Re: DSU repository: August 2015

After installing invcol...
Not sure why it's looking to run xterm...

[root@ilga01u10 ~]# export LANG=en_US.UTF-8
[root@ilga01u10 ~]# sh /usr/libexec/dell_dup/invcol_V8336_LN64_15.06.00_A00
/usr/libexec/dell_dup/invcol_V8336_LN64_15.06.00_A00: line 45: exec: xterm: not found
[root@ilga01u10 ~]# TERM=xterm sh /usr/libexec/dell_dup/invcol_V8336_LN64_15.06.00_A00
<?xml version="1.0" encoding="UTF-8"?>


<SVMInventory lang="en" schemaVersion="1.0" invcolVersion="15.06.200 (BLD_406)" invcolBuild="406" timeStamp="2015-09-21T07:54:42">
        <OperatingSystem osCode="LIN" osVendor="Redhat" osArch="x64" majorVersion="package redhat-release-server is not installed" minorVersion="2.6.32-504.8.1.el6.x86_64"/>
        <System systemID="04CE"/><Device componentID="159" display="BIOS"><Application componentType="BIOS" version="2.4.3" display="BIOS"/></Device>
        <Device vendorID="1000" deviceID="005b" subDeviceID="1f38" subVendorID="1028" bus="2" device="0" function="0" display="PERC H710 Mini Controller 0"><Application componentType="FRMW" version="21.3.0-0009" display="PERC H710 Mini Controller 0 Firmware"/></Device>
        <Device componentID="25852" enum="CtrlId 0 DeviceId 0" display="ST9300653SS"><Application componentType="FRMW" version="YS0A" display="Firmware for  - Disk 0 in Backplane 1 of PERC H710 Mini Controller 0  "/></Device>
        <Device componentID="25852" enum="CtrlId 0 DeviceId 1" display="ST9300653SS"><Application componentType="FRMW" version="YS0A" display="Firmware for  - Disk 1 in Backplane 1 of PERC H710 Mini Controller 0  "/></Device>
        <Device componentID="26018" enum="BayID 1 DeviceID 20" display="12G SEP Firmware"><Application componentType="FRMW" version="1.00" display="12G SEP Firmware "/></Device>
        <Device componentID="25227" display=" iDRAC">
      <Application componentType="FRMW" version="1.40.40.00" display=" iDRAC"/>
   </Device>
        <Device vendorID="14e4" deviceID="168a" subVendorID="1028" subDeviceID="1f5c" bus="1" device="0" function="0" display="BCM57800 10-Gigabit Ethernet rev 10 (em1)">
                <Application componentType="FRMW" version="7.10.18" display="BCM57800 10-Gigabit Ethernet rev 10 (em1)"/>
        </Device>
        <Device vendorID="14e4" deviceID="168a" subVendorID="1028" subDeviceID="1f5c" bus="1" device="0" function="1" display="BCM57800 10-Gigabit Ethernet rev 10 (em2)">
                <Application componentType="FRMW" version="7.10.18" display="BCM57800 10-Gigabit Ethernet rev 10 (em2)"/>
        </Device>
        <Device vendorID="14e4" deviceID="168a" subVendorID="1028" subDeviceID="1f67" bus="1" device="0" function="2" display="BCM57800 1-Gigabit Ethernet rev 10 (em3)">
                <Application componentType="FRMW" version="7.10.18" display="BCM57800 1-Gigabit Ethernet rev 10 (em3)"/>
        </Device>
        <Device vendorID="14e4" deviceID="168a" subVendorID="1028" subDeviceID="1f67" bus="1" device="0" function="3" display="BCM57800 1-Gigabit Ethernet rev 10 (em4)">
                <Application componentType="FRMW" version="7.10.18" display="BCM57800 1-Gigabit Ethernet rev 10 (em4)"/>
        </Device>
        </SVMInventory>


<?xml version="1.0" encoding="UTF-8"?>
<InventoryError lang="en"><SPStatus result="false" module="MaserIE -i"><Message> Inventory Failure: System Services is disabled</Message></SPStatus><SPStatus result="false" module="MaserIE -i"><Message>Invalid inventory results.</Message></SPStatus><SPStatus result="false" module="psdup -i"><Message> Update Failure: System Services is disabled</Message></SPStatus><SPStatus result="false" module="psdup -i"><Message>Invalid inventory results.</Message></SPStatus></InventoryError>


From: [email protected] [mailto:[email protected]]
Sent: Saturday, September 19, 2015 1:19 PM
To: Beckley, Owen; [email protected]
Subject: RE: [Linux-PowerEdge] DSU repository: August 2015


Dell - Internal Use - Confidential
 Hi,

This could be an inventory collector issue. Please try the following to run the inventory collector directly.

#  yum install invcol_V8336_LN64_15.06.00_A00
and run the inventory collector from /usr/libexec/dell_dup/invcol_V8336_LN64_15.06.00_A00
(sh /usr/libexec/dell_dup/invcol_V8336_LN64_15.06.00_A00)

Share the resulting xml output with us.

Thanks,
Soorej

_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge