Re: ok what am I missing
Erich Titl <[email protected]>
| Newsgroups | gmane.linux.leaf.user |
|---|---|
| Message-ID | <[email protected]> |
Hi James Am 12.11.2020 um 09:06 schrieb James Becker: > Hey dude sorry for the delay with the router part working at least I had to pay attention to a few other things around the house. I am caught up a bit. I got the modules mounted correctly I think. I am looking at modules.dep but it is 1446 lines not 100% sure what I am looking for. Can I grep this? Sure it is just a text file. New amd chip and parts on the way so I will be busy again here this weekend. I tried to grep it for Broadcom but it appears to have hung researching. Well I got grep to work > > I found this > > firewall# grep bcm modules.dep > kernel/drivers/net/phy/broadcom.ko.gz: kernel/drivers/net/phy/bcm-phy-lib.ko.gz kernel/drivers/net/phy/libphy.ko.gz > kernel/drivers/net/phy/bcm87xx.ko.gz: kernel/drivers/net/phy/libphy.ko.gz > kernel/drivers/net/phy/bcm-phy-lib.ko.gz: kernel/drivers/net/phy/libphy.ko.gz > kernel/drivers/net/phy/bcm7xxx.ko.gz: kernel/drivers/net/phy/bcm-phy-lib.ko.gz kernel/drivers/net/phy/libphy.ko.gz > > Am I correct that 1 of these should be my driver. I assume that the 87xx and the 7xxx are too new. So that should just leave the other 2. Not sure how to tell if 1 is generic or not. Not knowing exactly what hardware you have this is difficult to answer. I suspect you will need firmware for the board too and I am afraid you may have to find it off the mainline kernel. It cannot hurt to just load the modules you identified. They will barf if the hardware does not match. You should also browse the /lib/firmware directory to see if there are firmware modules for this chip/board. cheers ET -- Diese E-Mail wurde von AVG auf Viren geprüft. http://www.avg.com ------------------------------------------------------------------------ leaf-user mailing list: [email protected] https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/