Re: mISDNv2 + CAPI 2.0 with mISDNcapid having issue
Karsten Keil <[email protected]>
| Newsgroups | gmane.linux.isdn.i4l.user |
|---|---|
| Message-ID | <[email protected]> |
Hi Pavel, On 03/24/2013 02:26 AM, Pawel Pastuszak wrote: > Hello everybody, > > I having issue establishing issue connecting to an cisco data connection > here is what the error i am getting not sure if anybody can help me. > > Jan 1 00:49:05 pppd[3557]: Plugin capiplugin.so loaded. > Jan 1 00:49:05 pppd[3557]: capiplugin: $Revision: 1.36 $ > Jan 1 00:49:05 pppd[3557]: capiconn: 1.13 > Jan 1 00:49:05 pppd[3557]: Plugin capiplugin.so loaded. > Jan 1 00:49:05 pppd[3557]: capiplugin: $Revision: 1.36 $ > Jan 1 00:49:05 pppd[3557]: capiconn: 1.13 > Jan 1 00:49:05 pppd[3557]: pppd 2.4.4 started by root, uid 0 > Jan 1 00:49:05 pppd[3557]: capiplugin: phase serialconn. > Jan 1 00:49:05 pppd[3557]: capiplugin: contr=1 > Jan 1 00:49:05 pppd[3557]: capiplugin: contr=2 > Jan 1 00:49:05 pppd[3557]: controller 1: listen_change_state 0 -> 1 > Jan 1 00:49:05 pppd[3557]: controller 2: listen_change_state 0 -> 1 > Jan 1 00:49:05 pppd[3557]: contr 1: listenconf Info=0x0000 (No > additional information) infomask=0x144 cipmask=0x0 capimask2=0x0 > Jan 1 00:49:05 pppd[3557]: controller 1: listen_change_state 1 -> 0 > Jan 1 00:49:05 pppd[3557]: plci_change_state:0x0 0 -> 1 event=1 > Jan 1 00:49:05 pppd[3557]: capiplugin: dialing 4081111111 (hdlc) > Jan 1 00:49:05 pppd[3557]: contr 2: listenconf Info=0x0000 (No > additional information) infomask=0x144 cipmask=0x0 capimask2=0x0 > Jan 1 00:49:05 pppd[3557]: controller 2: listen_change_state 1 -> 0 > Jan 1 00:49:05 pppd[3557]: plci_change_state:0x101 1 -> 2 event=3 > Jan 1 00:49:05 kernel: [ 2916.833309] base_sock_release(f55d6c00) > sk=f4e5c000 > Jan 1 00:49:05 kernel: [ 2916.833323] create_l2entity: ret 1 0 > Jan 1 00:49:05 kernel: [ 2916.833327] create_l2entity: ret 2 0 > Jan 1 00:49:05 kernel: [ 2916.833503] base_sock_release(f55d7500) > sk=f4e5cc00 > Jan 1 00:49:05 kernel: [ 2916.833510] create_l2entity: ret 1 0 > Jan 1 00:49:05 kernel: [ 2916.833512] create_l2entity: ret 2 0 > Jan 1 00:49:05 pppd[3557]: DISCONNECT_IND reason 0x3303 (Protocol error > layer 3) for plci 0x101 > Jan 1 00:49:05 pppd[3557]: plci_change_state:0x101 2 -> 8 event=9 > Jan 1 00:49:05 pppd[3557]: plci_change_state:0x101 8 -> 0 event=11 > Jan 1 00:49:05 pppd[3557]: capiplugin: disconnect(remote): "11" -> > "4081111111" outgoing (pcli=0x101/ncci=0x0) 0x3303 (0x0000) - Protocol > error layer 3 > Jan 1 00:49:05 pppd[3557]: plci_change_state:0x0 0 -> 1 event=1 > Jan 1 00:49:05 pppd[3557]: capiplugin: dialing 4081111111 (hdlc) > Jan 1 00:49:05 pppd[3557]: plci_change_state:0x102 1 -> 2 event=3 > Jan 1 00:49:12 pppd[3557]: DISCONNECT_IND reason 0x3303 (Protocol error > layer 3) for plci 0x102 > Jan 1 00:49:12 pppd[3557]: plci_change_state:0x102 2 -> 8 event=9 > Jan 1 00:49:12 pppd[3557]: plci_change_state:0x102 8 -> 0 event=11 > Jan 1 00:49:12 pppd[3557]: capiplugin: disconnect(remote): "11" -> > "4081111111" outgoing (pcli=0x102/ncci=0x0) 0x3303 (0x0000) - Protocol > error layer 3 > Jan 1 00:49:12 pppd[3557]: capiplugin: Tried all controllers > available. Starting over - status 0 > Jan 1 00:49:17 pppd[3557]: plci_change_state:0x0 0 -> 1 event=1 > Jan 1 00:49:17 pppd[3557]: capiplugin: dialing 4081111111 (hdlc) > Jan 1 00:49:17 pppd[3557]: plci_change_state:0x101 1 -> 2 event=3 > Jan 1 00:49:17 pppd[3557]: DISCONNECT_IND reason 0x3303 (Protocol error > layer 3) for plci 0x101 > Jan 1 00:49:17 pppd[3557]: plci_change_state:0x101 2 -> 8 event=9 > Jan 1 00:49:17 pppd[3557]: plci_change_state:0x101 8 -> 0 event=11 > Jan 1 00:49:17 pppd[3557]: capiplugin: disconnect(remote): "11" -> > "4081111111" outgoing (pcli=0x101/ncci=0x0) 0x3303 (0x0000) - Protocol > error layer 3 > Jan 1 00:49:17 pppd[3557]: plci_change_state:0x0 0 -> 1 event=1 > Jan 1 00:49:17 pppd[3557]: capiplugin: dialing 4081111111 (hdlc) > Jan 1 00:49:17 pppd[3557]: plci_change_state:0x102 1 -> 2 event=3 > Jan 1 00:49:24 