IRQ problems with PCG-GRS614MP
"Neil Blue" <[email protected]>
| Newsgroups | gmane.linux.hardware.sony |
|---|---|
| Message-ID | <000201c340e6$c0ee8a20$f901a8c0@Toppy> |
Hello, I have got my new PCG-GRS614MP, and a new bag of problems :-) I have installed RH9, and I am finding that only one PCMCIA slot works, and there is a stack of IRQ errors: Dmesg shows: Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A PCI: No IRQ known for interrupt pin B of device 00:1f.6. Real Time Clock Driver v1.10e floppy0: no floppy controllers found -- hub.c: USB hub found hub.c: 2 ports detected PCI: No IRQ known for interrupt pin C of device 00:1d.2. usb-uhci.c: found UHCI device with no IRQ assigned. check BIOS settings! usb-uhci.c: v1.275:USB Universal Host Controller Interface driver -- EXT3-fs: mounted filesystem with ordered data mode. ohci1394: $Rev: 693 $ Ben Collins <[email protected]> PCI: No IRQ known for interrupt pin C of device 02:05.2. ohci1394: Failed to allocate shared interrupt 0 SCSI subsystem driver Revision: 1.00 Has anyone else had this problem, and possibly any ideas as to what is wrong. I have tried to make changes in the BIOS, but there is very little to change in the BIOS apart form the serial, parallel and ps/2 port settings. cheers Neil