Re: BUG due to mm-instrumentation

Mathieu Desnoyers <[email protected]> Wed, 27 Feb 2008 11:18:54 -0500
Newsgroups gmane.linux.kernel.tracing
Message-ID <20080227161853.GA10391@Krystal>
* Mathieu Desnoyers ([email protected]) wrote:
> * Jan Kiszka ([email protected]) wrote:
> > Mathieu Desnoyers wrote:
> > > * Jan Kiszka ([email protected]) wrote:
> > >> Hi,
> > >>
> > >> I just ran into an interesting BUG on an LTT-patched (Xenomai) kernel,
> > >> but with markers & LTT disabled:
> > >>
> > >> Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
> > >>  [<ffffffff802c4c75>] page_to_pfn+0x9/0x3d
> > >> PGD 2082f067 PUD 58caf067 PMD 0
> > >> Oops: 0000 [1] SMP
> > >> CPU 2
> > >> Modules linked in: scsi_mod libata ahci ata_piix fan jbd mbcache ext3 raid0 edd sd_mod raid1 xor async_tx async_memcpy async_xor raid456 sg cdrom button i2c_core edac_core rtc_lib e1000 pci_hotplr
> > >> Pid: 1592, comm: ld Not tainted 2.6.24.2-xeno_64 #12
> > >> RIP: 0010:[<ffffffff802c4c75>]  [<ffffffff802c4c75>] page_to_pfn+0x9/0x3d
> > >> RSP: 0018:ffff810058c21868  EFLAGS: 00010246
> > >> RAX: 0000000000000000 RBX: 0000000000041250 RCX: ffff810000011968
> > >> RDX: 0000000000000000 RSI: ffff810000011950 RDI: 0000000000000000
> > >> RBP: ffff810058c21868 R08: 0000000000000000 R09: 00000000000007d9
> > >> R10: 0000000000000000 R11: 0000000000000001 R12: 00000000000c1250
> > >> R13: ffff810000011950 R14: 0000000000000000 R15: 0000000000000000
> > >> FS:  00002b9d20c6fb00(0000) GS:ffff81007df79340(0000) knlGS:0000000000000000
> > >> CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> > >> CR2: 0000000000000000 CR3: 000000007bd25000 CR4: 00000000000006e0
> > >> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > >> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> > >> Process ld (pid: 1592, threadinfo ffff810058c20000, task ffff81007c161040)
> > >> Stack:  ffff810058c218f8 ffffffff802c7909 0000000000000001 0000100000000000
> > >>  0000000000001000 ffff810000011958 000412003dc403b4 00000010000e1250
> > >>  0000000000000000 ffff81007c161040 0000000003163370 ffff81006288e748
> > >> Call Trace:
> > >>  [<ffffffff802c7909>] __alloc_pages+0x355/0x368
> > >>  [<ffffffff802e5e54>] kmem_getpages+0xa9/0x161
> > >>  [<ffffffff802e739d>] cache_grow+0xb3/0x27c
> > >>  [<ffffffff802e7a6e>] cache_alloc_refill+0x1b0/0x201
> > >>  [<ffffffff802e7d08>] kmem_cache_alloc+0xda/0x136
> > >>  [<ffffffff880733e5>] :jbd:journal_add_journal_head+0x35/0x167
> > >>  [<ffffffff8806f938>] :jbd:journal_dirty_data+0x3e/0x1da
> > >>  [<ffffffff8808943d>] :ext3:ext3_journal_dirty_data+0x1d/0x46
> > >>  [<ffffffff88088718>] :ext3:walk_page_buffers+0x70/0x97
> > >>  [<ffffffff88089420>] :ext3:ext3_journal_dirty_data+0x0/0x46
> > >>  [<ffffffff8808b1ff>] :ext3:ext3_ordered_write_end+0x77/0xed
> > >>  [<ffffffff802c2916>] generic_file_buffered_write+0x1dc/0x6aa
> > >>  [<ffffffff8023d34e>] current_fs_time+0x27/0x2e
> > >>  [<ffffffff8809874c>] :ext3:ext3_xattr_security_get+0x26/0x28
> > >>  [<ffffffff802c3147>] __generic_file_aio_write_nolock+0x363/0x397
> > >>  [<ffffffff802c31e7>] generic_file_aio_write+0x6c/0xc8
> > >>  [<ffffffff8808745b>] :ext3:ext3_file_write+0x23/0xa3
> > >>  [<ffffffff802ebed1>] do_sync_write+0xf0/0x137
> > >>  [<ffffffff80366872>] __up_read+0x94/0x9c
> > >>  [<ffffffff8024d3b9>] autoremove_wake_function+0x0/0x3d
> > >>  [<ffffffff802d597e>] vma_merge+0x143/0x1f3
> > >>  [<ffffffff80272fae>] ipipe_check_context+0xc/0xf6
> > >>  [<ffffffff80272fae>] ipipe_check_context+0xc/0xf6
> > >>  [<ffffffff8047c5c3>] cond_resched+0x9/0x3e
> > >>  [<ffffffff802ec701>] vfs_write+0xcc/0x155
> > >>  [<ffffffff802eccae>] sys_write+0x4c/0x75
> > >>  [<ffffffff8020c1f2>] system_call+0x92/0x97
> > >>
> > >>
> > >> Code: 48 8b 07 48 c1 e8 3a 48 8b 14 c5 d0 28 5e 80 48 b8 b7 6d db
> > >> RIP  [<ffffffff802c4c75>] page_to_pfn+0x9/0x3d
