Re: Not finding later bios version on an R630
jsl6uy js16uy <[email protected]>
| Newsgroups | gmane.linux.hardware.dell.poweredge |
|---|---|
| Message-ID | <CAAGD8_TPLFPcxJd=2weQfyt6Wq-2EyHniFJYxseZQi5OYP-1GQ@mail.gmail.com> |
Thanks to you both! I never remember to leverage my serial number on Dell's site. I really wish that repo manager ran on linux. The features have always sounded great. Thanks again for the quick/spot on help Mr. Smith. And I'll just continue to try to badger Dell people to put the repo manager on linux ;) On Wed, Aug 26, 2015 at 8:14 PM, WillDo <[email protected]> wrote: > Another option that I have found useful for learning of new updates since > almost all of my R720 and R730 are identically configured is to use Dell > Repository Manager. > > I connect to one of my iDRAC's to determine my starting baseline that I > use to create my Repository. > Once I setup my initial Repository of what is updateable in my systems I > never touch it again unless I add a new adapter. > Then I use the Schedule Repository Search option to search on a regular > basis (I have it set for once a week). > If a new update is found to one in my Repository, I get an email > notification and that DUP is put into my Repository and the old one is > placed in an Archive if I need to get to it. > The service looks to be reading the content from the Drivers and Download > page. > That way when I am ready to do my maintenance on my data center I know I > have the latest as of that date. > I have been using this method to keep my repository fresh for a couple of > years. > > I have been using Repository Manager for a few years, it looks like the > catalog cadence is now twice a month so it is never very far off what is > available on the Drivers and Download page. Yes Repository Manager is a > Windows application but I have found it is useful enough and it can run on > a Laptop so I just keep an old Laptop around. Mostly my team is on > Chromebooks. But that is another story. > > Looking at the Linux Repository it seems that it is now on a Monthly > cadence where before it was on a quarterly cadence. > > Will > > > On 8/26/2015 7:32 PM, Cameron Smith wrote: > > No worries :) > > In the future an easy way to be sure of what updates are available for a > specific model is enter your SN here: > http://www.dell.com/support/my-support/us/en/04/product-support/servicetag > > Then click on Driver and Downloads links. It seems to be more up to date > than the catalog for OME. > > Also Google search will get you better results for drivers on the Dell > site than a Dell site search if the above method is not available. > > > Cameron Smith > Technical Operations Manager > Network Redux, LLC > 5200 SW Macadam Ave Ste 450 > Portland, Oregon 97239 > Cell: 503-926-4928 > > On Wed, Aug 26, 2015 at 3:38 PM, jsl6uy js16uy <[email protected]> wrote: > >> Well there you go. Whomped with the DUH cane. I searched for that >> version, CLEARLY POORLY, via google->Various Dell web site links. I must >> have been hitting the r620 version, which stated it was out of date. R620s >> are at 2.5.2 Next time will walk Dell's site directly. >> >> Thanks very much sir! Apologies all for the spam >> >> On Wed, Aug 26, 2015 at 5:28 PM, Cameron Smith < >> <[email protected]>[email protected]> wrote: >> >>> 1.3.6 is the latest BIOS for