(usagi-users 03434) RouterLifetime=5

I'm running the 2.4.27-rc3 kernel with the corresponding USAGI patch
which is advertised to be IPv6 ready.   The IPv6 conformance tests fails
the "Verify RouterLifetime when receiving RA with RouterLifetime=5" test
every time.  

 

The output from the test has been attached below.  If you need me to
send the captured packets, I will do that.  

 

Any input would be appreciated. 

 

Thanks in advance,

Chris

 

 

 

Here is the output from the test:

 

13:22:58Start 

________________________________

Initialization
Trying to reboot NUT
13:22:58 vRemote(reboot.rmt) ``/usr/local/v6eval//bin/manual//reboot.rmt
-t manual -u root -p qV3f71sc -d cuaa0 -o 1 -s 9600 timeout=300'' 

reboot> 
reboot> Reboot NUT.
reboot>     * Wait until NUT boot up completely.
reboot>         Ex.) Wait until catch up login prompt.
reboot> 
reboot> Press Enter key for continue. 
reboot> 
 


Target: Reboot
13:24:24 Wait 10 second 13:24:34Start Capturing Packets (Link0)
13:24:34 vSend(Link0,ra_tn2allnode_sll)
Router TN Send RA w/ SLL <file:///r:\root\24.html#vSendPKT0> 

Wait for DAD NSs
13:24:34 vRecv(Link0,) timeout:3 cntLimit:0 seektime:0
recv a packet at 13:24:35 <file:///r:\root\24.html#vRecvPKT0>  
vRecv() return status=1 13:24:37 vSend(Link0,echoreq_tn2nut)
send echoreq_tn2nut <file:///r:\root\24.html#vSendPKT1> 
13:24:38 vRecv(Link0,ns_nut2tn ns_nut2tn_sll echorep_nut2tn) timeout:5
cntLimit:1 seektime:1119288278.120184
recv echorep_nut2tn <file:///r:\root\24.html#vRecvPKT1> 
13:24:38 vSend(Link0,unicast_na_tn2nut_RSO_tll)
Router TN send NA <file:///r:\root\24.html#vSendPKT2> 

________________________________

Test
13:24:38 vSend(Link0,echo_request_x2nut_via_w)
Send off-link echo-requests <file:///r:\root\24.html#vSendPKT3> 
13:24:38 vRecv(Link0,echo_reply_nut2x_via_tn multicast_ns_nut2wsolnode)
timeout:2 cntLimit:1 seektime:1119288278.789899
Got echo-reply thrown to Router TN <file:///r:\root\24.html#vRecvPKT2> 

Wait (9 sec)to ignore unicast NSs if any
13:24:39 vRecv(Link0,) timeout:9 cntLimit:0 seektime:0
vRecv() return status=1 13:24:48 vSend(Link0,ra_tn2allnode_sll_clear)
Router TN send RA w/ RouterLifetime=5
<file:///r:\root\24.html#vSendPKT4> 

Wait for expiring RouterLifetime (7 sec)
13:24:48 Wait 7 second 13:24:55 vSend(Link0,echo_request_x2nut_via_w)
Send off-link echo-requests <file:///r:\root\24.html#vSendPKT5> 
13:24:55 vRecv(Link0,echo_reply_nut2x_via_tn multicast_ns_nut2wsolnode)
timeout:2 cntLimit:1 seektime:1119288295.512747
Got echo-reply thrown to Router TN <file:///r:\root\24.html#vRecvPKT3> 

Wait (9 sec)to ignore unicast NSs if any
13:24:55 vRecv(Link0,) timeout:9 cntLimit:0 seektime:0
vRecv() return status=1 
ERROR: NUT doesn't recognize RA (RouterLifetime=5)

________________________________

Termination
13:25:04 vSend(Link0,ra_tn2allnode_clrrtr)
Clear Router TN form the Default Router List
<file:///r:\root\24.html#vSendPKT6> 


*** NG ***
13:25:05 vRecv(Link0,) timeout:9 cntLimit:0 seektime:0
vRecv() return status=1 13:25:14End