> > >>  RSP <ffff810058c21868>
> > >> CR2: 0000000000000000
> > >> ---[ end trace 6f19d1f5ca1f738f ]---
> > >>
> > >>
> > >> This problem obviously starts with
> > >>
> > >> struct page * fastcall
> > >> __alloc_pages(gfp_t gfp_mask, unsigned int order,
> > >>                 struct zonelist *zonelist)
> > >> {
> > >>
> > >> [...]
> > >>
> > >> nopage:
> > >>         if (!(gfp_mask & __GFP_NOWARN) && printk_ratelimit()) {
> > >>                 printk(KERN_WARNING "%s: page allocation failure."
> > >>                         " order:%d, mode:0x%x\n",
> > >>                         p->comm, order, gfp_mask);
> > >>                 dump_stack();
> > >>                 show_mem();
> > >>         }
> > >> got_pg:
> > >>         trace_mark(mm_page_alloc, "order %u pfn %lu", order, page_to_pfn(page));
> > >>         return page;
> > >> }
> > >>
> > >>
> > >> So we can come along trace_mark with page==NULL. But this is something
> > >> page_to_pfn dislikes (with CONFIG_DISCONTIGMEM at least), and I also
> > >> don't think mm_page_alloc is supposed to trace unsuccessful allocations.
> > >> Shouldn't we put
> > >>
> > >> if (page)
> > >> 	trace_mark(...);
> > >>
> > > 
> > > I would rather go for
> > > 
> > > trace_mark(mm_page_alloc, "order %u pfn %lu", order, page?page_to_pfn(page):0);
> > > 
> > > So it would be embedded within the disabled branch.
> > 
> > So you want to record page==NULL?
> > 
> 
> Hrm, I think page == NULL is an error path, so you are right : it should be
> if (page)
>   trace_mark();
> 
> > > 
> > >> here?
> > >>
> > >>
> > >> The second point is that I didn't want tracing for this build at all.
> > >> But looking at the disassembly,
> > >>
> > >> ffffffff802c78f1:       e8 ba 15 f7 ff          callq  ffffffff80238eb0 <printk>
> > >> ffffffff802c78f6:       e8 ac 67 f4 ff          callq  ffffffff8020e0a7 <dump_stack>
> > >> ffffffff802c78fb:       e8 ef d1 f5 ff          callq  ffffffff80224aef <show_mem>
> > >> ffffffff802c7900:       48 8b 7d b0             mov    -0x50(%rbp),%rdi
> > >> ffffffff802c7904:       e8 63 d3 ff ff          callq  ffffffff802c4c6c <page_to_pfn>
> > >> ffffffff802c7909:       48 8b 45 b0             mov    -0x50(%rbp),%rax
> > >> ffffffff802c790d:       48 83 c4 58             add    $0x58,%rsp
> > >> ffffffff802c7911:       5b                      pop    %rbx
> > >> ffffffff802c7912:       41 5c                   pop    %r12
> > >> ffffffff802c7914:       41 5d                   pop    %r13
> > >> ffffffff802c7916:       41 5e                   pop    %r14
> > >> ffffffff802c7918:       41 5f                   pop    %r15
> > >> ffffffff802c791a:       c9                      leaveq
> > >> ffffffff802c791b:       c3                      retq
> > >>
> > >> we see a useless page_to_pfn call. Is this is due to
> > >> __mark_check_format, trying to match format against arguments even
> > >> without CONFIG_MARKERS? Compiler issue?
> > >>
> > > 
> > > Hrm, this is not good. Can you try the following with your config ?
> > > 
> > > #else /* !CONFIG_MARKERS */
> > > #define __trace_mark(name, call_private, format, args...) \
> > >                 if (0)                                    \
> > >                   __mark_check_format(format, ## args)
> > > 
> > > It should still do the format string test, but completely compile out
> > > the code.
> > > 
> > > (please try with a "wrong" format string to see if the compiler still
> > > complains)
> > 
> > Yes, works perfectly! For test reference:
> > 
> > #define trace_mark(name, format, args...) \
> > 	if (0) __mark_check_format(format, ## args)
> > 
> 
> Actually, the "neat version" would be :
> 
> #define trace_mark(name, format, args...)   \
>   do {                                      \
>     if (0)                                  \
>       __mark_check_format(format, ## args); \
>   } while (0)
> 

