Re: r11.2-297

On Tue, Jan 31, 2023 at 07:01:52PM +0100, Pierre Labastie wrote:
> On Tue, 2023-01-31 at 17:26 +0100, Dragan wrote:
> > I've successfully build r11.2-297.
> > 
> > Log attached.
> > 
> > Dragan
> 
> Hmmm, weird that you need 130 sec to build binutils pass 1 at -j16. It's around
> 30 sec for me... Have you had a look at the cpuidle governor for your kernel?
> 
> Pierre
> PS: By tweaking the cpuidle governor, I could decrease the SBU at -j1 from 130
> to 80 seconds...

For information, on my Ryzen 4750G a -j1 build of binutils from
r11.2-296 on a host system running r11.2-150 took 103.999 seconds.
Building binutils pass 1 on the completed system took 127.307
seconds.

In each case the host system, but not binutils pass 1, had some
optimzations and hardening, and both were running a 6.1.8 kernel.

You guys with your your souped-up hardware ;-)

ĸen
-- 
    When it was cold, we used to sit by a candle for warmth.
    If it got really cold we lit it.

-- 
http://lists.linuxfromscratch.org/sympa/info/alfs-discuss
Unsubscribe: See the above information page