[tlinux-users:08817] Re: TOSHIBA L40 REALTEK 8187B WLAN USB2 problem
"Christopher George" <[email protected]> Sat, 26 Jan 2008 10:58:01 +0000
| Newsgroups | gmane.linux.hardware.toshiba |
|---|---|
| Message-ID | <[email protected]> |
------=_Part_3293_29151744.1201345081535 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline well to be honest i don`t really know why i couldn`t install the latest version of ndiswrapper but i could not. only managed it with a help of my friends who was connected to the laptop and did it himself. anyway, now there is ndiswrapper v1.51 installed but still can`t connect to my router although iwconfig can see it. On Jan 25, 2008 10:51 PM, Ekim Maurer-Engin <[email protected]> wrote: > regarding ndiswrapper website - you need to have 1.48 at least... where > is the problem with isntalling it via tar.gz ? > > On Fr, 2008-01-25 at 21:22 +0000, Christopher George wrote: > > guys it doesn`t want to work at all. :( tried everything stil no > > positive result > > > > On Jan 24, 2008 5:04 PM, Christopher George <[email protected]> > > wrote: > > hi > > > > i am using WEP 64bit encryption. > > > > my ssid is broadcasted. > > > > just installed the driver with ndiswrapper for the rtl8187b > > and apart from that I cannot connect to my network everything > > seems to be fine. network manager can see my ssid, iwconfig > > can as well but the laptop doesn`t connect. > > > > but for a reason I cannot install any newer versions of > > ndiswrapper than 1.45 :( > > > > any ideas? > > > > > > > > On Jan 24, 2008 4:55 PM, Helio Miguel Silveira Filho > > <[email protected]> wrote: > > OK, I'm not exactly an experienced user, but I think > > that we should check if the problem is anywhere else, > > different than ndiswrapper. > > > > Maybe more details about the wireless network > > configuration should help. So, how is it configured? > > Is it by any chance hidden? It's known that > > network-manager has problems with hidden networks (or > > at least it had recently). In this case, maybe > > changing NM to Wicd or Wifi-Radar could help. > > > > What is the security protocol that you're using? WEP, > > WPA, none? > > > > > > > > On Jan 24, 2008 9:11 AM, Christopher George > > <[email protected]> wrote: > > okay problem is I can`t install ndiswrapper > > from other source than the package manager > > which only gives me v1.45. > > > > anyway just have a fresh installation of the > > cd version of ubuntu v7.10 and will try to fix > > the wlan again. > > > > > > > > On Jan 23, 2008 7:36 PM, Ekim Maurer-Engin > > <[email protected]> wrote: > > you definatly need ndiswrapper 1.49 at > > least - 1.5x suggested > > > > I have no knowledge about ubuntu - but > > with me there are only the 3 > > lines in /etc/modprobe.d/ndiswrapper i > > wrote in previous mail > > > > On Mi, 2008-01-23 at 17:34 +0000, > > Christopher George wrote: > > > guys i still have problems :( > > > > > > i did everything as ekim said and > > got a few error messages. > > > > > > e.g. > > > tom@tom-laptop:~$ ndiswrapper -l > > > WARNING: /etc/modprobe.d/ndiswrapper > > line 3: ignoring bad line > > > starting with 'original' > > > WARNING: /etc/modprobe.d/ndiswrapper > > line 6: ignoring bad line > > > starting with 'modified' > > > net8187b : driver installed > > > device (0BDA:8197) present > > > net8187b.net : invalid driver! > > > tom@tom-laptop:~$ > > > > > > plus the version of ndiswrapper i > > can get through package manager is > > > 1.45 > > > > > > tom@tom-laptop:~$ ndiswrapper -v > > > utils version: 1.9 > > > driver > > > filename: > > > /lib/modules/2.6.22-14-generic/ubuntu/misc/ndiswrapper/ndiswrapper.ko > > > version: 1.45 > > > vermagic: 2.6.22-14-generic > > SMP mod_unload 586 > > > tom@tom-laptop:~$ > > > > > > this is my lsusb: > > > > > > tom@tom-laptop:~$ lsusb > > > Bus 007 Device 001: ID 0000:0000 > > > Bus 006 Device 002: ID 0bda:8197 > > Realtek Semiconductor Corp. > > > Bus 006 Device 001: ID 0000:0000 > > > Bus 002 Device 001: ID 0000:0000 > > > Bus 005 Device 001: ID 0000:0000 > > > Bus 001 Device 001: ID 0000:0000 > > > Bus 003 Device 001: ID 0000:0000 > > > Bus 004 Device 001: ID 0000:0000 > > > tom@tom-laptop:~$ > > > > > > > > > so i cannot understand what can be > > wrong. i used the win98 driver for > > > the rtl8187b wlan stick and still > > nothing. > > > > > > network manager shows that i can > > connect to my network but it doesn`t > > > hand out any ip to the > > laptop :( although my wlan is assigned > > to > > > wlan0 > > > > > > wireless roaming mode is enabled. > > > > > > help please. :) > > > > > > > > > On Jan 23, 2008 5:14 PM, Thomas > > Lopes < [email protected]> wrote: > > > In Ubuntu you won't need to > > download and make a ndiswrapper. > > > You can download it with > > synaptic. But you need to configure > > > it to use your driver, and > > blacklist the old ones (if > > > there's). > > > > > > > > > 2008/1/23, Ekim Maurer-Engin > > < [email protected]>: > > > > > > I am not sure how > > ubuntu handles it - therefore here a > > > more global > > > instruction. I made > > my card work with this (actually i > > > am using it right > > > now :P). > > > > > > you need ndiswrapper > > 1.50 or higher (I use 1.51) - > > > obtainable via > > > > > > http://ndiswrapper.sourceforge.net/joomla/ > > > or the direct link > > to the tar.gz: > > > > > > > > http://sourceforge.net/project/downloading.php?group_id=3D93482&amp;u= se_mirror=3Dkent&amp;filename=3Dndiswrapper-1.51.tar.gz&amp;6716086= 2 > > > > > > > > untar - configure - > > make - make install (or use the > > > package manager of > > > your choice if this > > packages are present for your > > > Linux distribution. > > > > > > get the realtek > > 8187B drivers only > > > > > > ftp://202.65.194.212/cn/wlan/RTL8187B_driver_only.zip > > > > > > unzip this > > > > > > erease all > > ndiswrapper entries regarding card > > > root@camelot:~> > > ndiswrapper -l > > > net8187b : > > [somemassage] > > > root@camelot:~> > > ndiswrapper -r net8187b > > > > > > reboot for a clean > > system (yes it can be done without > > > - but no risk is > > > better) > > > > > > talesin@camelot :~> > > lsusb > > > > > > search for the > > devicenumber of your WLAN card, most > > > probably this will > > > show so: > > > > > > Bus 003 Device 002: > > ID 0bda:8197 Realtek Semiconductor > > > Corp. > > > > > > then get root and > > > > > > root@camelot:~> > > ndiswrapper -i > > > > > <path_to_win98_drivers>/net8187b.inf > > > > > > root@camelot:~> > > ndiswrapper -a <device_id> net8187b > > > In my case it was: > > > root@camelot:~> > > ndiswrapper -a 0bda:8197 net8187b > > > > > > root@camelot:~> > > ndiswrapper -m > > > root@camelot :~> > > modprobe ndiswrapper > > > > > > reboot (maybe it is > > possible without - but am just > > > typing how i did it) > > > > > > during boot you > > should see this: > > > ndiswrapper: driver > > net8187b (Realtek Semiconductor > > > > > Corp.,07/18/2007,5.1097.0718.2007) > > loaded > > > wlan0: ethernet > > device 00:16:44:1d:39:84 using NDIS > > > driver: net8187b, > > > version: 0x1, NDIS > > version: 0x500, vendor: 'NDIS > > > Network Adapter', > > > 0BDA:8197.F.conf > > > wlan0: encryption > > modes supported: WEP; TKIP with WPA, > > > WPA2, WPA2PSK; > > > AES/CCMP with WPA, > > WPA2, WPA2PSK > > > usbcore: registered > > new interface driver ndiswrapper > > > > > > when logged in > > again > > > > > > talesin@camelot:~> > > ndiswrapper -l > > > net8187b : driver > > installed > > > device > > (0BDA:8197) present (alternate driver: > > > r8187) > > > > > > do the foloowing > > only if this does not show up: > > > > > > Look at > > your /etc/modprobe.d/ndiswrapper > > > > > > you will see a > > single line, > > > clone this line and > > modify the structre as follows: > > > > > > > > original /etc/modprobe.d/ndiswrapper: > > > alias > > usb:v0BDAp8187d*dc*dsc*dp*ic*isc*ip* > > ndiswrapper > > > > > > > > modified /etc/modprobe.d/ndiswrapper: > > > alias > > usb:v0BDAp8187d*dc*dsc*dp*ic*isc*ip* > > ndiswrapper > > > alias > > usb:v0BDAp8189d*dc*dsc*dp*ic*isc*ip* > > > ndiswrapper > > > alias > > usb:v0BDAp8197d*dc*dsc*dp*ic*isc*ip* > > ndiswrapper > > > > > > mainly you just > > clone and add the other known ids of > > > the card which > > > are 8187,8189,8197 > > > > > > now reboot again > > > > > > now you will see the > > ndismod -l output as it should > > > be. > > > > > > With my experiance > > NetworkManager can handle the card > > > (at least under > > > KDE). > > > > > > Thereis a minor > > stability bug i encounter - the > > > connection breaks up > > after a while of inactivity - I > > > plainly run a ping > > <mygatewayip> >/dev/null in > > > background > > > system up for 24h > > without connectivity loss. > > > > > > if any further > > questions feel free to ask again ;-) > > > > > > Cheers > > > Ekim > > > -- > > > Ekim Engin > > <mailto:[email protected] > > > > > > > Cell: +90 (532) 602 > > 59 41 > > > MSN: > > [email protected] | ICQ#: 198501695 > > > > > > QOTD: San Francisco > > isn't what it used to be, and it > > > never was. > > > -- > > Herb Caen > > > > > > > > > > > > > > > > > > -- > > > > > > > > > Thomas Lopes - 