ipvsadm :- Getting real server weight as “0” : Cannot access the real server home page

Hi 
   Thanks  Andersson , for clearing the doubts 
I had started trying out the configurations from the
url 
http://www.ultramonkey.org/3/topologies/ha-lb-eg.html 
   Since I am just starting , I thought  I will try to
cluster only port 80 
   Commands “ip addr sh” shows results simillar to the
documents , 

ldirectord status shows as
# /etc/ha.d/resource.d/ldirectord ldirectord.cf status
ldirectord for /etc/ha.d/ldirectord.cf is running with
pid: 2445
             
                      But my   “ipvsadm -L -n “ 
results  shows some problem . It  gives the weight as
0 for the real servers 

     [root@Director-ONE ha.d]# ipvsadm -L -n
IP Virtual Server version 1.2.0 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight
ActiveConn InActConn
TCP  192.168.6.240:80 rr
  -> 192.168.7.5:80               Masq    0      0    
     0
  -> 192.168.7.4:80               Masq    0      0    
     0
  -> 127.0.0.1:80                 Local   1      0    
     0

      Also , my http request is not redirected to the
real server , I get the “Director-Machine “  web pages
only 
        Please let me know , what all other parameters
I have to check . I am using CentOS ( 2.6.9-34) .   
Guidance requested . The configurations details are
given below 
                         Thanks         
                              Joseph John 


I have two Linux -Directors  and Two Real Servers 
*****************************************
Linux Director – One  has IP 
	Eth0  => 192.168.6.2
	Eth1  => 192.168.7.2
Linux Director – TWO has IP 
	Eth0  => 192.168.6.3
	Eth1  =>  192.168.7.3
*******
I have iptables set on my Linux Director and the
listing shows

[root@Director-ONE ha.d]# iptables -L -n -t nat
Chain PREROUTING (policy ACCEPT)
target     prot opt source               destination

Chain POSTROUTING (policy ACCEPT)
target     prot opt source               destination
MASQUERADE  all  --  192.168.7.0/24       0.0.0.0/0

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination

*****************************************
And my Real Servers  have 

Real Server One 
             Eth0 => 192.168.7.4
Real Server Two
             Eth1 => 192.168.7.5
*********************************
in My Linux Directors I have the following
configurations

   cat /etc/ha.d/ha.cf
debugfile /var/log/ha-debug
logfile /var/log/ha-log
logfacility     local0
mcast eth0 225.0.0.1 694 1 0
mcast eth1 225.0.0.1 694 1 0
auto_failback off
node    Real-One.cluster
node    Real-Two.cluster
node    Director-ONE.cluster
node    Director-TWO.cluster
respawn hacluster /usr/lib/heartbeat/ipfail
apiauth ipfail gid=haclient uid=hacluster

**********
 cat /etc/ha.d/haresources

Real-One.cluster \
        LVSSyncDaemonSwap::master \
        ldirectord::ldirectord.cf \
        IPaddr2::192.168.6.240/24/eth0 \
        IPaddr2::192.168.7.240/24/eth1

**********
 cat /etc/ha.d/ldirectord.cf

checktimeout=10
checkinterval=2
autoreload=no
logfile="/var/log/ldirectord.log"
logfile="local0"
quiescent=yes

virtual=192.168.6.240:80
        fallback=127.0.0.1:80
        real=192.168.7.4:80 masq
        real=192.168.7.5:80 masq
        service=http
        request="index.html"
        receive="Test Page"
        scheduler=rr
        #persistent=600
        protocol=tcp
        checktype=negotiate



		
___________________________________________________________ 
Try the all-new Yahoo! Mail. "The New Version is radically easier to use" – The Wall Street Journal 
http://uk.docs.yahoo.com/nowyoucan.html


-- 
Ultra Monkey - http://www.ultramonkey.org/
To UNSUBSCRIBE, email to [email protected], with a body:
unsubscribe ultramonkey-users [email protected]
where "[email protected]" is YOUR email address.