Re: LCR1.14-MISDNV2-Asterisk11-No DialTone?

Dear ArnoldThanks a lot for taking the time to feedback on my issue.Unfortunately I dont use the PCI board but a USB adapter (hfcsusb).My problem is not the complete loss of sound as the linked topic says. Evrything seems working fine EXCEPT there is no dialtone when "lifting" the ISDN extension. Diatone comes fine when on pure LCR (without Asterisk) but when bridging with Asterisk & chan_lcr, dialtone is not heard at all. As said using ths latest LCR 1.14 (?) - Asterisk 11 and Ubuntu 14 with downgraded kernel 3.10.I feel desperate about this. Even asked the LCR developer by private email for this but no reply yet (on offence)
I think to go and test earlier LCR versions to see if the problem is still there as most probebly chan_lcr is the culprit. 
Any other help is very welcome.
GV 

     On Friday, October 10, 2014 1:27 AM, Arnold Schulz <[email protected]> wrote:
   

 Hello Gianni,

do you use the hfcpci card driver? Maybe you ran into this problem:
    http://permalink.gmane.org/gmane.linux.isdn.i4l.user/6297

Seems this is not fixed yet in mainline kernel.

Comiling and testing today, I got the same symptoms as you got. Patching 
the driver sources in the kernel (3.10.49) helped.

Cheers
Arnold

Am 04.10.2014 17:23, schrieb Gianni Veloce:
> First many congrats for your continuing support of ISDN telephony.
> I have an old asterisk system with mISDN v1 (kernel 2.6)  since many
> years and trying during last month to renew  and go to mISDN v2 with 3.x
> kernel and Asterisk11.
> I checked and seems that chan_misdn is not working anymore with new
> Asterisk/kernel 3.x and chan_lcr is the solution.
> I have managed to install LCR 1.14. mISDNv2 and asterisk11 (a torture,
> anyway...)
> LCR seems working by itself. Dial tome is heard when picking up the
> (ISDN) phone.
> Then I used the BRIDGE commant to interconnect Int and ast interfaces
> (inside interface.conf).
> Seems working BUT: I get no Diatone at all when picking up the extension
> ISDN phone.....
> Tried various things for the last days...nothing worked. Internet did
> not help either.
> So I would like to ask any hint from your side?
> If I solve also this  am willing to publish and istallation guide when
> finished to help other do this setup in a couple of hours (it took me ~1
> month!!!)
> many thanks
> GV
>
>
>
> _______________________________________________
> isdn4linux mailing list
> [email protected]
> https://www.isdn4linux.de/mailman/listinfo/isdn4linux
>
_______________________________________________
isdn4linux mailing list
[email protected]
https://www.isdn4linux.de/mailman/listinfo/isdn4linux

_______________________________________________
isdn4linux mailing list
[email protected]
https://www.isdn4linux.de/mailman/listinfo/isdn4linux