1171110247 > > > http://www.TRC-Design.com - > > "Sua presen=E7a na web =E9 da nossa > > > conta" > > > http://www.THLopes.com - ">> > > Escrever =3D Ociosidade_Atarefada;" > > > MSN: [email protected] > > > > > -- > > Ekim Engin > > <mailto:[email protected] > > > > > Cell: +90 (532) 602 59 41 > > MSN: [email protected] | ICQ#: > > 198501695 > > > > > > QOTD: "I've seen better heads on half > > a pint of beer." > > > > > > > > > > > > > > > -- > Ekim Engin <mailto:[email protected]> > > Cell: +90 (532) 602 59 41 > MSN: [email protected] | ICQ#: 198501695 > > QOTD: Court, n.: > A place where they dispense with justice. > -- Arthur Train > > > ------=_Part_3293_29151744.1201345081535 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline well to be honest i don`t really know why i couldn`t install the latest ver= sion of ndiswrapper but i could not. only managed it with a help of my frie= nds who was connected to the laptop and did it himself.<br><br>anyway, now = there is ndiswrapper v1.51 installed but still can`t connect to my router a= lthough iwconfig can see it.<br> <br><div class=3D"gmail_quote">On Jan 25, 2008 10:51 PM, Ekim Maurer-Engin = <<a href=3D"mailto:[email protected]">[email protected]</a>> wr= ote:<br><blockquote class=3D"gmail_quote" style=3D"border-left: 1px solid r= gb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"> regarding ndiswrapper website - you need to have 1.48 at least... where<br>= is the problem with isntalling it via tar.gz ?<br><div><div></div><div clas= s=3D"Wj3C7c"><br>On Fr, 2008-01-25 at 21:22 +0000, Christopher George wrote= :<br> > guys it doesn`t want to work at all. :( tried everything stil no<br>&g= t; positive result<br>><br>> On Jan 24, 2008 5:04 PM, Christopher Geo= rge <<a href=3D"mailto:[email protected]">[email protected]</a>><br= > > wrote:<br>> hi<br>><br>> &= nbsp; i am using WEP 64bit encryption.<br>><br>> = my ssid is broadcasted.<br>><br>> = just installed the driver with ndiswrapper for the rtl8187b<= br> > and apart from that I cannot connect to my= network everything<br>> seems to be fine. n= etwork manager can see my ssid, iwconfig<br>>  = ; can as well but the laptop doesn`t connect.<br>><br> > but for a reason I cannot install any newe= r versions of<br>> ndiswrapper than 1.45 :(<= br>><br>> any ideas?<br>><br>><br>&= gt;<br>> On Jan 24, 2008 4:55 PM, Helio Migu= el Silveira Filho<br> > <<a href=3D"mailto:[email protected]">= [email protected]</a>> wrote:<br>>  = ; OK, I'm not exactly an experienced user, but I t= hink<br>> that w= e should check if the problem is anywhere else,<br> > different than= ndiswrapper.<br>><br>> &nb= sp; Maybe more details about the wireless network<br>> &nb= sp; configuration should help. So= , how is it configured?<br>> &= nbsp; Is it by any chance hidden? It's known that<br> > network-manage= r has problems with hidden networks (or<br>> = at least it had recently). In this case, maybe= <br>> changing N= M to Wicd or Wifi-Radar could help.<br>><br> > What is the se= curity protocol that you're using? WEP,<br>> &n= bsp; WPA, none?<br>><br>><br>><br>>= On Jan 24, 2008 9:= 11 AM, Christopher George<br>> = <<a href=3D"mailto:[email protected]">[email protected]= </a>> wrote:<br> > = okay problem is I can`t install ndiswrapper<br>> &n= bsp; = from other source than the package manager<br>> &nb= sp; which only give= s me v1.45.<br>><br>>  = ; anyway just have a fresh installation = of the<br> > = cd version of ubuntu v7.10 and will try to fix<br>> = &nbs= p; the wlan again.<br>><br>><br>><br>> &nb= sp; On Jan 23, 2008= 7:36 PM, Ekim Maurer-Engin<br> > = <<a href=3D"mailto:[email protected]">talesin@talesoft.= net</a>> wrote:<br>> = you definat= ly need ndiswrapper 1.49 at<br>> &nbs= p; le= ast - 1.5x suggested<br> ><br>> = I have no knowledge about= ubuntu - but<br>> &nbs= p; with me there ar= e only the 3<br>>  = ; lines in /etc/mod= probe.d/ndiswrapper i<br> > = wrote in previous mail<br>><br= >> = On Mi, 2008-01-23 at 17:34 +0000= ,<br>> &n= bsp; Christopher George wrote:<br= >> = > guys i still have problems = :(<br> > = ><br>> = &nbs= p; > i did everything as ekim said and<br>> &nbs= p; &n= bsp; got a few error messages.<br>> &= nbsp; = ><br> > = > e.g.<br>> &= nbsp; = > tom@tom-laptop:~$ ndiswrapper -l<br>> =  = ; > WARNING: /etc/modprobe.d/ndiswrapper<br>= > = line 3: ignoring bad line<br> > = > starting with 'original&= #39;<br>> = > WARNING: /etc/modpro= be.d/ndiswrapper<br>> &= nbsp; line 6: ignor= ing bad line<br> > = > starting with 'modified&= #39;<br>> = > net8187b : driver in= stalled<br>> &nb= sp; > &nb= sp; device (0BDA:8197) present<br> > = > <a href=3D"http://net8187b.n= et" target=3D"_blank">net8187b.net</a> : invalid driver!<br>> &nb= sp; &= nbsp; > tom@tom-laptop:~$<br>> &nb= sp; &= nbsp; ><br> > = > plus the version of ndiswrap= per i<br>>  = ; can get through package = manager is<br>> = > 1.45<br>> &= nbsp; = ><br> > = > tom@tom-laptop:~$ ndiswrappe= r -v<br>> = > utils version: 1.9<b= r>>  = ; > driver<br>> &nbs= p; &n= bsp; > filename:<br> > = /lib/modules/2.6.22-14-gen= eric/ubuntu/misc/ndiswrapper/ndiswrapper.ko<br>> &n= bsp; = > version: 1.45<br>> = &nbs= p; > vermagic: 2.6.22-1= 4-generic<br> > = SMP mod_unload 586<br>> = &nbs= p; > tom@tom-laptop:~$<br>> = &nbs= p; ><br>> &nb= sp; &= gt; this is my lsusb:<br> > = ><br>> = &nbs= p; > tom@tom-laptop:~$ lsusb<br>> =  = ; > Bus 007 Device 001: ID 0000:0000<br>> = &nbs= p; > Bus 006 Device 002: ID 0bda:8197<br> > = Realtek Semiconductor Corp.<br>&g= t; &n= bsp; > Bus 006 Device 001: ID 0000:00= 00<br>> &= nbsp; > Bus 002 Device 001: ID= 0000:0000<br> > = > Bus 005 Device 001: ID 0000:= 0000<br>> = > Bus 001 Device 001: = ID 0000:0000<br>>  = ; > Bus 003 Devi= ce 001: ID 0000:0000<br> > = > Bus 004 Device 001: ID 0000:= 0000<br>> = > tom@tom-laptop:~$<br= >> = ><br>>  = ; &nb= sp; ><br> > = > so i cannot understand what = can be<br>> &nbs= p; wrong. i used the win98= driver for<br>> = > the rtl8187b = wlan stick and still<br> > = nothing.