| Newsgroups |
gmane.linux.lfs.automated |
| Message-ID |
<[email protected]> |
14.06.2022 15:06 tarihinde Pierre Labastie ([email protected] via
alfs-discuss Mailing List) yazdı:
> On Tue, 2022-06-14 at 14:11 +0300, Yasin YILMAZ wrote:
>> 14.06.2022 00:32 tarihinde Pierre Labastie ([email protected] via alfs-
>> discuss Mailing List) yazdı:
>>
>>> On Mon, 2022-06-13 at 23:40 +0300, Yasin YILMAZ wrote:
>>>
>>>> 13.06.2022 16:25 tarihinde Yasin YILMAZ ([email protected] via
>>>> alfs-
>>>> discuss Mailing List) yazdı:
>>>>
>>>>
>>>>> This is great. Thanks however.
>>>>>
>>>>> https://www.linuxfromscratch.org/alfs/ I pulled the git clone
>>>>> git://git.linuxfromscratch.org/jhalfs.git jhalfs file again and tried
>>>>> ALFS
>>>>> again. This time I tried with only LFS + Pacman without BLFS, but it
>>>>> still
>>>>> gave an error as below.
>>>>>
>>>>> ---
>>>>> Building target 712-04-libcap
>>>>> [++++/make: *** [Makefile:721: 712-04-libcap] Error 2 ] 0
>>>>> min. 4 sec
>>>>> make[1]: *** [Makefile:113: mk_CHROOT] Error 2
>>>>> make[1]: Leaving diretory '/mnt/lfs/jhalfs'
>>>>> ---
>>>> Despite the updated jhalfs files, I am getting the same error, namely the
>>>> error below.
>>>>
>>>> ---
>>>> Building target 712-04-libcap
>>>> [++++/make: *** [Makefile:721: 712-04-libcap] Error 2 ] 0 min. 4 sec
>>>> make[1]: *** [Makefile:113: mk_CHROOT] Error 2
>>>> make[1]: Leaving diretory '/mnt/lfs/jhalfs'
>>> Hmm, Have you copied the new pkgmngt/packageManager.xml.pacman to
>>> pkgmngt/packageManager.xml (and same for pkgmngt/packInstall.sh.pacman to
>>> pkgmngt/packInstall.sh)?
>>>
>>> Pierre
>>>
>>>
>> I want it so much the error looks different.
>> I pulled the jhalfs files from git clone
>> git://git.linuxfromscratch.org/jhalfs.git in this
>> https://www.linuxfromscratch.org/alfs/ link and edited everything from scratch
>> again and started the LFS + Pacman installation.
>>
>> cp pkgmngt/packageManager.xml.pacman pkgmngt/packageManager.xml
>>
>> and
>>
>> cp pkgmngt/packInstall.sh.pacman pkgmngt/packInstall.sh
>>
>> I applied the commands in the jhalfs folder with the lfs user. I started the
>> process with the make command and while everything was running normally and
>> well, I encountered the following error.
>>
>> ---
>> Building target 803-glibc
>> [+++++++++++make: *** [Makefile:907: 803-glibc] Error 1 ] 39
>> min. 10 sec
>> make[1]: *** [Makefile:113: mk_CHROOT] Error 2
>> make[1]: Leaving diretory '/mnt/lfs/jhalfs'
>> ---
> I think I cannot guess the error this time. Could you attach
> /mnt/lfs/jhalfs/logs/803-glibc-xxx, or at least the relevant part of it?
>
> Or maybe I can try to guess (owing to the duration of the glibc build): you
> might have ticked "Run testsuites", and then chosen
> "Flavour (Abort the build on the first test failure)"
>
> If so, please retry with "Flavour (Don't stop on test failures)". A few glibc
> tests (and a few others) error out, so the build cannot go past those if "Abort
> the build on the first test failure" is selected.
>
> Pierre
>
A file named 803-glibc does not exist in the file path you specified,
but 504-glibc exists in the specified file path.
I will try to cancel the test phase and write to you again about the
situation.
--
*Yasin YILMAZ*Open Source Software & Linux Advocate | Co-Founder of
Linux Turkey Community | Entrepreneur | Company Owner
[email protected]
+90 850 255 23 44 <tel:+90 850 255 23 44>+90 216 706 23 44 <tel:+90 216
706 23 44> (Fax)
Sapanbağları Mh. Heybeli Sk. No: 10/21 Pendik/İstanbul
<https://maps.google.com/?q=Sapanba%C4%9Flar%C4%B1%20Mh.%20Heybeli%20Sk.%20No%3A%2010%2F21%20Pendik%2F%C4%B0stanbul>
https://yasin.net.tr
Facebook <https://www.facebook.com/yaskorecko>LinkedIn
<https://www.linkedin.com/in/yasinyilmaz1/>Instagram
<https://www.instagram.com/ysin_yilmz>
--
http://lists.linuxfromscratch.org/sympa/info/alfs-discuss
Unsubscribe: See the above information page