[tlinux-users:08213] Re: FW: Re: Fan control, Ubuntu 6.06

Miguel Guirao <[email protected]>
Newsgroups gmane.linux.hardware.toshiba
Message-ID <[email protected]>

Hi all,

I'm experiencing a similar problem on my Toshiba, it looks like the process
in charge not always turn on the fan, so the laptop happens to turn off
automatically. I have a dual boot, and on Windows I do not have the same
problem.

Is there a way to monitor the temp? an applet?

Best Regards,

Miguel Guirao

-----Original Message-----
From: Andy Jones [mailto:[email protected]]
Sent: Jueves, 19 de Octubre de 2006 10:52 p.m.
To: [email protected]
Subject: [tlinux-users:08212] FW: Re: Fan control, Ubuntu 6.06





Hi,
The sensors you mentioned, how do I get those working? (Toshiba has
replaced the motherboard in my tecra s1) I don't won't to boot Ubuntu
until I can have control/feedback of the temperature.


thanks

Andy Jones

-----Original Message-----
From: Paul Koufalas [mailto:[email protected]]
Sent: Thursday, 14 September 2006 6:20 PM
To: [email protected]
Subject: [tlinux-users:08149] Re: Fan control, Ubuntu 6.06

I have wondered about that. I run computer simulations on my laptop and
they can take minutes or hours to complete. I'm using GNU Octave  under
Ubuntu 5.10.

I've seen the CPU temp stay between 70-75C (via the handy sensors
applet). I put sleep() commands in my code at places in order to let the
CPU cool a bit between iterations of the simulation.

Even so, if there is a problem (bug), I can sometimes come back and find
the CPU has hit 80C. It still responds to killing the simulation
thankfully and cools itself back down to normal...50-55C.

Perhaps because my simulations are not involving the graphics card
(indeed, I blank the display rather than leave it on the funky
screensaver) I haven't had a problem with it.

Sorry to hear you fried the computer, Andy. (No doubt you this, but you
can still get your important data off it.)

Cheers
Paul.

Andy Jones wrote:

>Hi all,
>Just a quick warning regarding the temperature cutoff levels, they
allow
>the computer (tecra s1) to get too hot. Mine is now fried. I noticed it
>not running as much as windows would run it, but it did still run. The
>temp seemed a little higher. Now I think the graphics card has
>overheated.
>
>Cheers
>Andy
>
>
>
>




Este mensaje es exclusivamente para el uso de la persona o entidad a quien esta dirigido; contiene informacion estrictamente confidencial y legalmente protegida, cuya divulgacion es sancionada por la ley. Si el lector de este mensaje no es a quien esta dirigido, ni se trata del empleado o agente responsable de esta informacion, se le notifica por medio del presente, que su reproduccion y distribucion, esta estrictamente prohibida. Si Usted recibio este comunicado por error, favor de notificarlo inmediatamente al remitente y destruir el mensaje. Todas las opiniones contenidas en este mail son propias del autor del mensaje y no necesariamente coinciden con las de Radiomovil Dipsa, S.A. de C.V. o alguna de sus empresas controladas, controladoras, afiliadas y subsidiarias. Este mensaje intencionalmente no contiene acentos.

This message is for the sole use of the person or entity to whom it is being sent.  Therefore, it contains strictly confidential and legally protected material whose disclosure is subject to penalty by law.  If the person reading this message is not the one to whom it is being sent and/or is not an employee or the responsible agent for this information, this person is herein notified that any unauthorized dissemination, distribution or copying of the materials included in this facsimile is strictly prohibited.  If you received this document by mistake please notify  immediately to the subscriber and destroy the message. Any opinions contained in this e-mail are those of the author of the message and do not necessarily coincide with those of Radiomovil Dipsa, S.A. de C.V. or any of its control, controlled, affiliates and subsidiaries companies. No part of this message or attachments may b
 e used or reproduced in any manner whatsoever.
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.