<br>> &n= bsp; = ><br>> = >= network manager shows that i can<br>>  = ; &nb= sp; connect to my network but it doesn`t<br> > = > hand out any ip to the<br>&g= t; &n= bsp; laptop :( although my wlan is assig= ned<br>> = to<br>> &= nbsp; = > wlan0<br> > = ><br>> = &nbs= p; > wireless roaming mode is enabled.<br>> &nbs= p; &n= bsp; ><br>> &= nbsp; = > help please. :)<br> > = ><br>> = &nbs= p; ><br>> &nb= sp; > On = Jan 23, 2008 5:14 PM, Thomas<br>> &nb= sp; L= opes < <a href=3D"mailto:[email protected]">[email protected]</a>> = wrote:<br> > = > = In Ubuntu you won't need to<br>> =  = ; download and make a ndiswrapper.<br>> &nbs= p; &n= bsp; > You can download it with<br> > = synaptic. But you need to configu= re<br>> &= nbsp; > &= nbsp; it to use your driver, and<br>> = &nbs= p; blacklist the old ones (if<br> > = > = there's).<br>> &nbs= p; ><br>> &nb= sp; &= nbsp; ><br>> =  = ; > 2008/1/23, Ekim Maurer-Engin<br> > = < <a href=3D"mailto:talesin@ta= lesoft.net">[email protected]</a>>:<br>> &nbs= p; &n= bsp; ><br>> &= nbsp; > &= nbsp; I am not sure how<br> > = ubuntu handles it - therefore her= e a<br>> = > = more global<br>> = &nbs= p; > &nbs= p; instruction. I made<br> > = my card work with this (actually = i<br>> &n= bsp; > &n= bsp; am using it right<br>> &n= bsp; = > = now :P).<br> > = ><br>> = &nbs= p; > &nbs= p; you need ndiswrapper<br>> &= nbsp; 1.50 o= r higher (I use 1.51) -<br>> &= nbsp; > &= nbsp; obtainable via<br> > = ><br>> = &nbs= p; <a href=3D"http://ndiswrapper.sourceforge.net/joomla/" tar= get=3D"_blank">http://ndiswrapper.sourceforge.net/joomla/</a><br>>  = ; &nb= sp; > &nb= sp; or the direct link<br> > = to the tar.gz:<br>><br>> &n= bsp; = ><br></div></div>> &= nbsp; = <a href=3D"http://sourceforge.net/project/downloading= .php?group_id=3D93482&amp;amp;use_mirror=3Dkent&amp;amp;filename=3D= ndiswrapper-1.51.tar.gz&amp;amp;67160862" target=3D"_blank">http://sour= ceforge.net/project/downloading.php?group_id=3D93482&amp;amp;use_mirror= =3Dkent&amp;amp;filename=3Dndiswrapper-1.51.tar.gz&amp;amp;67160862= </a><br> <div><div></div><div class=3D"Wj3C7c">><br>> &nb= sp; &= nbsp; ><br>> = > = untar - configure -<br>>= ; &nb= sp; make - make install (or use the<br> > = > = package manager of<br>> = &nbs= p; > &nbs= p; your choice if this<br>> &n= bsp; package= s are present for your<br> > = > = Linux distribution.<br>>  = ; &nb= sp; ><br>> &n= bsp; > &n= bsp; get the realtek<br>&g= t; &n= bsp; 8187B drivers only<br> > = ><br>> = &nbs= p; <a href=3D"ftp://202.65.194.212/cn/wlan/RTL8187B_driver_on= ly.zip" target=3D"_blank">ftp://202.65.194.212/cn/wlan/RTL8187B_driver_only= .zip</a><br> > = ><br>> = &nbs= p; > &nbs= p; unzip this<br>> &nbs= p; ><br>> &nb= sp; &= nbsp; > &= nbsp; erease all<br> > = ndiswrapper entries regarding car= d<br>> &n= bsp; > &n= bsp; root@camelot:~><br>> &= nbsp; = ndiswrapper -l<br>> &nb= sp; &= nbsp; > n= et8187b :<br> > = [somemassage]<br>> &nbs= p; &n= bsp; > &n= bsp; root@camelot:~><br>> &= nbsp; = ndiswrapper -r net8187b<br>> &= nbsp; = ><br> > = > = reboot for a clean<br>> = &nbs= p; system (yes it can be done without<br>> &= nbsp; = > = - but no risk is<br> > = > = better)<br>> &nb= sp; &= nbsp; ><br>> = > = talesin@camelot :~><br>> &n= bsp; = lsusb<br> > = ><br>> = &nbs= p; > &nbs= p; search for the<br>> = devicenumber= of your WLAN card, most<br>> = > = probably this will<= br> > = > = show so:<br>> &n= bsp; = ><br>> = > = Bus 003 Device 002:<br>> &nbs= p; &n= bsp; ID 0bda:8197 Realtek Semiconductor<br> > = > = Corp.