Re: [leaf-wisp] Still having problems with routing

"Ray Gwinn" <[email protected]>
Newsgroups gmane.linux.leaf.wisp-dist
Organization EDCC
Message-ID <404F8426.4151.1328C9@localhost>
Gerry, am not sure I understand your setup completely.  I groped my way through the 
same stuff on Wisp-Dist a few weeks back.

It seems you should be NATing somewhere.  Have you tried enabling NAT to either eth0 
or netcs0?

Ray

On 10 Mar 2004 at 18:41, Gerry Weaver wrote:

> Hi,
> 
> I've been having a lot of routing problems with wisp-dist lately, so I tried
> to setup a very simple config. I set up a Cisco router and a wisp-dist cpe
> with the following I've got both wired and wireless access to the 67.65.229.0
> network.
> 
> # ip route
> 192.168.1.0/24 dev eth0  proto kernel  scope link  src 192.168.1.254
> 67.65.229.0/24 dev netcs0  proto kernel  scope link  src 67.65.229.11
> default via 67.65.229.254 dev netcs0
> 
> client-pc <==> wisp-cpe <==> AirPointPro <==> router
> 
> 
> 
> I can ping everything from the wisp-dist box itself and only the
> cpe(192.168.1.254) from the client pc.
> 
> 
> This config worked fine on the Cisco, but does not work on the wisp-dist
> box. Is there something that I'm missing on Linux / wisp-dist?
> 
> Thanks,
> Gerry
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.576 / Virus Database: 365 - Release Date: 1/30/2004
> 
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by: IBM Linux Tutorials
> Free Linux tutorial presented by Daniel Robbins, President and CEO of
> GenToo technologies. Learn everything from fundamentals to system
> administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> _______________________________________________
> leaf-wisp-dist mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist




-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.