RE: Vaio Z1* and latest ACPI patches *SECOND TRY*

Mark Taylor <[email protected]>
Newsgroups gmane.linux.hardware.sony
Message-ID <[email protected]>
Are you sure it is hwclock?  I had a similar problem on my Z1A trying
to get a working 2.5.69 kernel: Everything I tried would hang very
early in the boot process, but then Brandon sent me his .config file -
starting from that I was able to compile a working kernel.  Other
things didn't work so well, so I went back to 2.4.21-rc3-laptop0.
With the 2.4.21* kernels, I've never had any problems with hanging
during boot or hwclock.  

Probably unrelated, but I mention it because it has "clock"
in the name :-)  I always disable "enhanced real time clock"
support when building a kernel - but I cant remember if I had a 
good reason.

I also have these errors in /var/log/messages:

 evevent-0286: *** Error: No installed handler for fixed event [00000000]
or:
  ACPI-0286: *** Error: No installed handler for fixed event [00000000]

they seem harmless.

Mark


> 
> How do you set --directisa on a Red Hat 9 system?  I have looked all over my
> RC files and can't even find hwclock mentioned.  Thanks.
> 
> *SECOND TRY*
> 
> I modified the boot up script /etc/rc.d/rc.sysinit to call hwclock with
> the --directisa flag but I am still experiencing a hard kernel freeze with
> the last message being 'EVEVENT-0286: *** Error: No installed handler for
> fixed even [00000000]' this message shows up twice and are the last things I
> hear from the kernel before having to reboot.  I have tried these kernels
> 2.4.21-rc8-laptop1 2.4.21-rc4-laptop0, 2.4.21 w/ latest acpi, 2.4.21-ac1 but
> met not success.
> 
> Oh and for those of you with other problems with the Z1A check out this
> site: http://www.mp3dev.org/z1a/
> 
> -Brandon
> 
> On Thu, Jun 19, 2003 at 09:44:30AM -0400, Mike Kershaw wrote:
> > With the ACPI patches on 2.4.21, hwclock get or set causes a hard hang
> with
> > no oops or panic message.
> 
> If you add the debug flag, you'll see that it hangs waiting for a clock
> tick. Using --directisa works around this.
> 
> 
> > I just tweaked my rc files not to call it anymore and I'm OK for now.
> 
> Except your clock is wrong. :)
> 
> --
> Matthew Miller           [email protected]        <http://www.mattdm.org/>
> Boston University Linux      ------>                <http://linux.bu.edu/>
>
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.