[tlinux-users:08165] Re: Intel PRO/100 VE bad EEPROM checksum?

"Christopher R. Maden" <[email protected]>
Newsgroups gmane.linux.hardware.toshiba
Message-ID <[email protected]>
Mikkel L. Ellertson wrote:
> Does the output of "lspci -v" for the NIC look like this:

Thanks, Mikkel.  It does not look like that.

According to Windows, the Ethernet adapter is at PCI 7, and under lspci -v
looks like:

0000:07:08.0 ffff: Intel Corp.: Unknown devie 1092 (rev ff) (prog-if ff)
        !!! Unknown header type 7f

For comparison, the wireless adapter at PCI 5 says:

0000:05:00.0 Network controller: Intel Corp.: Unknown device 4222 (rev 02)
        Subsystem: Intel Corp.: Unknown device 1040
        Flags: bus master, fast devsel, latency 0, IRQ 10
        Memory at da000000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [c8] Power Management version 2
        Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
        Capabilities: [e0] #10 [0011]

The muddled output from lspci makes me more sure that there's a problem
reading the EEPROM... but I wonder how Windows works with it.

~Chris
-- 
Christopher R. Maden, Principal Consultant, crism consulting
XML-SGML-HTML-DTDs-schemas-XSL-DSSSL-conversion-training-ebooks-B2B
<URL: http://crism.maden.org/consulting/ >
PGP Fingerprint: BBA6 4085 DED0 E176 D6D4  5DFC AC52 F825 AFEC 58DA
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.