Re: vmac problem on centos 6.5

26.06.2014 08:56, nick tailor пишет:
>
> You have both lvs running as master and the same priority?
>

Sorry!

Wrong config for master :-(

Here is right one:
global_defs {
   router_id u304-vpn
}

vrrp_instance VI_1 {
    state MASTER
    interface eth1
    virtual_router_id 1
    use_vmac
    priority 249
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.26.1/24
    }
     notify_master "/usr/local/bin/vmac_tweak.sh"
}

Thank you!


> Are you trying to do a master / master setup?
>
> Nicktailor.com
> Nick Tailor
>
> On Jun 25, 2014 9:31 PM, "Dmitry Melekhov" <[email protected] 
> <mailto:[email protected]>> wrote:
>
>     Hello!
>
>     Yesterday I tried to switch my two linux routers to use vmac.
>
>     Both of them runs centos 6.5 , master is x86-64 and backup is x86.
>
>     I compiled and installed keepalived 1.2.13, did some preparations like
>
>     #for vrrp mac_vlan
>     net.ipv4.conf.all.arp_ignore = 1
>     net.ipv4.conf.all.arp_announce = 1
>     net.ipv4.conf.all.arp_filter = 0
>     net.ipv4.conf.eth1.arp_filter = 1
>
>
>     Here is config from one master:
>
>     global_defs {
>        router_id u304-vpn
>     }
>
>     vrrp_instance VI_1 {
>         state MASTER
>         interface eth1
>         virtual_router_id 1
>         use_vmac
>         priority 240
>         advert_int 1
>         authentication {
>             auth_type PASS
>             auth_pass pass
>         }
>         virtual_ipaddress {
>     192.168.26.1/24 <http://192.168.26.1/24>
>         }
>         notify_master "/usr/local/bin/vmac_tweak.sh"
>     }
>
>
>     and of slave
>
>
>     global_defs {
>        router_id u304-vpn
>     }
>
>     vrrp_instance VI_1 {
>         state MASTER
>         interface eth1
>         virtual_router_id 1
>         use_vmac
>         priority 240
>         advert_int 1
>         authentication {
>             auth_type PASS
>             auth_pass pass
>         }
>         virtual_ipaddress {
>     192.168.26.1/24 <http://192.168.26.1/24>
>         }
>         notify_master "/usr/local/bin/vmac_tweak.sh"
>     }
>
>
>     vrrp address is 192.168.26.1
>     master is 192.168.26.3
>     backup is 192.168.26.2
>
>     And I successefully use this config without vmac.
>
>     So, after keepalived restart I got vrrp.1 interface on both servers,
>     and mac address of 192.168.26.1 on clients ( tested another linux
>     server
>     and cisco catalyst) is address of this vrrp.1.
>     But not for long, after several minutes it becomes mac address of
>     backup
>     server physical interface, I tried this 3 times and always get the
>     same
>     result.
>
>     Could you tell me what can be wrong?
>
>     Thank you!
>
>
>     ------------------------------------------------------------------------------
>     Open source business process management suite built on Java and
>     Eclipse
>     Turn processes into business applications with Bonita BPM
>     Community Edition
>     Quickly connect people, data, and systems into organized workflows
>     Winner of BOSSIE, CODIE, OW2 and Gartner awards
>     http://p.sf.net/sfu/Bonitasoft
>     _______________________________________________
>     Keepalived-devel mailing list
>     [email protected]
>     <mailto:[email protected]>
>     https://lists.sourceforge.net/lists/listinfo/keepalived-devel
>

------------------------------------------------------------------------------
Open source business process management suite built on Java and Eclipse
Turn processes into business applications with Bonita BPM Community Edition
Quickly connect people, data, and systems into organized workflows
Winner of BOSSIE, CODIE, OW2 and Gartner awards
http://p.sf.net/sfu/Bonitasoft

_______________________________________________
Keepalived-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/keepalived-devel