R630: >>> >>> >>> http://www.dell.com/support/home/us/en/RC1005904/Drivers/DriversDetails?driverId=FKKC6&fileId=3481904044&osCode=NAA&productCode=poweredge-r630&languageCode=EN&categoryId=BI >>> >>> >>> Cameron Smith >>> Technical Operations Manager >>> Network Redux, LLC >>> 5200 SW Macadam Ave Ste 450 >>> Portland, Oregon 97239 >>> Cell: 503-926-4928 >>> >>> On Wed, Aug 26, 2015 at 3:21 PM, jsl6uy js16uy < <[email protected]> >>> [email protected]> wrote: >>> >>>> Apologies poking again, maybe I'm missing the obvious. Feel free to >>>> smack me with the DUH cane if needs be >>>> >>>> 2 hosts Centos 6u5 stuck on bios 1.3.6 some details below. >>>> Only noticeable difference is that these servers are using 2699 Intel >>>> cpus vs some of our other servers. Does that matter? >>>> >>>> [root@X ~]# dsu -i >>>> Getting System Inventory... >>>> >>>> 1. OpenManage Server Administrator ( Version : 8.1.0 ) >>>> >>>> 2. BIOS ( Version : 1.3.6 ) >>>> >>>> 3. Lifecycle Controller ( Version : 2.15.10.10 ) >>>> >>>> 4. Dell 64 Bit uEFI Diagnostics ( Version : 4239A19 ) >>>> >>>> 5. OS COLLECTOR 1.1, OSC_1.1, A00 ( Version : OSC_1.1 ) >>>> >>>> 6. Power Supply ( Version : 00.1D.6D ) >>>> >>>> 7. Power Supply ( Version : 00.1D.6D ) >>>> >>>> 8. PERC H730P Mini Controller 0 Firmware ( Version : 25.3.0.0016 ) >>>> >>>> 9. Firmware for - Disk 0 in Backplane 1 of PERC H730P Mini Controller >>>> 0 ( Version : DF09 ) >>>> >>>> 10. 13G Backplane Expander FW ( Version : 3.03 ) >>>> >>>> 11. iDRAC ( Version : 2.15.10.10 ) >>>> >>>> 12. Intel(R) Gigabit 4P I350-t rNDC ( Version : 16.5.20 ) >>>> >>>> 13. Intel(R) Gigabit 4P I350-t rNDC ( Version : 16.5.20 ) >>>> >>>> 14. Intel(R) Gigabit 4P I350-t rNDC ( Version : 16.5.20 ) >>>> >>>> 15. Intel(R) Gigabit 4P I350-t rNDC ( Version : 16.5.20 ) >>>> >>>> [root@X ~]# >>>> >>>> [root@X ~]# rpm -qa|grep -Pi dell >>>> dell-system-update-1.1-15.08.00.x86_64 >>>> [root@X ~]# >>>> >>>> [root@X ~]# uname -a >>>> Linux X 2.6.32-431.5.1.el6.x86_64 #1 SMP Wed Feb 12 00:41:43 UTC 2014 >>>> x86_64 x86_64 x86_64 GNU/Linux >>>> [root@X ~]# cat /etc/redhat-release >>>> CentOS release 6.5 (Final) >>>> [root@X ~]# >>>> >>>> >>>> [root@X1 ~]# dsu -i >>>> Getting System Inventory... >>>> >>>> 1. BIOS ( Version : 1.3.6 ) >>>> >>>> 2. Lifecycle Controller ( Version : 2.15.10.10 ) >>>> >>>> 3. Dell 64 Bit uEFI Diagnostics ( Version : 4239A19 ) >>>> >>>> 4. OS COLLECTOR 1.1, OSC_1.1, A00 ( Version : OSC_1.1 ) >>>> >>>> 5. Power Supply ( Version : 00.1D.6D ) >>>> >>>> 6. Power Supply ( Version : 00.1D.6D ) >>>> >>>> 7. PERC H730P Mini Controller 0 Firmware ( Version : 25.3.0.0016 ) >>>> >>>> 8. Firmware for - Disk 0 in Backplane 1 of PERC H730P Mini Controller >>>> 0 ( Version : DF09 ) >>>> >>>> 9. 13G Backplane Expander FW ( Version : 3.03 ) >>>> >>>> 10. iDRAC ( Version : 2.15.10.10 ) >>>> >>>> 11. Intel(R) Gigabit 4P I350-t rNDC ( Version : 16.5.20 ) >>>> >>>> 12. Intel(R) Gigabit 4P I350-t rNDC ( Version : 16.5.20 ) >>>> >>>> 13. Intel(R) Gigabit 4P I350-t rNDC ( Version : 16.5.20 ) >>>> >>>> 14. Intel(R) Gigabit 4P I350-t rNDC ( Version : 16.5.20 ) >>>> >>>> [root@X1 ~]# >>>> >>>> [root@X1 ~]# uname -a >>>> Linux X1 2.6.32-431.5.1.el6.x86_64 #1 SMP Wed Feb 12 00:41:43 UTC 2014 >>>> x86_64 x86_64 x86_64 GNU/Linux >>>> [root@X1 ~]# rpm -qa|grep -Pi dell >>>> dell-system-update-1.1-15.08.00.x86_64 >>>> [root@X1 ~]# >>>> >>>> >>>> On Thu, Aug 20, 2015 at 6:11 PM, jsl6uy js16uy < <[email protected]> >>>> [email protected]> wrote: >>>> >>>>> Hello all, hope all is well >>>>> >>>>> Have an R630 that when running dsu -n, it is not pulling new updates >>>>> Any ideas as to why? >>>>> >>>>> [root@X ~]# rpm -qa|grep -Pi dell >>>>> dell-system-update-1.1-15.07.00.x86_64 >>>>> [root@X ~]# >>>>> >>>>> [root@X ~]# dsu -i >>>>> Getting System Inventory... >>>>> >>>>> 1. BIOS ( Version : 1.3.6 )****************old bios >>>>> >>>>> 2. Lifecycle Controller ( Version : 2.15.10.10 ) >>>>> >>>>> 3. Dell 64 Bit uEFI Diagnostics, version 4239, 4239A14, 4239.22 ( >>>>> Version : 4239A14 ) >>>>> >>>>> 4. OS COLLECTOR 1.1, OSC_1.1, A00 ( Version : OSC_1.1 ) >>>>> >>>>> 5. Power Supply ( Version : 00.1D.6D ) >>>>> >>>>> 6. Power Supply ( Version : 00.1D.6D ) >>>>> >>>>> 7. PERC H730P Mini Controller 0 Firmware ( Version : 25.3.0.0016 ) >>>>> >>>>> 8. AL13SXB300N Firmware ( Version : DF09 ) >>>>> >>>>> 9. AL13SXB300N Firmware ( Version : DF09 ) >>>>> >>>>> 10. AL13SXB300N Firmware ( Version : DF09 ) >>>>> >>>>> 11. AL13SXB300N Firmware ( Version : DF09 ) >>>>> >>>>> 12. AL13SXB300N Firmware ( Version : DF09 ) >>>>> >>>>> 13. AL13SXB300N Firmware ( Version : DF09 ) >>>>> >>>>> 14. 13G Backplane Expander FW ( Version : 3.03 ) >>>>> >>>>> 15. iDRAC ( Version : 2.15.10.10 ) >>>>> >>>>> 16. Intel(R) Gigabit 4P I350-t rNDC ( Version : 16.5.20 ) >>>>> >>>>> 17. Intel(R) Gigabit 4P I350-t rNDC ( Version : 16.5.20 ) >>>>> >>>>> 18. Intel(R) Gigabit 4P I350-t rNDC ( Version : 16.5.20 ) >>>>> >>>>> 19. Intel(R) Gigabit 4P I350-t rNDC ( Version : 16.5.20 ) >>>>> >>>>> [root@X yum.repos.d]# dsu -n >>>>> Getting System Inventory... >>>>> Determining Applicable Updates... >>>>> >>>>> Done! Please run 'dsu --inventory' to check the inventory >>>>> >>>>> >>>>> [root@X ~]# dsu >>>>> --get=CE >>>>> [163/217] >>>>> Getting System Inventory... >>>>> Determining Applicable Updates... >>>>> >>>>> |-----------Dell System Updates-----------| >>>>> [ ] represents 'not selected' >>>>> [*] represents 'selected' >>>>> [-] represents 'Component already at repository version (cannot be >>>>> selected)' >>>>> Choose: q - Quit without update, c to Commit, <number> - To >>>>> Select/Deselect, a - Select All, n - Select None >>>>> >>>>> Enter your choice : q >>>>> >>>>> >>>>> [root@X ~]# >>>>> [root@X ~]# dmidecode -t system >>>>> # dmidecode 2.11 >>>>> # SMBIOS entry point at 0x7ab0a000 >>>>> SMBIOS 2.8 present. >>>>> # SMBIOS implementations newer than version 2.7 are not >>>>> # fully supported by this version of dmidecode. >>>>> >>>>> Handle 0x0100, DMI type 1, 27 bytes >>>>> System Information >>>>> Manufacturer: Dell Inc. >>>>> Product Name: PowerEdge R630 >>>>> CPU:Version: Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> Linux-PowerEdge mailing list >>>> [email protected] >>>> https://lists.us.dell.com/mailman/listinfo/linux-poweredge >>>> >>>> >>> >> > > > _______________________________________________ > Linux-PowerEdge mailing [email protected]://lists.us.dell.com/mailman/listinfo/linux-poweredge > > > > _______________________________________________ > Linux-PowerEdge mailing list > [email protected] > https://lists.us.dell.com/mailman/listinfo/linux-poweredge > > _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge