\s\b\i\n\/\r\c ]] > > ++ declare -r BOOTLEVEL DEFAULTLEVEL SOFTLEVEL > > > > if [[ -n ${EBUILD} && $* == *depend* ]] ; then > > # We do not want stty to run during emerge depend > > COLS=80 > > else > > # Setup COLS and ENDCOL so eend can line up the [ ok ] > > COLS="${COLUMNS:-0}" # bash's internal COLUMNS variable > > (( COLS == 0 )) && COLS="$(set -- `stty size 2>/dev/null` ; > > echo "$2")" > > (( COLS > 0 )) || (( COLS = 80 )) # width of [ ok ] == 7 > > fi > > ++ [[ -n '' ]] > > ++ COLS=0 > > ++ (( COLS == 0 )) > > set -- `stty size 2>/dev/null` ; echo "$2" > > stty size 2>/dev/null > > ++++ stty size > > +++ set -- 56 172 > > +++ echo 172 > > ++ COLS=172 > > ++ (( COLS > 0 )) > > > > if [[ ${RC_ENDCOL} == "yes" ]] ; then > > ENDCOL=$'\e[A\e['$(( COLS - 8 ))'C' > > else > > ENDCOL='' > > fi > > ++ [[ yes == > > \y\e\s ]] > > > > ' > > ++ ENDCOL=' > > # Setup the colors so our messages all look pretty > > if [[ ${RC_NOCOLOR} == "yes" ]] ; then > > unset GOOD WARN BAD NORMAL HILITE BRACKET > > else > > GOOD=$'\e[32;01m' > > WARN=$'\e[33;01m' > > BAD=$'\e[31;01m' > > HILITE=$'\e[36;01m' > > BRACKET=$'\e[34;01m' > > NORMAL=$'\e[0m' > > fi > > ++ [[ no == \y\e\s ]] > > ++ GOOD='' > > ++ WARN='' > > ++ BAD='' > > ++ HILITE='' > > ++ BRACKET='' > > ++ NORMAL='' > > > > > > ######################################################################### > >##### # > > # > > # *** END LAST CODE *** > > # > > # > > # > > # This should be the last code in here, please add all functions above!! > > # > > # > > # > > > > ######################################################################### > >##### > > > > > > # vim:ts=4 > > + normalize_emerge_opts > > + EMERGE_OPTIONS=(${EMERGE_OPTIONS[@]/%-p/--pretend}) > > + EMERGE_OPTIONS=(${EMERGE_OPTIONS[@]/%-f/--fetchonly}) > > + EMERGE_OPTIONS=(${EMERGE_OPTIONS[@]/%-f/--verbose}) > > + [[ '' != *--pretend* ]] > > + [[ 0 -ne 0 ]] > > + setup_portage > > portageq envvar PORTAGE_NICENESS > > ++ portageq envvar PORTAGE_NICENESS > > + local PORTAGE_NICENESS= > > portageq envvar ROOT > > ++ portageq envvar ROOT > > + PORTAGE_ROOT=/ > > + [[ -n '' ]] > > + PORTAGE_ROOT=/ > > + setup_search_paths_and_masks > > + local configfile sdir mdir skip_me filter_SEARCH_DIRS > > + einfo 'Configuring search environment for revdep-rebuild' > > + einfon 'Configuring search environment for revdep-rebuild\n' > > + [[ no == \y\e\s ]] > > + [[ yes != \y\e\s ]] > > + echo -ne ' * Configuring search environment for revdep-rebuild\n' > > + LAST_E_CMD=einfon > > + return 0 > > + LAST_E_CMD=einfo > > + return 0 > > unset SEARCH_DIRS; portageq envvar SEARCH_DIRS > > ++ unset SEARCH_DIRS > > ++ portageq envvar SEARCH_DIRS > > + SEARCH_DIRS+=' ' > > unset SEARCH_DIRS_MASK; portageq envvar SEARCH_DIRS_MASK > > ++ unset SEARCH_DIRS_MASK > > ++ portageq envvar SEARCH_DIRS_MASK > > + SEARCH_DIRS_MASK+=' ' > > unset LD_LIBRARY_MASK; portageq envvar LD_LIBRARY_MASK > > ++ unset LD_LIBRARY_MASK > > ++ portageq envvar LD_LIBRARY_MASK > > + LD_LIBRARY_MASK+=' ' > > + [[ -d /etc/revdep-rebuild ]] > > + for configfile in '/etc/revdep-rebuild/*' > > . $configfile; echo $SEARCH_DIRS > > ++ . /etc/revdep-rebuild/60-java > > # The VM dynamically loads these at runtime so they will end up as > > missing # but actually work just fine. See for example > > # https://bugs.gentoo.org/show_bug.cgi?id=152039 > > # > > # This file should only have files the are used by things like swt. If > > there > > # are "broken" links inside the jre itself, the jre should install it's > > own # control file. > > > > LD_LIBRARY_MASK="libjvm.so libjawt.so" > > +++ LD_LIBRARY_MASK='libjvm.so libjawt.so' > > ++ echo > > + SEARCH_DIRS+=' ' > > . $configfile; echo $SEARCH_DIRS_MASK > > ++ . /etc/revdep-rebuild/60-java > > # The VM dynamically