(usagi-users 03961) Re: AW: How to enable IPv6 only on a particular interface

Noriaki TAKAMIYA <[email protected]> Thu, 04 Oct 2007 20:16:46 +0900 (JST)

Newsgroups	gmane.linux.ipv6.usagi.users
Message-ID	<[email protected]>

>> Thu, 4 Oct 2007 09:42:05 +0200 
>> [Subject: (usagi-users 03960) AW: How to enable IPv6 only on a particular interface] 
>> "HOFMANN, Dirk" <[email protected]>....

> Hi Pramendra,
> 
> that should be no problem: If you configure manually IPv6 addresses only on one interface and delete all IPv6 link-local addresses (beginning with fe80::) on the other interfaces, than only one interface is able to handle IPv6 packets.
> 
> Furthermore, in /proc/sys/net/ipv6/conf you should only see one eth-interface!

  Yes, and in the example, the MN has two interfaces(eth0, eth1).

  Regards,

--
Noriaki TAKAMIYA