(usagi-users 03297) Re: Can't ping6 a global address, while link address is OK??

Hi Patrick,
                 I am not sure but that should be some prefix problem.Can 
you please tell me what prefix are you using for the IPv6 addresses for A 
and B??

Regards,
Sharmila
At 03:01 PM 4/12/2005, you wrote:
>Dear all,
>
>I am building a USAGI network for research purpose.  I
>am not using autoconfiguration, but am rather
>hard-coding the IPv6 addresses to the hosts.  I then
>found some strange behavior in the network when I
>tried to ping6 around.
>
>I have 2 machines A and B, which are connected through
>a hub.  I could ping6 from A to B with both global and
>link addresses, but could only ping6 from B to A with
>link address.  Pinging with the global address from B
>to A results "Destination Unreachable" error.
>
>The global address for A is hardcoded as
>3ffe:302:11:1:250:fcff:fe2a:b616
>
>and for B is hardcoded as
>
>3ffe:302:11:4:202:44ff:fe90:91af
>
>Why would this happen?  Any idea?
>
>Thanks very much in advance.
>
>Regards,
>
>Patrick
>
>
>
>
>__________________________________
>Yahoo! Mail Mobile
>Take Yahoo! Mail with you! Check email on your mobile phone.
>http://mobile.yahoo.com/learn/mail