loads these at runtime so they will end up as > > missing # but actually work just fine. See for example > > # https://bugs.gentoo.org/show_bug.cgi?id=152039 > > # > > # This file should only have files the are used by things like swt. If > > there > > # are "broken" links inside the jre itself, the jre should install it's > > own # control file. > > > > LD_LIBRARY_MASK="libjvm.so libjawt.so" > > +++ LD_LIBRARY_MASK='libjvm.so libjawt.so' > > ++ echo > > + SEARCH_DIRS_MASK+=' ' > > . $configfile; echo $LD_LIBRARY_MASK > > ++ . /etc/revdep-rebuild/60-java > > # The VM dynamically loads these at runtime so they will end up as > > missing # but actually work just fine. See for example > > # https://bugs.gentoo.org/show_bug.cgi?id=152039 > > # > > # This file should only have files the are used by things like swt. If > > there > > # are "broken" links inside the jre itself, the jre should install it's > > own # control file. > > > > LD_LIBRARY_MASK="libjvm.so libjawt.so" > > +++ LD_LIBRARY_MASK='libjvm.so libjawt.so' > > ++ echo libjvm.so libjawt.so > > + LD_LIBRARY_MASK+=' libjvm.so libjawt.so' > > + for configfile in '/etc/revdep-rebuild/*' > > . $configfile; echo $SEARCH_DIRS > > ++ . /etc/revdep-rebuild/61-sun-jdk-1.6 > > SEARCH_DIRS_MASK="/opt/sun-jdk-1.6.0.07" > > +++ SEARCH_DIRS_MASK=/opt/sun-jdk-1.6.0.07 > > ++ echo > > + SEARCH_DIRS+=' ' > > . $configfile; echo $SEARCH_DIRS_MASK > > ++ . /etc/revdep-rebuild/61-sun-jdk-1.6 > > SEARCH_DIRS_MASK="/opt/sun-jdk-1.6.0.07" > > +++ SEARCH_DIRS_MASK=/opt/sun-jdk-1.6.0.07 > > ++ echo /opt/sun-jdk-1.6.0.07 > > + SEARCH_DIRS_MASK+=' /opt/sun-jdk-1.6.0.07' > > . $configfile; echo $LD_LIBRARY_MASK > > ++ . /etc/revdep-rebuild/61-sun-jdk-1.6 > > SEARCH_DIRS_MASK="/opt/sun-jdk-1.6.0.07" > > +++ SEARCH_DIRS_MASK=/opt/sun-jdk-1.6.0.07 > > ++ echo libjvm.so libjawt.so > > + LD_LIBRARY_MASK+=' libjvm.so libjawt.so' > > + for configfile in '/etc/revdep-rebuild/*' > > . $configfile; echo $SEARCH_DIRS > > ++ . /etc/revdep-rebuild/99revdep-rebuild > > # Default revdep-rebuild configuration file > > # > > # revdep-rebuild no longer uses hardcoded paths. To change the default > > # behavior the following variables can be changed: > > # > > # LD_LIBRARY_MASK - Mask of specially evaluated libraries > > # > > # SEARCH_DIRS - List of directories to search for executables and > > libraries # Use this for directories that are not included in PATH > > or ld.so.conf. > > # An application should normally not have to set this variable > > # > > # SEARCH_DIRS_MASK - List of directories to not search > > # Use this for directories that should not be searched by > > revdep-rebuild > > # This is normally used by binary packages such as openoffice-bin > > # > > # Note: This file is sourced using bash by the revdep-rebuild script > > > > LD_LIBRARY_MASK="libodbcinst.so libodbc.so libjava.so libjvm.so" > > +++ LD_LIBRARY_MASK='libodbcinst.so libodbc.so libjava.so libjvm.so' > > SEARCH_DIRS="/bin /sbin /usr/bin /usr/sbin /lib* /usr/lib*" > > +++ SEARCH_DIRS='/bin /sbin /usr/bin /usr/sbin /lib* /usr/lib*' > > SEARCH_DIRS_MASK="/lib*/modules" > > +++ SEARCH_DIRS_MASK='/lib*/modules' > > > > ++ > > echo /bin /sbin /usr/bin /usr/sbin /lib /lib32 /lib64 /usr/lib /usr/lib32 > > /usr/lib64 /usr/libexec > > + > > SEARCH_DIRS+=' /bin /sbin /usr/bin /usr/sbin /lib /lib32 /lib64 /usr/lib > > /usr/lib32 /usr/lib64 /usr/libexec' > > . $configfile; echo $SEARCH_DIRS_MASK > > ++ . /etc/revdep-rebuild/99revdep-rebuild > > # Default revdep-rebuild configuration file > > # > > # revdep-rebuild no longer uses hardcoded paths. To change the default > > # behavior the following variables can be changed: > > # > > # LD_LIBRARY_MASK - Mask of specially evaluated libraries > > # > > # SEARCH_DIRS - List