<br>>  = ; &nb= sp; ><br>> &n= bsp; > &n= bsp; then get root and<br>> &n= bsp; = ><br> > = > = root@camelot:~><br>> = &nbs= p; ndiswrapper -i<br>> =  = ; ><br>> &nbs= p; <path_to_win98_drive= rs>/net8187b.inf<br> > = ><br>> = &nbs= p; > &nbs= p; root@camelot:~><br>> &nb= sp; ndiswrap= per -a <device_id> net8187b<br>> = &nbs= p; > In m= y case it was:<br> > = > = root@camelot:~><br>> = &nbs= p; ndiswrapper -a 0bda:8197 net8187b<br>> &n= bsp; = ><br>> = >= root@camelot:~>= <br> > = ndiswrapper -m<br>> &nb= sp; &= nbsp; > &= nbsp; root@camelot :~><br>> = &nbs= p; modprobe ndiswrapper<br>> &= nbsp; ><b= r> > = > = reboot (maybe it is<br>>  = ; &nb= sp; possible without - but am just<br>>  = ; &nb= sp; > &nb= sp; typing how i did it)<br> > = ><br>> = &nbs= p; > &nbs= p; during boot you<br>> = should see = this:<br>>  = ; >  = ; ndiswrapper: driver<br> > = net8187b (Realtek Semiconductor<b= r>>  = ; ><br>> &nbs= p; &n= bsp; Corp.,07/18/2007,5.1097.0718.2007)<br>> = &nbs= p; loaded<br> > = > = wlan0: ethernet<br>> &n= bsp; = device 00:16:44:1d:39:84 using NDIS<br>> &nb= sp; &= nbsp; > &= nbsp; driver: net8187b,<br> > = > = version: 0x1, NDIS<br>> = &nbs= p; version: 0x500, vendor: 'NDIS<br>> &n= bsp; = > = Network Adapter',<br> > = > = 0BDA:8197.F.conf<br>> &= nbsp; = > = wlan0: encryption<br>> = modes suppo= rted: WEP; TKIP with WPA,<br> > = > = WPA2, WPA2PSK;<br>> &nb= sp; &= nbsp; > A= ES/CCMP with WPA,<br>> = WPA2, WPA2PS= K<br>> &n= bsp; > &n= bsp; usbcore: registered<br> > = new interface driver ndiswrapper<= br>> &nbs= p; ><br>> &nb= sp; &= nbsp; > &= nbsp; when logged in<br>> &nbs= p; again<br> > = ><br>> = &nbs= p; > &nbs= p; talesin@camelot:~><br>> = ndisw= rapper -l<br>> &= nbsp; > &= nbsp; net8187b : driver<br> > = installed<br>> &= nbsp; = > = device<br>> &nb= sp; &= nbsp; (0BDA:8197) present (alternate driver:<br>> &= nbsp; = > = r8187)<br> > = ><br>> = &nbs= p; > &nbs= p; do the foloowing<br>>  = ; only if th= is does not show up:<br>> &nbs= p; ><br> > = > = Look at<br>> &nb= sp; &= nbsp; your /etc/modprobe.d/ndiswrapper<br>> =  = ; ><br>> &nbs= p; > &nbs= p; you will see a<br> > = single line,<br>>  = ; &nb= sp; > &nb= sp; clone this line and<br>> &= nbsp; = modify the structre as follows:<br>> = &nbs= p; ><br> > = ><br>> = &nbs= p; original /etc/modprobe.d/ndiswrapper:<br>>  = ; &nb= sp; > &nb= sp; alias<br>> &= nbsp; usb:v0BDAp818= 7d*dc*dsc*dp*ic*isc*ip*<br> > = ndiswrapper<br>> = &nbs= p; ><br>> &nb= sp; &= gt;<br>> = modified /etc/modprobe.d/n= diswrapper:<br>> = > = alias<br> > = usb:v0BDAp8187d*dc*dsc*dp*ic*isc*= ip*<br>> = ndiswrapper<br>> = &nbs= p; > &nbs= p; alias<br>> &n= bsp; usb:v0B= DAp8189d*dc*dsc*dp*ic*isc*ip*<br> > = > = ndiswrapper<br>> = &nbs= p; > alia= s<br>> &n= bsp; usb:v0BDAp8197d*dc*dsc*dp*ic= *isc*ip*<br>> &n= bsp; ndiswrapper<br> > = ><br>> = &nbs= p; > &nbs= p; mainly you just<br>> = clone and a= dd the other known ids of<br>> = >= the card which<br> > = > = are 8187,8189,8197<br>> = &nbs= p; ><br>> &nb= sp; > &nb= sp; now reboot again<br>&g= t; &n= bsp; ><br> > = > = now you will see the<br>> &nbs= p; &n= bsp; ndismod -l output as it should<br>> &nb= sp; &= nbsp; > &= nbsp; be.