(usagi-users 03300) Re: Can't ping6 a global address, while link address is OK??

I use /64.

Patrick

--- Sharmila <[email protected]> wrote:
> Hi Patrick,
>                  I am not sure but that should be
> some prefix problem.Can 
> you please tell me what prefix are you using for the
> IPv6 addresses for A 
> and B??
> 
> Regards,
> Sharmila
> At 03:01 PM 4/12/2005, you wrote:
> >Dear all,
> >
> >I am building a USAGI network for research purpose.
>  I
> >am not using autoconfiguration, but am rather
> >hard-coding the IPv6 addresses to the hosts.  I
> then
> >found some strange behavior in the network when I
> >tried to ping6 around.
> >
> >I have 2 machines A and B, which are connected
> through
> >a hub.  I could ping6 from A to B with both global
> and
> >link addresses, but could only ping6 from B to A
> with
> >link address.  Pinging with the global address from
> B
> >to A results "Destination Unreachable" error.
> >
> >The global address for A is hardcoded as
> >3ffe:302:11:1:250:fcff:fe2a:b616
> >
> >and for B is hardcoded as
> >
> >3ffe:302:11:4:202:44ff:fe90:91af
> >
> >Why would this happen?  Any idea?
> >
> >Thanks very much in advance.
> >
> >Regards,
> >
> >Patrick
> >
> >
> >
> >
> >__________________________________
> >Yahoo! Mail Mobile
> >Take Yahoo! Mail with you! Check email on your
> mobile phone.
> >http://mobile.yahoo.com/learn/mail
> 
> 
> 
> 


		
__________________________________ 
Yahoo! Mail Mobile 
Take Yahoo! Mail with you! Check email on your mobile phone. 
http://mobile.yahoo.com/learn/mail