Re: linux on a vaio (John S. Andersen)

[email protected] (Indurain)
Newsgroups gmane.linux.hardware.sony
Message-ID <[email protected]>
Didn't get back at this until about now...L. Armstrong took a higher priority this week...

I looked at this website and didn't find it helpful for my sound problems:
 http://www.monkeynoodle.org/comp/vx88

I have no /dev/dsp of any kind.  No /dev/dsp, dsp0, dsp239, etc.

I have a /dev/sndstat file that hard-locks my computer when I do a 'cat' on it.

'lspci' shows:

00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 1a)
00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 1a)
00:07.4 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50)
00:07.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 Modem] (rev 30)
00:0a.0 CardBus bridge: Texas Instruments PCI1420
00:0a.1 CardBus bridge: Texas Instruments PCI1420
00:0e.0 FireWire (IEEE 1394): Texas Instruments TSB12LV26 IEEE-1394 Controller (Link)
00:10.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64)

lsmod shows:
parport_pc             25096   1 (autoclean)
lp                      8096   0 (autoclean)
parport                34176   1 (autoclean) [parport_pc lp]
nfsd                   74256   0 (autoclean)
ds                      8456   2
yenta_socket           13056   2
pcmcia_core            57184   0 [ds yenta_socket]
af_packet              14952   1 (autoclean)
sr_mod                 16920   0 (autoclean)
floppy                 55132   0
8139too                17160   1 (autoclean)
mii                     3832   0 (autoclean) [8139too]
ohci1394               19048   0 (unused)
ieee1394               45900   0 [ohci1394]
nls_cp850               4316   1 (autoclean)
vfat                   11820   1 (autoclean)
fat                    37944   0 (autoclean) [vfat]
nls_iso8859-1           3516   2 (autoclean)
ntfs                   76812   1 (autoclean)
supermount             15296   2 (autoclean)
ide-cd                 33856   0
cdrom                  31648   0 [sr_mod ide-cd]
ide-scsi               11280   0
scsi_mod              103284   2 [sr_mod ide-scsi]
usb-uhci               24652   0 (unused)
usbcore                72992   1 [usb-uhci]
rtc                     8060   0 (autoclean)
reiserfs              175120   3

If I try to just activate my sound, a /dev/dsp gets created and points to nil.

If I try to activate alsa sound, my computer locks.

All I have in my modules.conf file is:
probeall scsi_hostadapter ide-scsi
above snd-via82xx snd-pcm-oss
alias eth0 8139too
alias sound-slot-0 snd-via82xx
probeall usb-interface usb-uhci
alias ieee1394-controller ohci1394

So I have apci defaulting to off.  From my bootup:
ACPI: Subsystem revision 20030122
ACPI: Disabled via command line (acpi=off)
PCI: PCI BIOS revision 2.10 entry at 0xfd7cd, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
Applying VIA southbridge workaround.
PCI: Disabling Via external APIC routing

Then here is what my vaio laptop (FXA49) attempts to do with the via 686:
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
    ide0: BM-DMA at 0x1c40-0x1c47, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1c48-0x1c4f, BIOS settings: hdc:DMA, hdd:pio

I have devices sharing IRQ9: 
   -USB UHCI (x2)
   -OHCI-1394 1.0

But it seems my soundcard is trying to get irq10:
IRQ routing conflict for 00:07.5, have irq 5, want irq 10
                          ^^^^^^
                      location of via82cxxx_audio on bus from Mandrake
                      Control Center 9.1.

Actually, Under Mandrake Control Center 9.1, I see vt82C686 displayed under 
    the soundcard and unknowns:
     -Soundcard: VT82C686 [Apollo Super AC97/Audio]
     -Unknown/others: VT82C686 [Apollo Super AC97/Modem]
    
and both want IRQ 10, but have 5.

So......don't know what to do.

Jay
 

__________________________________________________________________
McAfee VirusScan Online from the Netscape Network.
Comprehensive protection for your entire computer. Get your free trial today!
http://channels.netscape.com/ns/computing/mcafee/index.jsp?promo=393397

Get AOL Instant Messenger 5.1 free of charge.  Download Now!
http://aim.aol.com/aimnew/Aim/register.adp?promo=380455
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.