Here is the proper fix :


Linux Kernel Markers - if check format

Wrap __mark_check_format() into an if(0) to make sure that parameters such as

trace_mark(mm_page_alloc, "order %u pfn %lu", order, page?page_to_pfn(page):0);

(where page_to_pfn() has side-effects) won't generate code because of the
__mark_check_format().

Thanks to Jan Kiszka for reporting this.

Signed-off-by: Mathieu Desnoyers <[email protected]>
CC: Jan Kiszka <[email protected]>
---
 include/linux/marker.h |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

Index: linux-2.6-lttng/include/linux/marker.h
===================================================================
--- linux-2.6-lttng.orig/include/linux/marker.h	2008-02-27 11:08:50.000000000 -0500
+++ linux-2.6-lttng/include/linux/marker.h	2008-02-27 11:11:27.000000000 -0500
@@ -104,10 +104,16 @@ static inline void marker_update_probe_r
 #define MARK_NOARGS " "
 
 /* To be used for string format validity checking with gcc */
-static inline void __printf(1, 2) __mark_check_format(const char *fmt, ...)
+static inline void __printf(1, 2) ___mark_check_format(const char *fmt, ...)
 {
 }
 
+#define __mark_check_format(format, args...)				\
+	do {								\
+		if (0)							\
+			___mark_check_format(format, ## args);		\
+	} while (0)
+
 extern marker_probe_func __mark_empty_function;
 
 extern void marker_probe_cb(const struct marker *mdata,


> Mathieu
> 
> > #define __printf(a,b) __attribute__((format(printf,a,b)))
> > 
> > static inline void __printf(1, 2)
> > __mark_check_format(const char *fmt, ...)
> > {
> > }
> > 
> > extern int foo(int x);
> > 
> > int bar(int y)
> > {
> > 	trace_mark(my_trace, "foo %p", foo(y));
> > 
> > 	return 0;
> > }
> > 
> > 
> > Thanks,
> > Jan
> > 
> > -- 
> > Siemens AG, Corporate Technology, CT SE 2
> > Corporate Competence Center Embedded Linux
> > 
> 
> -- 
> Mathieu Desnoyers
> Computer Engineering Ph.D. Student, Ecole Polytechnique de Montreal
> OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68
> _______________________________________________
> Ltt-dev mailing list
> [email protected]
> http://listserv.shafik.org/mailman/listinfo/ltt-dev
> 

-- 
Mathieu Desnoyers
Computer Engineering Ph.D. Student, Ecole Polytechnique de Montreal
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68