Re: LCR1.14-MISDNV2-Asterisk11-No DialTone?

Hello Gianni,

do you use the hfcpci card driver? Maybe you ran into this problem:
	http://permalink.gmane.org/gmane.linux.isdn.i4l.user/6297

Seems this is not fixed yet in mainline kernel.

Comiling and testing today, I got the same symptoms as you got. Patching 
the driver sources in the kernel (3.10.49) helped.

Cheers
Arnold

Am 04.10.2014 17:23, schrieb Gianni Veloce:
> First many congrats for your continuing support of ISDN telephony.
> I have an old asterisk system with mISDN v1 (kernel 2.6)  since many
> years and trying during last month to renew  and go to mISDN v2 with 3.x
> kernel and Asterisk11.
> I checked and seems that chan_misdn is not working anymore with new
> Asterisk/kernel 3.x and chan_lcr is the solution.
> I have managed to install LCR 1.14. mISDNv2 and asterisk11 (a torture,
> anyway...)
> LCR seems working by itself. Dial tome is heard when picking up the
> (ISDN) phone.
> Then I used the BRIDGE commant to interconnect Int and ast interfaces
> (inside interface.conf).
> Seems working BUT: I get no Diatone at all when picking up the extension
> ISDN phone.....
> Tried various things for the last days...nothing worked. Internet did
> not help either.
> So I would like to ask any hint from your side?
> If I solve also this  am willing to publish and istallation guide when
> finished to help other do this setup in a couple of hours (it took me ~1
> month!!!)
> many thanks
> GV
>
>
>
> _______________________________________________
> isdn4linux mailing list
> [email protected]
> https://www.isdn4linux.de/mailman/listinfo/isdn4linux
>