Re: mISDNv2 + CAPI 2.0 with mISDNcapid having issue

Karsten Keil <[email protected]>
Newsgroups gmane.linux.isdn.i4l.user
Message-ID <[email protected]> 
Hi Pawel,

On 03/24/2013 03:58 PM, Pawel Pastuszak wrote:
> Hi Karsten,
> 
> I added the /dev/null now i get the following error.
> 
> Jan  1 00:06:17 pppd[3532]: Plugin capiplugin.so loaded.
> Jan  1 00:06:17 pppd[3532]: capiplugin: $Revision: 1.36 $
> Jan  1 00:06:17 pppd[3532]: capiconn:  1.13
> Jan  1 00:06:17 pppd[3533]: pppd 2.4.5 started by root, uid 0
> Jan  1 00:06:17 pppd[3533]: capiplugin: phase serialconn.
> Jan  1 00:06:17 pppd[3533]: capiplugin: contr=1
> Jan  1 00:06:17 pppd[3533]: capiplugin: contr=2
> Jan  1 00:06:17 pppd[3533]: capiplugin: contr=1
> Jan  1 00:06:17 pppd[3533]: capiplugin: contr=1
> Jan  1 00:06:17 pppd[3533]: capiplugin: putmessage(appid=1) - Illegal
> application number 0x1101
> 

Hmm, maybe something left in a insane state form previous tries, can you
reboot the machine to be sure that everything has a clean start ?
Appl Ids are stored  in shared memory so they could survive restart of
the daemon.

Which isdn4k-utils version do you use ?

> Pawel
> 
> On Sun, Mar 24, 2013 at 10:43 AM, Karsten Keil <[email protected]
> <mailto:[email protected]>> wrote:
> 
>     Hi Pavel,
> 
>     On 03/24/2013 02:26 AM, Pawel Pastuszak wrote:
>     > Hello everybody,
>     >
>     > I having issue establishing issue connecting to an cisco data
>     connection
>     > here is what the error i am getting not sure if anybody can help me.
>     >
>     > Jan  1 00:49:05 pppd[3557]: Plugin capiplugin.so loaded.
>     > Jan  1 00:49:05 pppd[3557]: capiplugin: $Revision: 1.36 $
>     > Jan  1 00:49:05 pppd[3557]: capiconn:  1.13
>     > Jan  1 00:49:05 pppd[3557]: Plugin capiplugin.so loaded.
>     > Jan  1 00:49:05 pppd[3557]: capiplugin: $Revision: 1.36 $
>     > Jan  1 00:49:05 pppd[3557]: capiconn:  1.13
>     > Jan  1 00:49:05 pppd[3557]: pppd 2.4.4 started by root, uid 0
>     > Jan  1 00:49:05 pppd[3557]: capiplugin: phase serialconn.
>     > Jan  1 00:49:05 pppd[3557]: capiplugin: contr=1
>     > Jan  1 00:49:05 pppd[3557]: capiplugin: contr=2
>     > Jan  1 00:49:05 pppd[3557]: controller 1: listen_change_state 0 -> 1
>     > Jan  1 00:49:05 pppd[3557]: controller 2: listen_change_state 0 -> 1
>     > Jan  1 00:49:05 pppd[3557]: contr 1: listenconf Info=0x0000 (No
>     > additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
>     > Jan  1 00:49:05 pppd[3557]: controller 1: listen_change_state 1 -> 0
>     > Jan  1 00:49:05 pppd[3557]: plci_change_state:0x0 0 -> 1 event=1
>     > Jan  1 00:49:05 pppd[3557]: capiplugin: dialing 4081111111 (hdlc)
>     > Jan  1 00:49:05 pppd[3557]: contr 2: listenconf Info=0x0000 (No
>     > additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
>     > Jan  1 00:49:05 pppd[3557]: controller 2: listen_change_state 1 -> 0
>     > Jan  1 00:49:05 pppd[3557]: plci_change_state:0x101 1 -> 2 event=3
>     > Jan  1 00:49:05 kernel: [ 2916.833309] base_sock_release(f55d6c00)
>     > sk=f4e5c000
>     > Jan  1 00:49:05 kernel: [ 2916.833323] create_l2entity: ret 1 0
>     > Jan  1 00:49:05 kernel: [ 2916.833327] create_l2entity: ret 2 0
>     > Jan  1 00:49:05 kernel: [ 2916.833503] base_sock_release(f55d7500)
>     > sk=f4e5cc00
>     > Jan  1 00:49:05 kernel: [ 2916.833510] create_l2entity: ret 1 0
>     > Jan  1 00:49:05 kernel: [ 2916.833512] create_l2entity: ret 2 0
>     > Jan  1 00:49:05 pppd[3557]: DISCONNECT_IND reason 0x3303 (Protocol
>     error
>     > layer 3) for plci 0x101
>     > Jan  1 00:49:05 pppd[3557]: plci_change_state:0x101 2 -> 8 event=9
>     > Jan  1 00:49:05 pppd[3557]: plci_change_state:0x101 8 -> 0 event=11
>     > Jan  1 00:49:05 pppd[3557]: capiplugin: disconnect(remote): "11" ->
>     > "4081111111" outgoing (pcli=0x101/ncci=0x0) 0x3303 (0x0000) - Protocol
>     > error layer 3
>     > Jan  1 00:49:05 pppd[3557]: plci_change_state:0x0 0 -> 1 event=1
>     > Jan  1 00:49:05 pppd[3557]: capiplugin: dialing 4081111111 (hdlc)
>     > Jan  1 00:49:05 pppd[3557]: plci_change_state:0x102 1 -> 2 event=3
>     > Jan  1 00:49:12 pppd[3557]: DISCONNECT_IND reason 0x3303 (Protocol
>     error
>     > layer 3) for plci 0x102
>     > Jan  1 00:49:12 pppd[3557]: plci_change_state:0x102 2 -> 8 event=9
>     > Jan  1 00:49:12 pppd[3557]: plci_change_state:0x102 8 -> 0 event=11
>     > Jan  1 00:49:12 pppd[3557]: capiplugin: disconnect(remote): "11" ->
>     > "4081111111" outgoing (pcli=0x102/ncci=0x0) 0x3303 (0x0000) - Protocol
>     > error layer 3
>     > Jan  1 00:49:12 pppd[3557]: capiplugin: Tried all controllers
>     > available.  Starting over - status 0
>     > Jan  1 00:49:17 pppd[3557]: plci_change_state:0x0 0 -> 1 event=1
>     > Jan  1 00:49:17 pppd[3557]: capiplugin: dialing 4081111111 (hdlc)
>     > Jan  1 00:49:17 pppd[3557]: plci_change_state:0x101 1 -> 2 event=3
>     > Jan  1 00:49:17 pppd[3557]: DISCONNECT_IND reason 0x3303 (Protocol
>     error
>     > layer 3) for plci 0x101
>     > Jan  1 00:49:17 pppd[3557]: plci_change_state:0x101 2 -> 8 event=9
>     > Jan  1 00:49:17 pppd[3557]: plci_change_state:0x101 8 -> 0 event=11
>     > Jan  1 00:49:17 pppd[3557]: capiplugin: disconnect(remote): "11" ->
>     > "4081111111" outgoing (pcli=0x101/ncci=0x0) 0x3303 (0x0000) - Protocol
>     > error layer 3
>     > Jan  1 00:49:17 pppd[3557]: plci_change_state:0x0 0 -> 1 event=1
>     > Jan  1 00:49:17 pppd[3557]: capiplugin: dialing 4081111111 (hdlc)
>     > Jan  1 00:49:17 pppd[3557]: plci_change_state:0x102 1 -> 2 event=3
>     > Jan  1 00:49:24 pppd[3557]: DISCONNECT_IND reason 0x3303 (Protocol
>     error
>     > layer 3) for plci 0x102
>     > Jan  1 00:49:24 pppd[3557]: plci_change_state:0x102 2 -> 8 event=9
>     > Jan  1 00:49:24 pppd[3557]: plci_change_state:0x102 8 -> 0 event=11
>     > Jan  1 00:49:24 pppd[3557]: capiplugin: disconnect(remote): "11" ->
>     > "4081111111" outgoing (pcli=0x102/ncci=0x0) 0x3303 (0x0000) - Protocol
>     > error layer 3
>     > Jan  1 00:49:24 pppd[3557]: capiplugin: Tried all controllers
>     > available.  Starting over - status 0
>     >
>     >
>     >
>     > Note I am using linux kernel 3.3.8 and its custom board with mISDN v2.
>     > root@SDR:/etc/ppp/peers# lsmod |grep mISDN
>     > mISDN_dsp             187972  0
>     > mISDN_core             56708 14 hfcmulti,l1oip,mISDN_dsp
>     >
>     > root@SDR:/etc/ppp/peers# lsmod |grep ppp
>     > pppoe                   6428  0
>     > pppox                    908  1 pppoe
>     > ppp_synctty             3900  0
>     > ppp_async               4956  0
>     > ppp_generic            17036  4 pppoe,pppox,ppp_synctty,ppp_async
>     > slhc                    3676  1 ppp_generic
>     > crc_ccitt                892  1 ppp_async
>     > root@SDR:/etc/ppp/peers#
>     >
>     >  Here is the log for mISDNcapid
>     >
>     > root@SDR:/etc/ppp/peers# cat /etc/log/mISDNcapid.log
>     > Jan  1 00:48:56.494819 I         daemon.c:2168
>     > main(03556):Init mISDN lib version 20005, debug = 0 (0)
>     > Jan  1 00:48:56.494881 I         daemon.c:2180
>     > main(03556):Did set eGID to dialout gid:102
>     > Jan  1 00:48:56.494912 I      mc_buffer.c:  40
>     > mc_buffer_init(03556):Setup mc buffer MI_MCBUFFER_DEBUG
>     > Jan  1 00:48:56.534801 I         daemon.c:1930
>     > main_loop(03556):mIControl added to idx 0
>     > Jan  1 00:48:56.534827 I         daemon.c:1937
>     > main_loop(03556):mIsock added to idx 1
>     > Jan  1 00:48:56.534847 I         daemon.c:1944
>     > main_loop(03556):mICAPItimer added to idx 2
>     > Jan  1 00:48:56.534867 I         daemon.c:1952
>     > main_loop(03556):mCsock added to idx 3
>     > Jan  1 00:49:05.634887 I         daemon.c:1658
>     > mIcapi_register(03556):register application id 1 fd=11
>     > Jan  1 00:49:05.634990 I         daemon.c:1776
>     > mIcapi_userflag(03556):UserFlags old=0 new=1
>     > Jan  1 00:49:05.635132 I         daemon.c:1658
>     > mIcapi_register(03556):register application id 2 fd=12
>     > Jan  1 00:49:05.635189 I         daemon.c:1776
>     > mIcapi_userflag(03556):UserFlags old=0 new=1
>     > Jan  1 00:49:05.635769 I layer3/mlayer3.c:  98
>     > open_layer3(03556):mISDN kernel version 1.01.21 found
>     > Jan  1 00:49:05.635794 I layer3/mlayer3.c:  99
>     > open_layer3(03556):mISDN user   version 1.01.31 found
>     > Jan  1 00:49:05.635815 I layer3/mlayer3.c: 100
>     > open_layer3(03556):mISDN library interface version 2 release 5
>     > Jan  1 00:49:05.635974 I layer3/mlayer3.c:  98
>     > open_layer3(03556):mISDN kernel version 1.01.21 found
>     > Jan  1 00:49:05.635998 I layer3/mlayer3.c:  99
>     > open_layer3(03556):mISDN user   version 1.01.31 found
>     > Jan  1 00:49:05.636019 I layer3/mlayer3.c: 100
>     > open_layer3(03556):mISDN library interface version 2 release 5
>     > Jan  1 00:49:05.791911 W          lplci.c: 645
>     > plci_parse_channel_id(03558): LPLCI0101 Appl-002 *3: Channel ID:none
>     > Jan  1 00:49:17.951751 W          lplci.c: 645
>     > plci_parse_channel_id(03558): LPLCI0101 Appl-002 *3: Channel ID:none
>     > Jan  1 00:49:30.111594 W          lplci.c: 645
>     > plci_parse_channel_id(03558): LPLCI0101 Appl-002 *3: Channel ID:none
>     >
>     >
>     > Also here is mine /etc/capi20.conf
>     > root@SDR:/etc/ppp/peers# cat /etc/capi20.conf
>     > mISDN 0 1 1
>     > mISDN 1 2 1
>     >
>     >
>     > root@SDR:/etc/ppp/peers# cat cisco
>     > unit 4
>     > persist
>     > usepeerdns
>     > user sdr
>     > password sdr
>     > maxfail 0
>     > lcp-echo-failure 6
>     > lcp-echo-interval 5
>     > mtu 1492
>     > nobsdcomp
>     > noccp
>     > nomultilink
>     > sync
>     > ipcp-accept-local
>     > ipcp-accept-remote
>     > plugin capiplugin.so
>     > dialmax 250
>     > controller 1
>     > controller1 2
>     > msn 11
>     > msn1 11
>     > protocol hdlc
>     > debug
>     > mrru 1500
>     > endpoint magic:4711
>     >
>     /dev/null
> 
>     is missing here, it is needed to use the capiplugin with the userspace
>     capi daemon.
> 
> 
>     My config to a old i4l peer for testing with mISDNcapid was:
> 
>     noreplacedefaultroute
>     sync
>     noauth
>     -chap
>     user test1
>     plugin userpass.so
>     password test1
>     defaultroute
>     plugin capiplugin.so
>     #controller 1
>     #numberprefix 0
>     number 35
>     msn 31
>     protocol hdlc
>     /dev/null
> 
> 
> 
>     >
>     > Any thoughts.
>     >
>     > Thanks,
>     > Pawel
>     >
>     >
>     >
>     > _______________________________________________
>     > isdn4linux mailing list
>     > [email protected]
>     <mailto:[email protected]>
>     > https://www.isdn4linux.de/mailman/listinfo/isdn4linux
>     >
> 
>
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.