pppd[3557]: DISCONNECT_IND reason 0x3303 (Protocol error > layer 3) for plci 0x102 > Jan 1 00:49:24 pppd[3557]: plci_change_state:0x102 2 -> 8 event=9 > Jan 1 00:49:24 pppd[3557]: plci_change_state:0x102 8 -> 0 event=11 > Jan 1 00:49:24 pppd[3557]: capiplugin: disconnect(remote): "11" -> > "4081111111" outgoing (pcli=0x102/ncci=0x0) 0x3303 (0x0000) - Protocol > error layer 3 > Jan 1 00:49:24 pppd[3557]: capiplugin: Tried all controllers > available. Starting over - status 0 > > > > Note I am using linux kernel 3.3.8 and its custom board with mISDN v2. > root@SDR:/etc/ppp/peers# lsmod |grep mISDN > mISDN_dsp 187972 0 > mISDN_core 56708 14 hfcmulti,l1oip,mISDN_dsp > > root@SDR:/etc/ppp/peers# lsmod |grep ppp > pppoe 6428 0 > pppox 908 1 pppoe > ppp_synctty 3900 0 > ppp_async 4956 0 > ppp_generic 17036 4 pppoe,pppox,ppp_synctty,ppp_async > slhc 3676 1 ppp_generic > crc_ccitt 892 1 ppp_async > root@SDR:/etc/ppp/peers# > > Here is the log for mISDNcapid > > root@SDR:/etc/ppp/peers# cat /etc/log/mISDNcapid.log > Jan 1 00:48:56.494819 I daemon.c:2168 > main(03556):Init mISDN lib version 20005, debug = 0 (0) > Jan 1 00:48:56.494881 I daemon.c:2180 > main(03556):Did set eGID to dialout gid:102 > Jan 1 00:48:56.494912 I mc_buffer.c: 40 > mc_buffer_init(03556):Setup mc buffer MI_MCBUFFER_DEBUG > Jan 1 00:48:56.534801 I daemon.c:1930 > main_loop(03556):mIControl added to idx 0 > Jan 1 00:48:56.534827 I daemon.c:1937 > main_loop(03556):mIsock added to idx 1 > Jan 1 00:48:56.534847 I daemon.c:1944 > main_loop(03556):mICAPItimer added to idx 2 > Jan 1 00:48:56.534867 I daemon.c:1952 > main_loop(03556):mCsock added to idx 3 > Jan 1 00:49:05.634887 I daemon.c:1658 > mIcapi_register(03556):register application id 1 fd=11 > Jan 1 00:49:05.634990 I daemon.c:1776 > mIcapi_userflag(03556):UserFlags old=0 new=1 > Jan 1 00:49:05.635132 I daemon.c:1658 > mIcapi_register(03556):register application id 2 fd=12 > Jan 1 00:49:05.635189 I daemon.c:1776 > mIcapi_userflag(03556):UserFlags old=0 new=1 > Jan 1 00:49:05.635769 I layer3/mlayer3.c: 98 > open_layer3(03556):mISDN kernel version 1.01.21 found > Jan 1 00:49:05.635794 I layer3/mlayer3.c: 99 > open_layer3(03556):mISDN user version 1.01.31 found > Jan 1 00:49:05.635815 I layer3/mlayer3.c: 100 > open_layer3(03556):mISDN library interface version 2 release 5 > Jan 1 00:49:05.635974 I layer3/mlayer3.c: 98 > open_layer3(03556):mISDN kernel version 1.01.21 found > Jan 1 00:49:05.635998 I layer3/mlayer3.c: 99 > open_layer3(03556):mISDN user version 1.01.31 found > Jan 1 00:49:05.636019 I layer3/mlayer3.c: 100 > open_layer3(03556):mISDN library interface version 2 release 5 > Jan 1 00:49:05.791911 W lplci.c: 645 > plci_parse_channel_id(03558): LPLCI0101 Appl-002 *3: Channel ID:none > Jan 1 00:49:17.951751 W lplci.c: 645 > plci_parse_channel_id(03558): LPLCI0101 Appl-002 *3: Channel ID:none > Jan 1 00:49:30.111594 W lplci.c: 645 > plci_parse_channel_id(03558): LPLCI0101 Appl-002 *3: Channel ID:none > > > Also here is mine /etc/capi20.conf > root@SDR:/etc/ppp/peers# cat /etc/capi20.conf > mISDN 0 1 1 > mISDN 1 2 1 > > > root@SDR:/etc/ppp/peers# cat cisco > unit 4 > persist > usepeerdns > user sdr > password sdr > maxfail 0 > lcp-echo-failure 6 > lcp-echo-interval 5 > mtu 1492 > nobsdcomp > noccp > nomultilink > sync > ipcp-accept-local > ipcp-accept-remote > plugin capiplugin.so > dialmax 250 > controller 1 > controller1 2 > msn 11 > msn1 11 > protocol hdlc > debug > mrru 1500 > endpoint magic:4711 > /dev/null is missing here, it is needed to use the capiplugin with the userspace capi daemon. My config to a old i4l peer for testing with mISDNcapid was: noreplacedefaultroute sync noauth -chap user test1 plugin userpass.so password test1 defaultroute plugin capiplugin.so #controller 1 #numberprefix 0 number 35 msn 31 protocol hdlc /dev/null > > Any thoughts. > > Thanks, > Pawel > > > > _______________________________________________ > isdn4linux mailing list > [email protected] > https://www.isdn4linux.de/mailman/listinfo/isdn4linux >