Re: R815 & H310 - impossible to update firmware with OMSA

On 24/07/15 17:56, lejeczek wrote:
> hi everybody
> I wonder if any of you had any luck updating H310 in R815
> using OMSA?
> it fails for me, with:
>
> ..
> Checking PERC H310 Adapter Controller 0 Firmware - 20.12.1-0002
>       Available:
> pci_firmware(ven_0x1000_dev_0x0073_subven_0x1028_subdev_0x1f4e)
> - 20.13.1-0002
>       Found Update:
> pci_firmware(ven_0x1000_dev_0x0073_subven_0x1028_subdev_0x1f4e)
> - 20.13.1-0002
> ...
>
> which is already weir, if my logic of above is ok then it's
> trying to update the same versions?
> and I get:
nope, it actually is version higher than what's on the 
controller.
>
>     420.731330] AMD-Vi: Event logged [IO_PAGE_FAULT
> device=06:00.0 domain=0x001b address=0x00000000dd669000
> flags=0x0010]
> [  420.846482] megaraid_sas: wait adp restart
> [  420.846496] megasas: moving
> cmd[0]:ffff881c09784360:1:          (null) the defer queue
> as internal
> [  420.846501] megasas: fwState=f0000000, stage:1
> [  420.846527] megaraid_sas: FW detected to be in
> faultstate, restarting it...
> [  420.853111] AMD-Vi: Event logged [IO_PAGE_FAULT
> device=06:00.0 domain=0x001b address=0x00000000dd669000
> flags=0x0030]
> [  421.292008] AMD-Vi: Event logged [IO_PAGE_FAULT
> device=06:00.0 domain=0x001b address=0x00000000dd669000
> flags=0x0010]
> [  421.846408] ADP_RESET_GEN2: HostDiag=a0
> [  431.943736] RESET_GEN2: retry=0, hostdiag=a4
> [  432.044687] RESET_GEN2: retry=1, hostdiag=a4
> [  432.145642] RESET_GEN2: retry=2, hostdiag=a4
> [  432.246595] RESET_GEN2: retry=3, hostdiag=a4
> [  432.347549] RESET_GEN2: retry=4, hostdiag=a4
> [  432.448502] RESET_GEN2: retry=5, hostdiag=a4
> [  432.549457] RESET_GEN2: retry=6, hostdiag=a4
> [  432.650408] RESET_GEN2: retry=7, hostdiag=a4
> ..
> ..
>
> many thanks.
>
> _______________________________________________
> Linux-PowerEdge mailing list
> [email protected]
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
>