of directories to search for executables and > > libraries # Use this for directories that are not included in PATH > > or ld.so.conf. > > # An application should normally not have to set this variable > > # > > # SEARCH_DIRS_MASK - List of directories to not search > > # Use this for directories that should not be searched by > > revdep-rebuild > > # This is normally used by binary packages such as openoffice-bin > > # > > # Note: This file is sourced using bash by the revdep-rebuild script > > > > LD_LIBRARY_MASK="libodbcinst.so libodbc.so libjava.so libjvm.so" > > +++ LD_LIBRARY_MASK='libodbcinst.so libodbc.so libjava.so libjvm.so' > > SEARCH_DIRS="/bin /sbin /usr/bin /usr/sbin /lib* /usr/lib*" > > +++ SEARCH_DIRS='/bin /sbin /usr/bin /usr/sbin /lib* /usr/lib*' > > SEARCH_DIRS_MASK="/lib*/modules" > > +++ SEARCH_DIRS_MASK='/lib*/modules' > > > > ++ echo /lib64/modules /lib/modules > > + SEARCH_DIRS_MASK+=' /lib64/modules /lib/modules' > > . $configfile; echo $LD_LIBRARY_MASK > > ++ . /etc/revdep-rebuild/99revdep-rebuild > > # Default revdep-rebuild configuration file > > # > > # revdep-rebuild no longer uses hardcoded paths. To change the default > > # behavior the following variables can be changed: > > # > > # LD_LIBRARY_MASK - Mask of specially evaluated libraries > > # > > # SEARCH_DIRS - List of directories to search for executables and > > libraries # Use this for directories that are not included in PATH > > or ld.so.conf. > > # An application should normally not have to set this variable > > # > > # SEARCH_DIRS_MASK - List of directories to not search > > # Use this for directories that should not be searched by > > revdep-rebuild > > # This is normally used by binary packages such as openoffice-bin > > # > > # Note: This file is sourced using bash by the revdep-rebuild script > > > > LD_LIBRARY_MASK="libodbcinst.so libodbc.so libjava.so libjvm.so" > > +++ LD_LIBRARY_MASK='libodbcinst.so libodbc.so libjava.so libjvm.so' > > SEARCH_DIRS="/bin /sbin /usr/bin /usr/sbin /lib* /usr/lib*" > > +++ SEARCH_DIRS='/bin /sbin /usr/bin /usr/sbin /lib* /usr/lib*' > > SEARCH_DIRS_MASK="/lib*/modules" > > +++ SEARCH_DIRS_MASK='/lib*/modules' > > > > ++ echo libodbcinst.so libodbc.so libjava.so libjvm.so > > + LD_LIBRARY_MASK+=' libodbcinst.so libodbc.so libjava.so libjvm.so' > > + [[ -r /etc/profile.env ]] > > + [[ -s /etc/profile.env ]] > > . /etc/profile.env; /usr/bin/tr ':' ' ' <<< "$ROOTPATH $PATH" > > ++ . /etc/profile.env > > # THIS FILE IS AUTOMATICALLY GENERATED BY env-update. > > # DO NOT EDIT THIS FILE. CHANGES TO STARTUP PROFILES > > # GO INTO /etc/profile NOT /etc/profile.env > > > > export CLASSPATH='.' > > +++ export CLASSPATH=. > > +++ CLASSPATH=. > > export CONFIG_PROTECT='/var/bind' > > +++ export CONFIG_PROTECT=/var/bind > > +++ CONFIG_PROTECT=/var/bind > > export > > CONFIG_PROTECT_MASK='/etc/env.d/java/ /etc/php/cli-php5/ext-active/ > > /etc/php/cgi-php5/ext-active/ /etc/php/apache2-php5/ext-active/ > > /etc/udev/rules.d /etc/terminfo /etc/ca-certificates.conf > > /etc/revdep-rebuild' > > +++ > > export 'CONFIG_PROTECT_MASK=/etc/env.d/java/ > > /etc/php/cli-php5/ext-active/ /etc/php/cgi-php5/ext-active/ > > /etc/php/apache2-php5/ext-active/ > > /etc/udev/rules.d /etc/terminfo /etc/ca-certificates.conf > > /etc/revdep-rebuild' > > +++ > > CONFIG_PROTECT_MASK='/etc/env.d/java/ /etc/php/cli-php5/ext-active/ > > /etc/php/cgi-php5/ext-active/ /etc/php/apache2-php5/ext-active/ > > /etc/udev/rules.d /etc/terminfo /etc/ca-certificates.conf > > /etc/revdep-rebuild' > > export CVS_RSH='ssh' > > +++ export CVS_RSH=ssh > > +++ CVS_RSH=ssh > > export GCC_SPECS='' > > +++ export GCC_SPECS= > > +++ GCC_SPECS= > > export > > > > INFOPATH='/usr/share/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2. > >18/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.1.2/info' +++ export > > > > INFOPATH=/usr/share/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.1 > >8/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.1.2/info +++ > > > > INFOPATH=/usr/share/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.1 > >8/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.1.2/info export > > LANG='hu_HU.UTF-8' > > +++ export LANG=hu_HU.UTF-8 > > +++ LANG=hu_HU.UTF-8 > > export LANGUAGE='hu_HU.UTF-8:hu' > > +++ export LANGUAGE=hu_HU.UTF-8:hu > > +++ LANGUAGE=hu_HU.UTF-8:hu > > export LC_ADDRESS='hu_HU.UTF-8' > > +++ export LC_ADDRESS=hu_HU.UTF-8 > > +++ LC_ADDRESS=hu_HU.UTF-8 > > export LC_ALL='hu_HU.UTF-8' > > +++ export LC_ALL=hu_HU.UTF-8 > > +++ LC_ALL=hu_HU.UTF-8 > > export LC_COLLATE='hu_HU.UTF-8' > > +++ export LC_COLLATE=hu_HU.UTF-8 > > +++ LC_COLLATE=hu_HU.UTF-8 > > export LC_CTYPE='hu_HU.UTF-8' > > +++ export LC_CTYPE=hu_HU.UTF-8 > > +++ LC_CTYPE=hu_HU.UTF-8 > > export LC_IDENTIFICATION='hu_HU.UTF-8' > > +++ export LC_IDENTIFICATION=hu_HU.UTF-8 > > +++ LC_IDENTIFICATION=hu_HU.UTF-8 > > export LC_MEASUREMENT='hu_HU.UTF-8' > > +++ export LC_MEASUREMENT=hu_HU.UTF-8 > > +++ LC_MEASUREMENT=hu_HU.UTF-8 > > export LC_MESSAGES='hu_HU.UTF-8' > > +++ export LC_MESSAGES=hu_HU.UTF-8 > > +++ LC_MESSAGES=hu_HU.UTF-8 > > export LC_MONETARY='hu_HU.UTF-8' > > +++ export LC_MONETARY=hu_HU.UTF-8 > > +++ LC_MONETARY=hu_HU.UTF-8 > > export LC_NAME='hu_HU.UTF-8' > > +++ export LC_NAME=hu_HU.UTF-8 > > +++ LC_NAME=hu_HU.UTF-8 > > export LC_NUMERIC='hu_HU.UTF-8' > > +++ export LC_NUMERIC=hu_HU.UTF-8 > > +++ LC_NUMERIC=hu_HU.UTF-8 > > export LC_PAPER='hu_HU.UTF-8' > > +++ export LC_PAPER=hu_HU.UTF-8 > > +++ LC_PAPER=hu_HU.UTF-8 > > export LC_TELEPHONE='hu_HU.UTF-8' > > +++ export LC_TELEPHONE=hu_HU.UTF-8 > > +++ LC_TELEPHONE=hu_HU.UTF-8 > > export LC_TIME='hu_HU.UTF-8' > > +++ export LC_TIME=hu_HU.UTF-8 > > +++ LC_TIME=hu_HU.UTF-8 > > export LESS='-R -M --shift 5' > > +++ export 'LESS=-R -M --shift 5' > > +++ LESS='-R -M --shift 5' > > export LESSOPEN='|lesspipe.sh %s' > > +++ export 'LESSOPEN=|lesspipe.sh %s' > > +++ LESSOPEN='|lesspipe.sh %s' > > export > > > > MANPATH='/usr/local/share/man:/usr/share/man:/usr/share/binutils-data/x86 > >_64-pc-linux-gnu/2.18/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.1.2/ma > >n:/etc/java-config/system-vm/man/:/usr/lib64/php5/man/' +++ export > > > > MANPATH=/usr/local/share/man:/usr/share/man:/usr/share/binutils-data/x86_ > >64-pc-linux-gnu/2.18/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.1.2/man > >:/etc/java-config/system-vm/man/:/usr/lib64/php5/man/ +++ > > > > MANPATH=/usr/local/share/man:/usr/share/man:/usr/share/binutils-data/x86_ > >64-pc-linux-gnu/2.18/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.1.2/man > >:/etc/java-config/system-vm/man/:/usr/lib64/php5/man/ export > > PAGER='/usr/bin/less' > > +++ export PAGER=/usr/bin/less > > +++ PAGER=/usr/bin/less > > export > > PATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2:/usr/games/bin' > > +++ export > > PATH=/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2:/usr/games/bin > > +++ PATH=/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2:/usr/games/bin > > export PYTHONPATH='/usr/lib64/portage/pym' > > +++ export PYTHONPATH=/usr/lib64/portage/pym > > +++ PYTHONPATH=/usr/lib64/portage/pym > > export ROOTPATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2' > > +++ export ROOTPATH=/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2 > > +++ ROOTPATH=/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2 > > ++ /usr/bin/tr : ' ' > > + > > SEARCH_DIRS+=' /opt/bin /usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2 /opt/bin > > /usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2 /usr/games/bin' > > + [[ -r /etc/ld.so.conf ]] > > + [[ -s /etc/ld.so.conf ]] > > sed '/^#/d;s/#.