Perc H700 firmware upgrade Debian

Hi,

tried to upgrade Perc H700 Integrated firmware on Debian (Wheezy).

# /opt/dell/srvadmin/bin/omreport about

Product name : Dell OpenManage Server Administrator
Version      : 7.4.0-1
Copyright    : Copyright (C) Dell Inc. 1995-2013 All rights reserved.
Company      : Dell Inc.


# /opt/dell/srvadmin/bin/omreport storage controller
Controller  PERC H700 Integrated (Slot 4)

Controllers
ID                                            : 0
Status                                        : Non-Critical
Name                                          : PERC H700 Integrated
Slot ID                                       : PCI Slot 4
State                                         : Degraded
Firmware Version                              : 12.10.1-0001
Latest Available Firmware Version             : 12.10.5-0001
Driver Version                                : 00.00.06.12-rc1
Minimum Required Driver Version               : Not Applicable
Storport Driver Version                       : Not Applicable
Minimum Required Storport Driver Version      : Not Applicable
[…]

# cat /etc/debian_version 
7.9


# wget http://downloads.dell.com/FOLDER03292779M/4/SAS-RAID_Firmware_2948G_LN_12.10.7-0001_A13_02.BIN

# chmod 777 SAS-RAID_Firmware_2948G_LN_12.10.7-0001_A13_02.BIN

# bash ./SAS-RAID_Firmware_2948G_LN_12.10.7-0001_A13_02.BIN --extract RAIDFW
# cd RAIDFW/
# ./sasdupie -u -s payload/
<?xml version="1.0" encoding="UTF-8"?><SVMExecution lang="en"><RebootRequired>0</RebootRequired></SVMExecution>

There is no “The operation was successful” and “<RebootRequired>1</RebootRequired>” as answer of the last step. So it went wrong.


Is it possible to upgrade from the shell? How can I upgrade else?

TIA

Helmut Wollmersdorfer

_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge