Re: mISDNv2 + CAPI 2.0 with mISDNcapid having issue
Pawel Pastuszak <[email protected]>
| Newsgroups | gmane.linux.isdn.i4l.user |
|---|---|
| Message-ID | <CAAc_KZCZS=O2vz7rZrPXKU2pigfJrZaJ4q+Srz=dgERnw6TceQ@mail.gmail.com> |
Same results after reboot. For mISDN-user the git rev is: df131f57d4d5f75081b3bae75268d69ea21491eb For isdn4k-utils is: e23cdd55623a7c4f91a4b01912bb07bd0bf83fdb which should be 3.25 version tag. And the ISDN driver are from kernel 3.3.8. Pawel On Sun, Mar 24, 2013 at 11:47 AM, Karsten Keil <[email protected]> wrote: > > Hi Pawel, > > On 03/24/2013 03:58 PM, Pawel Pastuszak wrote: > > Hi Karsten, > > > > I added the /dev/null now i get the following error. > > > > Jan 1 00:06:17 pppd[3532]: Plugin capiplugin.so loaded. > > Jan 1 00:06:17 pppd[3532]: capiplugin: $Revision: 1.36 $ > > Jan 1 00:06:17 pppd[3532]: capiconn: 1.13 > > Jan 1 00:06:17 pppd[3533]: pppd 2.4.5 started by root, uid 0 > > Jan 1 00:06:17 pppd[3533]: capiplugin: phase serialconn. > > Jan 1 00:06:17 pppd[3533]: capiplugin: contr=1 > > Jan 1 00:06:17 pppd[3533]: capiplugin: contr=2 > > Jan 1 00:06:17 pppd[3533]: capiplugin: contr=1 > > Jan 1 00:06:17 pppd[3533]: capiplugin: contr=1 > > Jan 1 00:06:17 pppd[3533]: capiplugin: putmessage(appid=1) - Illegal > > application number 0x1101 > > > > Hmm, maybe something left in a insane state form previous tries, can you > reboot the machine to be sure that everything has a clean start ? > Appl Ids are stored in shared memory so they could survive restart of > the daemon. > > Which isdn4k-utils version do you use ? > > > Pawel > > > > On Sun, Mar 24, 2013 at 10:43 AM, Karsten Keil <[email protected] > > <mailto:[email protected]>> wrote: > > > > Hi Pavel, > > > > On 03/24/2013 02:26 AM, Pawel Pastuszak wrote: > > > Hello everybody, > > > > > > I having issue establishing issue connecting to an cisco data > > connection > > > here is what the error i am getting not sure if anybody can help > me. > > > > > > Jan 1 00:49:05 pppd[3557]: Plugin capiplugin.so loaded. > > > Jan 1 00:49:05 pppd[3557]: capiplugin: $Revision: 1.36 $ > > > Jan 1 00:49:05 pppd[3557]: capiconn: 1.13 > > > Jan 1 00:49:05 pppd[3557]: Plugin capiplugin.so loaded. > > > Jan 1 00:49:05 pppd[3557]: capiplugin: $Revision: 1.36 $ > > > Jan 1 00:49:05 pppd[3557]: capiconn: 1.13 > > > Jan 1 00:49:05 pppd[3557]: pppd 2.4.4 started by root, uid 0 > > > Jan 1 00:49:05 pppd[3557]: capiplugin: phase serialconn. > > > Jan 1 00:49:05 pppd[3557]: capiplugin: contr=1 > > > Jan 1 00:49:05 pppd[3557]: capiplugin: contr=2 > > > Jan 1 00:49:05 pppd[3557]: controller 1: listen_change_state 0 -> > 1 > > > Jan 1 00:49:05 pppd[3557]: controller 2: listen_change_state 0 -> > 1 > > > Jan 1 00:49:05 pppd[3557]: contr 1: listenconf Info=0x0000 (No > > > additional information) infomask=0x144 cipmask=0x0 capimask2=0x0 > > > Jan 1 00:49:05 pppd[3557]: controller 1: listen_change_state 1 -> > 0 > > > Jan 1 00:49:05 pppd[3557]: plci_change_state:0x0 0 -> 1 event=1 > > > Jan 1 00:49:05 pppd[3557]: capiplugin: dialing 4081111111 (hdlc) > > > Jan 1 00:49:05 pppd[3557]: contr 2: listenconf Info=0x0000 (No > > > additional information) infomask=0x144 cipmask=0x0 capimask2=0x0 > > > Jan 1 00:49:05 pppd[3557]: controller 2: listen_change_state 1 -> > 0 > > > Jan 1 00:49:05 pppd[3557]: plci_change_state:0x101 1 -> 2 event=3 > > > Jan 1 00:49:05 kernel: [ 2916.833309] base_sock_release(f55d6c00) > > > sk=f4e5c000 > > > Jan 1 00:49:05 kernel: [ 2916.833323] create_l2entity: ret 1 0 > > > Jan 1 00:49:05 kernel: [ 2916.833327] create_l2entity: ret 2 0 > > > Jan 1 00:49:05 kernel: [ 2916.833503] base_sock_release(f55d7500) > > > sk=f4e5cc00 > > > Jan 1 00:49:05 kernel: [ 2916.833510] create_l2entity: ret 1 0 > > > Jan 1 00:49:05 kernel: [ 2916.833512] create_l2entity: ret 2 0 > > > Jan 1 00:49:05 pppd[3557]: DISCONNECT_IND reason 0x3303 (Protocol > > error > > > layer 3) for plci 0x101 > > > Jan 1 00:49:05 pppd[3557]: plci_change_state:0x101 2 -> 8 event=9 > > > Jan 1 00:49:05 pppd[3557]: plci_change_state:0x101 8 -> 0 event=11 > > > Jan 1 00:49:05 pppd[3557]: capiplugin: disconnect(remote): "11" -> > > > "4081111111" outgoing (pcli=0x101/ncci=0x0) 0x3303 (0x0000) - > Protocol > > > error layer 3 > > > Jan 1 00:49:05 pppd[3557]: plci_change_state:0x0 0 -> 1 event=1 > > > Jan 1 00:49:05 pppd[3557]: capiplugin: dialing 4081111111 (hdlc) > > > Jan 1 00:49:05 pppd[3557]: plci_change_state:0x102 1 -> 2 event=3 > > > Jan 1 00:49:12 pppd[3557]: DISCONNECT_IND reason 0x3303 (Protocol > > error > > > layer 3) for plci 0x102 > > > Jan 1 00:49:12 pppd[3557]: plci_change_state:0x102 2 -> 8 event=9 > > > Jan 1 00:49:12 pppd[3557]: plci_change_state:0x102 8 -> 0 event=11 > > > Jan 1 00:49:12 pppd[3557]: capiplugin: disconnect(remote): "11" -> > > > "4081111111" outgoing (pcli=0x102/ncci=0x0) 0x3303 (0x0000) - > Protocol > > > error layer 3 > > > Jan 1 00:49:12 pppd[3557]: capiplugin: Tried all controllers > > > available. Starting over - status 0 > > > Jan 1 00:49:17 pppd[3557]: plci_change_state:0x0 0 -> 1 event=1 > > > Jan 1 00:49:17 pppd[3557]: capiplugin: dialing 4081111111 (hdlc) > > > Jan 1 00:49:17 pppd[3557]: plci_change_state:0x101 1 -> 2 event=3 > > > Jan 1 00:49:17 pppd[3557]: DISCONNECT_IND reason 0x3303 (Protocol > > error > > > layer 3) for plci 0x101 > > > Jan 1 00:49:17 pppd[3557]: plci_change_state:0x101 2 -> 8 event=9 > > > Jan 1 00:49:17 pppd[3557]: plci_change_state:0x101 8 -> 0 event=11 > > > Jan 1 00:49:17 pppd[3557]: capiplugin: disconnect(remote): "11" -> > > > "4081111111" outgoing (pcli=0x101/ncci=0x0) 0x3303 (0x0000) - > Protocol > > > error layer 3 > > > Jan 1 00:49:17 pppd[3557]: plci_change_state:0x0 0 -> 1 event=1 > > > Jan 1 00:49:17 pppd[3557]: capiplugin: dialing 4081111111 (hdlc) > > > Jan 1 00:49:17 pppd[3557]: plci_change_state:0x102 1 -> 2 event=3 > > > Jan 1 00:49:24 pppd[3557]: DISCONNECT_IND reason 0x3303 (Protocol > > error > > > layer 3) for plci 0x102 > > > Jan 1 00:49:24 pppd[3557]: plci_change_state:0x102 2 -> 8 event=9 > > > Jan 1 00:49:24 pppd[3557]: plci_change_state:0x102 8 -> 0 event=11 > > > Jan 1 00:49:24 pppd[3557]: capiplugin: disconnect(remote): "11" -> > > > "4081111111" outgoing (pcli=0x102/ncci=0x0) 0x3303 (0x0000) - > Protocol > > > error layer 3 > > > Jan 1 00:49:24 pppd[3557]: capiplugin: Tried all controllers > > > available. Starting over - status 0 > > > > > > > > > > > > Note I am using linux kernel 3.3.8 and its custom board with mISDN > v2. > > > root@SDR:/etc/ppp/peers# lsmod |grep mISDN > > > mISDN_dsp 187972 0 > > > mISDN_core 56708 14 hfcmulti,l1oip,mISDN_dsp > > > > > > root@SDR:/etc/ppp/peers# lsmod |grep ppp > > > pppoe 6428 0 > > > pppox 908 1 pppoe > > > ppp_synctty 3900 0 > > > ppp_async 4956 0 > > > ppp_generic 17036 4 pppoe,pppox,ppp_synctty,ppp_async > > > slhc 3676 1 ppp_generic > > > crc_ccitt 892 1 ppp_async > > > root@SDR:/etc/ppp/peers# > > > > > > Here is the log for mISDNcapid > > > > > > root@SDR:/etc/ppp/peers# cat /etc/log/mISDNcapid.log > > > Jan 1 00:48:56.494819 I daemon.c:2168 > > > main(03556):Init mISDN lib version 20005, debug = 0 (0) > > > Jan 1 00:48:56.494881 I daemon.c:2180 > > > main(03556):Did set eGID to dialout gid:102 > > > Jan 1 00:48:56.494912 I mc_buffer.c: 40 > > > mc_buffer_init(03556):Setup mc buffer MI_MCBUFFER_DEBUG > > > Jan 1 00:48:56.534801 I daemon.c:1930 > > > main_loop(03556):mIControl added to idx 0 > > > Jan 1 00:48:56.534827 I daemon.c:1937 > > > main_loop(03556):mIsock added to idx 1 > > > Jan 1 00:48:56.534847 I daemon.c:1944 > > > main_loop(03556):mICAPItimer added to idx 2 > > > Jan 1 00:48:56.534867 I daemon.c:1952 > > > main_loop(03556):mCsock added to idx 3 > > > Jan 1 00:49:05.634887 I daemon.c:1658 > > > mIcapi_register(03556):register application id 1 fd=11 > > > Jan 1 00:49:05.634990 I daemon.c:1776 > > > mIcapi_userflag(03556):UserFlags old=0 new=1 > > > Jan 1 00:49:05.635132 I daemon.c:1658 > > > mIcapi_register(03556):register application id 2 fd=12 > > > Jan 1 00:49:05.635189 I daemon.c:1776 > > > mIcapi_userflag(03556):UserFlags old=0 new=1 > > > Jan 1 00:49:05.635769 I layer3/mlayer3.c: 98 > > > open_layer3(03556):mISDN kernel version 1.01.21 found > > > Jan 1 00:49:05.635794 I layer3/mlayer3.c: 99 > > > open_layer3(03556):mISDN user version 1.01.31 found > > > Jan 1 00:49:05.635815 I layer3/mlayer3.c: 100 > > > open_layer3(03556):mISDN library interface version 2 release 5 > > > Jan 1 00:49:05.635974 I layer3/mlayer3.c: 98 > > > open_layer3(03556):mISDN kernel version 1.01.21 found > > > Jan 1 00:49:05.635998 I layer3/mlayer3.c: 99 > > > open_layer3(03556):mISDN user version 1.01.31 found > > > Jan 1 00:49:05.636019 I layer3/mlayer3.c: 100 > > > open_layer3(03556):mISDN library interface version 2 release 5 > > > Jan 1 00:49:05.791911 W lplci.c: 645 > > > plci_parse_channel_id(03558): LPLCI0101 Appl-002 *3: Channel > ID:none > > > Jan 1 00:49:17.951751 W lplci.c: 645 > > > plci_parse_channel_id(03558): LPLCI0101 Appl-002 *3: Channel > ID:none > > > Jan 1 00:49:30.111594 W lplci.c: 645 > > > plci_parse_channel_id(03558): LPLCI0101 Appl-002 *3: Channel > ID:none > > > > > > > > > Also here is mine /etc/capi20.conf > > > root@SDR:/etc/ppp/peers# cat /etc/capi20.conf > > > mISDN 0 1 1 > > > mISDN 1 2 1 > > > > > > > > > root@SDR:/etc/ppp/peers# cat cisco > > > unit 4 > > > persist > > > usepeerdns > > > user sdr > > > password sdr > > > maxfail 0 > > > lcp-echo-failure 6 > > > lcp-echo-interval 5 > > > mtu 1492 > > > nobsdcomp > > > noccp > > > nomultilink > > > sync > > > ipcp-accept-local > > > ipcp-accept-remote > > > plugin capiplugin.so > > > dialmax 250 > > > controller 1 > > > controller1 2 > > > msn 11 > > > msn1 11 > > > protocol hdlc > > > debug > > > mrru 1500 > > > endpoint magic:4711 > > > > > /dev/null > > > > is missing here, it is needed to use the capiplugin with the > userspace > > capi daemon. > > > > > > My config to a old i4l peer for testing with mISDNcapid was: > > > > noreplacedefaultroute > > sync > > noauth > > -chap > > user test1 > > plugin userpass.so > > password test1 > > defaultroute > > plugin capiplugin.so > > #controller 1 > > #numberprefix 0 > > number 35 > > msn 31 > > protocol hdlc > > /dev/null > > > > > > > > > > > > Any thoughts. > > > > > > Thanks, > > > Pawel > > > > > > > > > > > > _______________________________________________ > > > isdn4linux mailing list > > > [email protected] > > <mailto:[email protected]> > > > https://www.isdn4linux.de/mailman/listinfo/isdn4linux > > > > > > > > > _______________________________________________ isdn4linux mailing list [email protected] https://www.isdn4linux.de/mailman/listinfo/isdn4linux