*$//' /etc/ld.so.conf > > ++ sed '/^#/d;s/#.*$//' /etc/ld.so.conf > > + SEARCH_DIRS+=' /usr/local/lib > > /lib > > /usr/lib > > /lib64 > > /usr/lib64 > > /usr/local/lib64 > > /lib32 > > /usr/lib32 > > /usr/local/lib32 > > /usr/x86_64-pc-linux-gnu/lib > > /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2 > > /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/32 > > /usr/games/lib > > /usr/games/lib32 > > /usr/lib64/libstdc++-v3/' > > clean_var <<< "$SEARCH_DIRS" > > ++ clean_var > > ++ awk 'BEGIN {RS="[[:space:]]"} > > /-\*/ {exit} > > /[^[:space:]]/ {gsub(/\/\/+/, "/"); print}' > > ++ sort -u > > + SEARCH_DIRS='/bin > > /lib > > /lib32 > > /lib64 > > /opt/bin > > /sbin > > /usr/bin > > /usr/games/bin > > /usr/games/lib > > /usr/games/lib32 > > /usr/lib > > /usr/lib32 > > /usr/lib64 > > /usr/lib64/libstdc++-v3/ > > /usr/libexec > > /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2 > > /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/32 > > /usr/local/lib > > /usr/local/lib32 > > /usr/local/lib64 > > /usr/sbin > > /usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2 > > /usr/x86_64-pc-linux-gnu/lib' > > clean_var <<< "$SEARCH_DIRS_MASK" > > ++ clean_var > > ++ awk 'BEGIN {RS="[[:space:]]"} > > /-\*/ {exit} > > /[^[:space:]]/ {gsub(/\/\/+/, "/"); print}' > > ++ sort -u > > + SEARCH_DIRS_MASK='/lib64/modules > > /lib/modules > > /opt/sun-jdk-1.6.0.07' > > clean_var <<< "$LD_LIBRARY_MASK" > > ++ clean_var > > ++ awk 'BEGIN {RS="[[:space:]]"} > > /-\*/ {exit} > > /[^[:space:]]/ {gsub(/\/\/+/, "/"); print}' > > ++ sort -u > > + LD_LIBRARY_MASK='libjava.so > > libjawt.so > > libjvm.so > > libodbcinst.so > > libodbc.so' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /bin == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /bin == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /bin == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /bin' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /lib == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /lib == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /lib == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /lib' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /lib32 == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /lib32 == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /lib32 == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /lib32' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /lib64 == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /lib64 == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /lib64 == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /lib64' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /opt/bin == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /opt/bin == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /opt/bin == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /opt/bin' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /sbin == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /sbin == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /sbin == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /sbin' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/bin == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/bin == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/bin == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /usr/bin' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/games/bin == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/games/bin == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/games/bin == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /usr/games/bin' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/games/lib == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/games/lib == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/games/lib == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /usr/games/lib' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/games/lib32 == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/games/lib32 == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/games/lib32 == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /usr/games/lib32' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/lib == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/lib == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/lib == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /usr/lib' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/lib32 == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/lib32 == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/lib32 == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /usr/lib32' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/lib64 == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/lib64 == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/lib64 == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /usr/lib64' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/lib64/libstdc++-v3/ == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/lib64/libstdc++-v3/ == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/lib64/libstdc++-v3/ == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /usr/lib64/libstdc++-v3/' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/libexec == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/libexec == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/libexec == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /usr/libexec' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2 == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2 == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2 == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/32 == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/32 == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/32 == /opt/sun-jdk-1.6.0.07/* > > ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/32' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/local/lib == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/local/lib == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/local/lib == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /usr/local/lib' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/local/lib32 == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/local/lib32 == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/local/lib32 == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /usr/local/lib32' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/local/lib64 == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/local/lib64 == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/local/lib64 == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /usr/local/lib64' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/sbin == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/sbin == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/sbin == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /usr/sbin' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2 == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2 == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2 == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2' > > + for sdir in '${SEARCH_DIRS}' > > + skip_me= > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/x86_64-pc-linux-gnu/lib == /lib64/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/x86_64-pc-linux-gnu/lib == /lib/modules/* ]] > > + for mdir in '${SEARCH_DIRS_MASK}' > > + [[ /usr/x86_64-pc-linux-gnu/lib == /opt/sun-jdk-1.6.0.07/* ]] > > + [[ -n '' ]] > > + filter_SEARCH_DIRS+=' /usr/x86_64-pc-linux-gnu/lib' > > clean_var <<< "${filter_SEARCH_DIRS}" > > ++ clean_var > > ++ awk 'BEGIN {RS="[[:space:]]"} > > /-\*/ {exit} > > /[^[:space:]]/ {gsub(/\/\/+/, "/"); print}' > > ++ sort -u > > + SEARCH_DIRS='/bin > > /lib > > /lib32 > > /lib64 > > /opt/bin > > /sbin > > /usr/bin > > /usr/games/bin > > /usr/games/lib > > /usr/games/lib32 > > /usr/lib > > /usr/lib32 > > /usr/lib64 > > /usr/lib64/libstdc++-v3/ > > /usr/libexec > > /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2 > > /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/32 > > /usr/local/lib > > /usr/local/lib32 > > /usr/local/lib64 > > /usr/sbin > > /usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2 > > /usr/x86_64-pc-linux-gnu/lib' > > + [[ -n /bin > > /lib > > /lib32 > > /lib64 > > /opt/bin > > /sbin > > /usr/bin > > /usr/games/bin > > /usr/games/lib > > /usr/games/lib32 > > /usr/lib > > /usr/lib32 > > /usr/lib64 > > /usr/lib64/libstdc++-v3/ > > /usr/libexec > > /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2 > > /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/32 > > /usr/local/lib > > /usr/local/lib32 > > /usr/local/lib64 > > /usr/sbin > > /usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2 > > /usr/x86_64-pc-linux-gnu/lib ]] > > + get_search_env > > + local new_env > > + local old_env > > python -c 'import os; import pwd; print pwd.getpwuid(os.getuid())[0]' > > ++ python -c 'import os; import pwd; print pwd.getpwuid(os.getuid())[0]' > > + local uid=root > > + [[ root == \r\o\o\t ]] > > + local tmp_target=/var/cache/revdep-rebuild > > + verify_tmpdir /var/cache/revdep-rebuild root > > + umask 007 > > + [[ ! -n /var/cache/revdep-rebuild ]] > > + [[ -d /var/cache/revdep-rebuild ]] > > find "$1" -type d ! \( -user $2 -perm -0700 \) > > ++ find /var/cache/revdep-rebuild -type d '!' '(' -user root -perm -0700 > > ')' > > ++ hash find > > type -P find > > +++ type -P find > > ++ local testsubject=/usr/bin/find > > command find "$testsubject" -executable 2> /dev/null > > +++ command find /usr/bin/find -executable > > ++ [[ -n /usr/bin/find ]] > > ++ unset -f find > > ++ find /var/cache/revdep-rebuild -type d '!' '(' -user root -perm -0700 > > ')' > > + [[ -n '' ]] > > + cd /var/cache/revdep-rebuild > > + builtin cd -P /var/cache/revdep-rebuild > > + [[ /var/cache/revdep-rebuild != /var/mnt/cache/revdep-rebuild ]] > > + die 1 'Working directory expected to be /var/cache/revdep-rebuild, but > > it is /var/mnt/cache/revdep-rebuild' > > + local status=1 > > + shift > > + eerror 'Working directory expected to be /var/cache/revdep-rebuild, but > > it > > is /var/mnt/cache/revdep-rebuild' > > + [[ no == \y\e\s ]] > > + [[ yes != \y\e\s ]] > > + echo -e ' * Working directory expected to be /var/cache/revdep-rebuild, > > but > > it is /var/mnt/cache/revdep-rebuild' > > + local name=rc-scripts > > + [[ /usr/bin/revdep-rebuild != \/\s\b\i\n\/\r\u\n\s\c\r\i\p\t\.\s\h ]] > > + name=revdep-rebuild > > + esyslog daemon.err rc-scripts 'Working directory expected to > > be /var/cache/revdep-rebuild, but it is /var/mnt/cache/revdep-rebuild' > > + local pri= > > + local tag= > > + [[ -x /usr/bin/logger ]] > > + pri=daemon.err > > + tag=rc-scripts > > + shift 2 > > + [[ -z Working directory expected to be /var/cache/revdep-rebuild, but > > it is /var/mnt/cache/revdep-rebuild ]] > > + /usr/bin/logger -p daemon.err -t rc-scripts -- 'Working directory > > expected > > to be /var/cache/revdep-rebuild, but it is /var/mnt/cache/revdep-rebuild' > > + return 0 > > + LAST_E_CMD=eerror > > + return 0 > > + exit 1