| Newsgroups |
gmane.linux.hardware.dell.poweredge |
| Message-ID |
<D8C50530D6022F40A817A35C40CC06A71E8885C8FB@DUBX7MCDUB01.EMEA.DELL.COM> |
Dell Customer Communication
Subject : DSET report on R720 failure
I came across similar issues today and I used fix from :
http://crtech.tips/dell-dset-cimom-error/
After turning off selinux on RHEL 6.6 DSET 3.7 runs fine
-----Original Message-----
From: linux-poweredge-bounces-Lists On Behalf Of linux-poweredge-request-Lists
Sent: 08 October 2015 16:50
To: linux-poweredge-Lists
Subject: Linux-PowerEdge Digest, Vol 137, Issue 4
Send Linux-PowerEdge mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific than "Re: Contents of Linux-PowerEdge digest..."
Today's Topics:
1. OMSA SSL Certificate renewal ([email protected])
2. DSET report on R720 failure (Stephen Berg (Contractor))
3. Re: DSET report on R720 failure (Francesco Ciocchetti)
4. Re: DSET report on R720 failure (Stephen Berg (Contractor))
5. DSET report on R720 failure ([email protected])
----------------------------------------------------------------------
Message: 1
Date: Thu, 8 Oct 2015 13:09:15 +0530
From:
Subject: [Linux-PowerEdge] OMSA SSL Certificate renewal
To: ,
Message-ID:
Content-Type: text/plain; charset="us-ascii"
Hello Jason,
OMSA has a feature where we can manage (Create, Maintenance, import) SSL certificate without updating/upgrading. Please refer the OMSA UG using the following URL for more details.
Refer the section "X.509 Certificate Management" in the Page 38.
OMSA UG: http://topics-cdn.dell.com/pdf/dell-opnmang-srvr-admin-v8.2_User's%20Guide2_en-us.pdf
Kindly let us know if you need more details.
Regards
Chandra
----------------------------------------------------------------------
Message: 1
Date: Tue, 6 Oct 2015 19:40:15 +0000
From: Jason Gress
Subject: [Linux-PowerEdge] OMSA SSL Certificate renewal
To: "[email protected]"
Message-ID:
Content-Type: text/plain; charset="us-ascii"
Our security scanning software is picking up on the older expired Dell certificates on our many OMSA installs. Is there an appropriate way to refresh these certificates without updating the installed OMSA software? I am concerned that older servers (e.g. 910s) and older OSs may not like (or we may not be allowed to) upgrade the installed srvadmin packages. Unfortunately we cannot ignore this because we need to pass an audit.
We are running RHEL/OEL 6 on most of the affected machines.
Thank you for your advice,
Jason Gress
"This message and any attachments may contain confidential information. If you have received this message in error, any use or distribution is prohibited.
Please notify us by reply e-mail if you have mistakenly received this message, and immediately and permanently delete it and any attachments. Thank you."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20151006/5a5c69bd/attachment-0001.html
------------------------------
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
End of Linux-PowerEdge Digest, Vol 137, Issue 3
***********************************************
------------------------------
Message: 2
Date: Thu, 8 Oct 2015 07:08:30 -0500
From: "Stephen Berg (Contractor)"
Subject: [Linux-PowerEdge] DSET report on R720 failure
To: [email protected]
Message-ID:
Content-Type: text/plain; charset=utf-8; format=flowed
Got an R720 running SciLinux 6.6, OMSA 8.2.0 is installed. Trying to generate a DSET report so I can have it ready when I call in a failing power supply and the DSET tool refuses to run.
---------------------
Dell System E-Support Tool, Version 3.7.0
@2004-2014 Dell Inc. All Rights Reserved.
sblim-sfcb (CIMOM) validation is not successful.
For successful installation of DSET, reinstall or upgrade sblim-sfcb from Operating System Media.
---------------------
sblim-sfcb is installed and running
I ran into a similar issue back in May, posted to this list about it but never got an answer.
http://lists.us.dell.com/pipermail/linux-poweredge/2015-May/049782.html
--
Stephen Berg
Systems Administrator
NRL Code: 7320
Office: 228-688-5738
[email protected]
------------------------------
Message: 3
Date: Thu, 8 Oct 2015 15:19:22 +0100
From: Francesco Ciocchetti
Subject: Re: [Linux-PowerEdge] DSET report on R720 failure
To: "Stephen Berg (Contractor)"
Cc: [email protected]
Message-ID:
Content-Type: text/plain; charset="utf-8"
The only time i managed to run the DEST was through the DELL LiveCD
http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=CWF92
If you can reboot your box with a livecd it will work.
Francesco Ciocchetti
Senior System Administrator
+44 (0)203 416 4245
On 8 October 2015 at 13:08, Stephen Berg (Contractor) <
[email protected]> wrote:
> Got an R720 running SciLinux 6.6, OMSA 8.2.0 is installed. Trying to
> generate a DSET report so I can have it ready when I call in a failing
> power supply and the DSET tool refuses to run.
>
> ---------------------
> Dell System E-Support Tool, Version 3.7.0
> @2004-2014 Dell Inc. All Rights Reserved.
>
> sblim-sfcb (CIMOM) validation is not successful.
>
> For successful installation of DSET, reinstall or upgrade sblim-sfcb
> from Operating System Media.
> ---------------------
>
> sblim-sfcb is installed and running
>
> I ran into a similar issue back in May, posted to this list about it but
> never got an answer.
> http://lists.us.dell.com/pipermail/linux-poweredge/2015-May/049782.html
>
>
> --
> Stephen Berg
> Systems Administrator
> NRL Code: 7320
> Office: 228-688-5738
> [email protected]
>
> _______________________________________________
> Linux-PowerEdge mailing list
> [email protected]
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
>
--
Mintel Group Ltd | 11 Pilgrim Street | London | EC4V 6RN
Registered in England: Number 1475918. | VAT Number: GB 232 9342 72
Contact details for our other offices can be found at
http://www.mintel.com/office-locations.
This email and any attachments may include content that is confidential,
privileged
or otherwise protected under applicable law. Unauthorised disclosure,
copying, distribution
or use of the contents is prohibited and may be unlawful. If you have
received this email in error,
including without appropriate authorisation, then please reply to the
sender about the error
and delete this email and any attachments.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20151008/0f07b140/attachment-0001.html
------------------------------
Message: 4
Date: Thu, 8 Oct 2015 09:27:24 -0500
From: "Stephen Berg (Contractor)"
Subject: Re: [Linux-PowerEdge] DSET report on R720 failure
To: [email protected]
Message-ID:
Content-Type: text/plain; charset=utf-8; format=flowed
Not a good option for the system in question. I did figure out that an
older DSET 3.5.1 seems to run just fine.
On 10/08/2015 09:19 AM, Francesco Ciocchetti wrote:
> The only time i managed to run the DEST was through the DELL LiveCD
>
> http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=CWF92
>
> If you can reboot your box with a livecd it will work.
>
>
>
> Francesco Ciocchetti
> Senior System Administrator
> +44 (0)203 416 4245
>
> On 8 October 2015 at 13:08, Stephen Berg (Contractor) <
> [email protected]> wrote:
>
>> Got an R720 running SciLinux 6.6, OMSA 8.2.0 is installed. Trying to
>> generate a DSET report so I can have it ready when I call in a failing
>> power supply and the DSET tool refuses to run.
>>
>> ---------------------
>> Dell System E-Support Tool, Version 3.7.0
>> @2004-2014 Dell Inc. All Rights Reserved.
>>
>> sblim-sfcb (CIMOM) validation is not successful.
>>
>> For successful installation of DSET, reinstall or upgrade sblim-sfcb
>> from Operating System Media.
>> ---------------------
>>
>> sblim-sfcb is installed and running
>>
>> I ran into a similar issue back in May, posted to this list about it but
>> never got an answer.
>> http://lists.us.dell.com/pipermail/linux-poweredge/2015-May/049782.html
>>
>>
>> --
>> Stephen Berg
>> Systems Administrator
>> NRL Code: 7320
>> Office: 228-688-5738
>> [email protected]
>>
>> _______________________________________________
>> Linux-PowerEdge mailing list
>> [email protected]
>> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
>>
--
Stephen Berg
Systems Administrator
NRL Code: 7320
Office: 228-688-5738
[email protected]
------------------------------
Message: 5
Date: Thu, 8 Oct 2015 21:19:19 +0530
From:
Subject: [Linux-PowerEdge] DSET report on R720 failure
To: ,
Message-ID:
Content-Type: text/plain; charset="utf-8"
Hi Stephen,
The following DSET documentation explains about credential less CIMOM (SFCB) authentication which might help you to resolve your issue. Please make sure that your server has SFCB 1.3.11 version or later.
http://www.dell.com/support/manuals/ed/en/msdhs1/Topic/dell-systm-esuprt-tool-v3.6/DSET36IG-v4/en-us/GUID-75BEA864-E16D-4996-9B54-832FDA499F0E
Regards
Chandra
-----Original Message-----
From: linux-poweredge-bounces-Lists On Behalf Of Stephen Berg (Contractor)
Sent: Thursday, October 08, 2015 5:39 PM
To: linux-poweredge-Lists
Subject: [Linux-PowerEdge] DSET report on R720 failure
Got an R720 running SciLinux 6.6, OMSA 8.2.0 is installed. Trying to generate a DSET report so I can have it ready when I call in a failing power supply and the DSET tool refuses to run.
---------------------
Dell System E-Support Tool, Version 3.7.0
@2004-2014 Dell Inc. All Rights Reserved.
sblim-sfcb (CIMOM) validation is not successful.
For successful installation of DSET, reinstall or upgrade sblim-sfcb from Operating System Media.
---------------------
sblim-sfcb is installed and running
I ran into a similar issue back in May, posted to this list about it but never got an answer.
http://lists.us.dell.com/pipermail/linux-poweredge/2015-May/049782.html
--
Stephen Berg
Systems Administrator
NRL Code: 7320
Office: 228-688-5738
[email protected]
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20151008/bcd4b745/attachment.html
------------------------------
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
End of Linux-PowerEdge Digest, Vol 137, Issue 4
***********************************************
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge