Re: R815 & H310 - impossible to update firmware with OMSA

lejeczek <[email protected]>
Newsgroups gmane.linux.hardware.dell.poweredge
Message-ID <[email protected]>
On 24/07/15 17:56, lejeczek wrote:
> hi everybody
> I wonder if any of you had any luck updating H310 in R815
> using OMSA?
> it fails for me, with:
>
> ..
> Checking PERC H310 Adapter Controller 0 Firmware - 20.12.1-0002
>       Available:
> pci_firmware(ven_0x1000_dev_0x0073_subven_0x1028_subdev_0x1f4e)
> - 20.13.1-0002
>       Found Update:
> pci_firmware(ven_0x1000_dev_0x0073_subven_0x1028_subdev_0x1f4e)
> - 20.13.1-0002
> ...
>
> which is already weir, if my logic of above is ok then it's
> trying to update the same versions?
> and I get:
>
>     420.731330] AMD-Vi: Event logged [IO_PAGE_FAULT
> device=06:00.0 domain=0x001b address=0x00000000dd669000
> flags=0x0010]
> [  420.846482] megaraid_sas: wait adp restart
> [  420.846496] megasas: moving
> cmd[0]:ffff881c09784360:1:          (null) the defer queue
> as internal
> [  420.846501] megasas: fwState=f0000000, stage:1
> [  420.846527] megaraid_sas: FW detected to be in
> faultstate, restarting it...
> [  420.853111] AMD-Vi: Event logged [IO_PAGE_FAULT
> device=06:00.0 domain=0x001b address=0x00000000dd669000
> flags=0x0030]
> [  421.292008] AMD-Vi: Event logged [IO_PAGE_FAULT
> device=06:00.0 domain=0x001b address=0x00000000dd669000
> flags=0x0010]
> [  421.846408] ADP_RESET_GEN2: HostDiag=a0
> [  431.943736] RESET_GEN2: retry=0, hostdiag=a4
> [  432.044687] RESET_GEN2: retry=1, hostdiag=a4
> [  432.145642] RESET_GEN2: retry=2, hostdiag=a4
> [  432.246595] RESET_GEN2: retry=3, hostdiag=a4
> [  432.347549] RESET_GEN2: retry=4, hostdiag=a4
> [  432.448502] RESET_GEN2: retry=5, hostdiag=a4
> [  432.549457] RESET_GEN2: retry=6, hostdiag=a4
> [  432.650408] RESET_GEN2: retry=7, hostdiag=a4
> ..
> ..
>
> many thanks.
>
> _______________________________________________
> Linux-PowerEdge mailing list
> [email protected]
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
>
there is something fundamentally wrong there with R815 & 
H310, even megacli does not work.
But it does, flashes H310 with megacli in different 
hardware, though process might be a bit flaky.
Dell-OMSA devel? an expert insight would be nice.
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.