Re: Perc H700 firmware upgrade Debian

Jean-Daniel TISSOT <[email protected]> Tue, 24 May 2016 17:34:10 +0200
Newsgroups gmane.linux.hardware.dell.poweredge
Organization CNRS - UMR6249
Message-ID <[email protected]>
Hi,

If you have a iDRAC Enterprise, you can boot on Life Cycle to upgrade your firmware.
I am on Debian too and as DLR is no more supported by Dell, there is no simple way to upgrade firmware.


Le 24/05/2016 à 13:55, Helmut Wollmersdorfer a écrit :
> Hi,
>
> tried to upgrade Perc H700 Integrated firmware on Debian (Wheezy).
>
> # /opt/dell/srvadmin/bin/omreport about
>
> Product name : Dell OpenManage Server Administrator
> Version      : 7.4.0-1
> Copyright    : Copyright (C) Dell Inc. 1995-2013 All rights reserved.
> Company      : Dell Inc.
>
>
> # /opt/dell/srvadmin/bin/omreport storage controller
> Controller  PERC H700 Integrated (Slot 4)
>
> Controllers
> ID                                            : 0
> Status                                        : Non-Critical
> Name                                          : PERC H700 Integrated
> Slot ID                                       : PCI Slot 4
> State                                         : Degraded
> Firmware Version                              : 12.10.1-0001
> Latest Available Firmware Version             : 12.10.5-0001
> Driver Version                                : 00.00.06.12-rc1
> Minimum Required Driver Version               : Not Applicable
> Storport Driver Version                       : Not Applicable
> Minimum Required Storport Driver Version      : Not Applicable
> […]
>
> # cat /etc/debian_version 
> 7.9
>
>
> # wget http://downloads.dell.com/FOLDER03292779M/4/SAS-RAID_Firmware_2948G_LN_12.10.7-0001_A13_02.BIN
>
> # chmod 777 SAS-RAID_Firmware_2948G_LN_12.10.7-0001_A13_02.BIN
>
> # bash ./SAS-RAID_Firmware_2948G_LN_12.10.7-0001_A13_02.BIN --extract RAIDFW
> # cd RAIDFW/
> # ./sasdupie -u -s payload/
> <?xml version="1.0" encoding="UTF-8"?><SVMExecution lang="en"><RebootRequired>0</RebootRequired></SVMExecution>
>
> There is no “The operation was successful” and “<RebootRequired>1</RebootRequired>” as answer of the last step. So it went wrong.
>
>
> Is it possible to upgrade from the shell? How can I upgrade else?
>
> TIA
>
> Helmut Wollmersdorfer
>
>
> _______________________________________________
> Linux-PowerEdge mailing list
> [email protected]
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge

-- 
Bien cordialement, Jean-Daniel TISSOT <http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cédex

Plan et Accès <https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>

_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge