"Error: an inet prefix is expected"

Hi,

I'm setting up a new ultramonkey cluster on CentOS4.3 and I'm running
into an issue where heartbeat isn't making the virtual IP address
active.  The error is below:

Error: an inet prefix is expected rather than "207.218.714.13/".

My haresources line looks like:

cluster2.amntv.com      \
        ldirectord::ldirectord.cf \
        LVSSyncDaemonSwap::master \
        IPaddr2::207.218.714.13/255.255.255.0/eth0/207.218.714.255

and here's a snip from /var/log/ha-debug, I separated it by lines to
make it somewhat easier to read.  Any help would be greatly appreciated.
--Ajay

ResourceManager[5204]:  2006/06/19_09:44:17 info: Running
/etc/ha.d/resource.d/LVSSyncDaemonSwap master start

ResourceManager[5204]:  2006/06/19_09:44:17 debug: Starting
/etc/ha.d/resource.d/LVSSyncDaemonSwap master start

LVSSyncDaemonSwap[5320]:        2006/06/19_09:44:17 info:
ipvs_syncbackup down

LVSSyncDaemonSwap[5320]:        2006/06/19_09:44:17 info: ipvs_syncmaster up

LVSSyncDaemonSwap[5320]:        2006/06/19_09:44:17 info:
ipvs_syncmaster obtained

ResourceManager[5204]:  2006/06/19_09:44:17 debug:
/etc/ha.d/resource.d/LVSSyncDaemonSwap master start done. RC=0

ResourceManager[5204]:  2006/06/19_09:44:17 info: Running
/etc/ha.d/resource.d/IPaddr2
207.218.714.13/255.255.255.0/eth0/207.218.714.255 start

ResourceManager[5204]:  2006/06/19_09:44:17 debug: Starting
/etc/ha.d/resource.d/IPaddr2
207.218.714.13/255.255.255.0/eth0/207.218.714.255 start

arptables-noarp-addr_takegiveip[5445]:  2006/06/19_09:44:17 info:
/usr/sbin/arptables-noarp-addr 207.218.714.13 stop: success

IPaddr2[5420]:  2006/06/19_09:44:17 info: /sbin/ip -f inet addr add
207.218.714.13/ brd  dev
Error: an inet prefix is expected rather than "207.218.714.13/".

IPaddr2[5420]:  2006/06/19_09:44:17 /usr/lib/heartbeat/send_arp -i 200
-r 5 -p /var/run/heartbeat/rsctmp/send_arp/send_arp-207.218.714.13
207.218.714.13 auto 207.218.714.13 ffffffffffff

send_arp[5487]: 2006/06/19_09:44:17 info: Disable using logging daemon

usage: send_arp: sends out custom ARP packet. packetfactory.net
        usage: send_arp [-i repeatinterval-ms] [-r repeatcount] [-p
pidfile] device src_ip_addr src_hw_addr broadcast_ip_addr netmask
        If src_hw_addr is "auto" then the address of device will be used

IPaddr2[5420]:  2006/06/19_09:44:18 ERROR: Could not send gratuitous arps

ResourceManager[5204]:  2006/06/19_09:44:18 debug:
/etc/ha.d/resource.d/IPaddr2
207.218.714.13/255.255.255.0/eth0/207.218.714.255 start done. RC=0

heartbeat[5184]: 2006/06/19_09:44:18 info: all HA resource acquisition
completed (standby).

heartbeat[5161]: 2006/06/19_09:44:18 info: Standby resource acquisition
done [all].

heartbeat[5496]: 2006/06/19_09:44:18 debug: notify_world: setting
SIGCHLD Handler to SIG_DFL











-- 
Satyajot (Ajay) Sharma
REVShare
System Administrator


-- 
Ultra Monkey - http://www.ultramonkey.org/
To UNSUBSCRIBE, email to [email protected], with a body:
unsubscribe ultramonkey-users [email protected]
where "[email protected]" is YOUR email address.