[tlinux-users:08528] Re: Installing Ubuntu 7.04 Linux on Toshiba Portege M100

Hello Oswaldo,

thanks for your answer.

I have Toshiba Tecra 8200 before, and for the modem I use slmodem driver 
to access it.
and it's work.
I use Fedora Core 2.

I use it, until 2 weeks ago my laptop was stealed.

In my used Tecra 8200, I cannot access IR too, because there is no 
reference on internet,
but in this Portege M100, I was found the hardware reference on 
internet, but still I cannot config my infra red.

maybe there is someone else who can solve my prolem ?

many thanks before.

=================================
Beli mainan/anting di pasar murah,
Mau domain/Hosting, di GUA aja !!!
=================================

Best Regards,
Stefanus Wardoyo
+62-81-23571431
+62-31-70598579
Mail me at:
   [email protected]
   [email protected]
---------
GOD BLESS
---------



Oswaldo Bellido wrote:
> Hello Stefanus,
>
> I have Ubuntu 7.04 installed in my Toshiba Tecra A6. However, I haven't
> tested my modem, just because I have network connections at home and at
> work.
>
> I did have modem issues about a year ago, when I used to run Puppy Linux
> 2.11 in a previous computer I had. It did recognize my soft modem, but when
> I tried the GUI front end for wvdial, it wouldn't work. I had to open a
> terminal session and configure it manually (with a little help from the
> Puppy files) and that did the trick.
>
> Since we're talking Ubuntu in Toshibas, I'd like to tell you all what I've
> found so far:
>
> SATA HD: OK
> DVD READ: OK
> CD Write: OK
> USB Sticks: OK
> Palm Synchro: OK!
> Panasonic DMC-LS70 camera: didn't work at first, then updated my system,
> then it did work, then I tried to install webcam drivers, now it doesn't
> work again.
> 5-in-1 media reader: Doesn't work. Ubuntu recognized it when I booted my
> system with my SD card inserted, but I don't think that's the way it should
> work.
> D-Link webcam: Doesn't work. I tried three different programs from the
> Ubuntu repositories (using Synaptic), none worked.
> HP printers: OK
> Lexmark 1270 multifunction printer: not tested yet. However, I've read
> there's a driver that can let me print, but nothing to let me scan with this
> model.
>
>
> Warmest greetings from Peru,
>
>
> Oswaldo Bellido
>
>
> -----Mensaje original-----
> De: Stefanus Wardoyo [mailto:[email protected]] 
> Enviado el: Martes, 19 de Junio de 2007 07:46 a.m.
> Para: [email protected]
> Asunto: [tlinux-users:08523] Installing Ubuntu 7.04 Linux on Toshiba Portege
> M100
>
> Dear all,
>
> I have been installed my Toshiba Portege M100 with Ubuntu 7.04.
> Everything going well,
> but, there is several devices that I cannot use until now.
>
> 1. Modem
> 2. Infrared
>
> when i run scanModem tools from linmodem, it says that the suitable 
> driver for this Toshiba Portege M100 is slmodemd.
> I try to install it via Synaptic, from Ubuntu DVD Repository.
> It's running well when I run
> root@DreamLaptop:~# /usr/sbin/slmodemd --alsa -c INDONESIA modem:1
> SmartLink Soft Modem: version 2.9.9e-pre1 Mar 20 2007 14:45:09
> symbolic link `/dev/ttySL0' -> `/dev/pts/0' created.
> modem `modem:1' created. TTY is `/dev/pts/0'
> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>
> and, when I run wvdialconf, the modem is respond well.
> ttySL0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
> ttySL0<*1>: ATQ0 V1 E1 -- OK
> ttySL0<*1>: ATQ0 V1 E1 Z -- OK
> ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK
> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
> ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem
> ttySL0<*1>: Speed 19200: AT -- OK
> ttySL0<*1>: Speed 38400: AT -- OK
> ttySL0<*1>: Speed 57600: AT -- OK
> ttySL0<*1>: Speed 115200: AT -- OK
> ttySL0<*1>: Speed 230400: AT -- OK
> ttySL0<*1>: Speed 460800: AT -- OK
> ttySL0<*1>: Max speed is 460800; that should be safe.
> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>
> Found a modem on /dev/ttySL0.
>
> but, when I try to connect to internet, the modem is not responding, and 
> it's not dialling.
>
> can you give me the solution please ??
>
> and if you have information about the infrared, please tell me.
> I found information about Toshiba Portege M100 on smc-init website, but 
> still I cannot config my infrared
>
> please help me.....
>
>