<br>> &= nbsp; ><br> > = > = With my experiance<br>> = &nbs= p; NetworkManager can handle the card<br>> &= nbsp; = > = (at least under<br> > = > = KDE).<br>>  = ; &nb= sp; ><br>> &n= bsp; > &n= bsp; Thereis a minor<br>> &nbs= p; &n= bsp; stability bug i encounter - the<br> > = > = connection breaks up<br>> &nbs= p; &n= bsp; after a while of inactivity - I<br>> &n= bsp; = > = plainly run a ping<br> > = <mygatewayip> >/dev/null= in<br>> = > = background<br>> =  = ; >  = ; system up for 24h<br> > = without connectivity loss.<br>>= ; &nb= sp; ><br>> &n= bsp; = > = if any further<br>> &nb= sp; questions feel = free to ask again ;-)<br> > = ><br>> = &nbs= p; > &nbs= p; Cheers<br>> &= nbsp; > &= nbsp; Ekim<br>> =  = ; >  = ; --<br> > = > = Ekim Engin<br>> =  = ; <mailto:<a href=3D"mailto:[email protected]">talesin@talesof= t.net</a> ><br>> &nb= sp; ><br> > = > = Cell: +90 (532) 602<br>>  = ; &nb= sp; 59 41<br>> &= nbsp; > &= nbsp; MSN:<br>> =  = ; <a href=3D"mailto:[email protected]">tales= [email protected]</a> | ICQ#: 198501695<br> > = ><br>> = &nbs= p; > &nbs= p; QOTD: San Francisco<br>> &n= bsp; isn'= ;t what it used to be, and it<br>> &n= bsp; = > never was.<br> > = > =  = ; --<br>> = Herb Caen<br>> =  = ; ><br>> &nbs= p; &n= bsp; ><br>> &= nbsp; ><br> > = ><br>> = &nbs= p; ><br>> &nb= sp; > &nb= sp; --<br>> &nbs= p; &g= t;<br>> &= nbsp; ><br> > = > = Thomas Lopes - 1171110247<br>> = >= <a href=3D"http://www.TRC-Design.com" target= =3D"_blank">http://www.TRC-Design.com</a> -<br>> &n= bsp; = "Sua presen=E7a na web =E9 da nossa<br> > = > = conta"<br>> = > = <a href=3D"http://www.THLopes.com" target=3D"_blank">http://= www.THLopes.com</a> - ">><br>> &n= bsp; = Escrever =3D Ociosidade_Atarefada;"<br> > = > = MSN: <a href=3D"mailto:[email protected]">[email protected]</a><br>= > = ><br>> = &nbs= p; --<br>>  = ; Ekim Engin= <br> > = <mailto:<a href=3D"mailto:tale= [email protected]">[email protected]</a> ><br>><br>> &nbs= p; &n= bsp; Cell: +90 (532) 602 59 41<br>> &= nbsp; = MSN: <a href=3D"mailto:[email protected]">talesin@= talesoft.net</a> | ICQ#:<br> > = 198501695<br>><br>><br>>= &nbs= p; QOTD: "I've seen better head= s on half<br>> &= nbsp; a pint of beer."= ;<br>><br> ><br>><br>><br>><br>><br>><br>--<br>Ekim Engin <mailto= :<a href=3D"mailto:[email protected]">[email protected]</a>><br><b= r>Cell: +90 (532) 602 59 41<br>MSN: <a href=3D"mailto:[email protected]"= >[email protected]</a> | ICQ#: 198501695<br> <br></div></div>QOTD: Court, n.:<br> A place whe= re they dispense with justice.<br>  = ; -- Arthur Train<br><br><br></blockquote></div><br> ------=_Part_3293_29151744.1201345081535--