Re: 11c11040 Fedora 14 32bit need more help

"M. Lambert" <[email protected]>
Newsgroups gmane.linux.linmodem
Message-ID <1302119681.6232.4.camel@laptop>
Hopefully these two files will be of some help.

Can't seem to get far enough for a dialtone test even as anything comm
related 'hangs' ... seems initialization fails.

Noticed a kernel oops during agere module loading in dmesg.txt but I am
nowhere near knowledgeable enough to even understand how to interpret
this.

Thanks again.


On Wed, 2011-04-06 at 09:09 -0400, Marvin Stodolsky wrote: 
> ML
> 
> Please first try an ordinary modem dialout before fax.
> The 0x11c11040 chipset may not support fax under Linux as the true
> modem port is a /dev/pts/N
> FAXing require SOUND capabilities, and I'm not sure whether psuedo
> ports /dev/pts/N  have that sophistication yet.
> 
> Some Smartlink chipsets working with the slmodemd helper do support fax.
> For guidance on this FAX usage, get from
> http://linmodems.technion.ac.il/packages/ get faxing.tar.gz. It has
> samples for a modem using port /dev/ttySL0.
> 
> But if you need really robust FAX support, best buy a
> Hardware/Controller chipset modem.
> 3COM/US Robotics does produce one. Also there are the Agere/LSI Venus
> chipset modems.
> 
> MarvS
> 
> 
> On Wed, Apr 6, 2011 at 12:17 AM, M. Lambert <[email protected]> wrote:
> > Ok....I ran latest scanmodem and followed instructions.
> >
> > Build (dkms worked great) and install worked but still obviously
> > something not right.
> >
> > Attaching ModemData.txt (from AFTER build/install) as I hope not too
> > difficult to have solution.
> >
> > Happy to supply any additional needed files but really really badly need
> > faxing capability soon.
> >
> > Thank you :)
> >
dmesg.txt (text/plain, 72.7 KB)
            CPU0       CPU1       
   0:      42245          0   IO-APIC-edge      timer
   1:         11          0   IO-APIC-edge      i8042
   8:          1          0   IO-APIC-edge      rtc0
   9:       1995          0   IO-APIC-fasteoi   acpi
  12:        145          0   IO-APIC-edge      i8042
  14:      13248          0   IO-APIC-edge      ata_piix
  15:       8429          0   IO-APIC-edge      ata_piix
  16:      22526          0   IO-APIC-fasteoi   uhci_hcd:usb5, i915, yenta
  17:          2          0   IO-APIC-fasteoi   firewire_ohci
  18:          0          0   IO-APIC-fasteoi   uhci_hcd:usb4, mmc0, tifm_7xx1
  19:        716          0   IO-APIC-fasteoi   uhci_hcd:usb3
  23:      10751          0   IO-APIC-fasteoi   ehci_hcd:usb1, uhci_hcd:usb2
  43:          0          0   PCI-MSI-edge      eth0
  44:       1430          0   PCI-MSI-edge      hda_intel
  45:      15077          0   PCI-MSI-edge      iwl3945
 NMI:          0          0   Non-maskable interrupts
 LOC:      44762     319023   Local timer interrupts
 SPU:          0          0   Spurious interrupts
 PMI:          0          0   Performance monitoring interrupts
 PND:          0          0   Performance pending work
 RES:       3620       6980   Rescheduling interrupts
 CAL:        793        123   Function call interrupts
 TLB:        589        484   TLB shootdowns
 TRM:          0          0   Thermal event interrupts
 THR:          0          0   Threshold APIC interrupts
 MCE:          0          0   Machine check exceptions
 MCP:          2          2   Machine check polls
 ERR:          0
 MIS:          0

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35.11-83.fc14.i686 ([email protected]) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #1 SMP Mon Feb 7 07:04:18 UTC 2011
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f680000 (usable)
[    0.000000]  BIOS-e820: 000000007f680000 - 000000007f700000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000] DMI present.
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7f680 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2039MB, range: 1MB, type UC
[    0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[    0.000000] total RAM covered: 2039M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 16M 	num_reg: 3  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2039MB, range: 1MB, type UC
[    0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[    0.000000] initial memory mapped : 0 - 01000000
[    0.000000] found SMP MP-table at [c00f7670] f7670
[    0.000000] init_memory_mapping: 0000000000000000-0000000036ffe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0036c00000 page 2M
[    0.000000]  0036c00000 - 0036ffe000 page 4k
[    0.000000] kernel direct mapping tables up to 36ffe000 @ 7000-e000
[    0.000000] RAMDISK: 373a4000 - 37ff0000
[    0.000000] Allocated new RAMDISK: 00c32000 - 0187dd07
[    0.000000] Move RAMDISK from 00000000373a4000 - 0000000037fefd06 to 00c32000 - 0187dd06
[    0.000000] ACPI: RSDP 000f75e0 00014 (v00 TOSCPL)
[    0.000000] ACPI: RSDT 7f687782 00054 (v01 TOSCPL TOSCPL00 06040000  LTP 00000000)
[    0.000000] ACPI: FACP 7f68fc78 00074 (v01 TOSCPL CALISTGA 06040000 LOHR 0000005A)
[    0.000000] ACPI: DSDT 7f6894ed 0678B (v01 TOSCPL CALISTGA 06040000 INTL 20060608)
[    0.000000] ACPI: FACS 7f690fc0 00040
[    0.000000] ACPI: SLIC 7f68fcec 00176 (v01 TOSCPL TOSCPL00 06040000 LOHR 00000000)
[    0.000000] ACPI: APIC 7f68fe62 00068 (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
[    0.000000] ACPI: HPET 7f68feca 00038 (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
[    0.000000] ACPI: MCFG 7f68ff02 0003C (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
[    0.000000] ACPI: BOOT 7f68ffd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: APIC 7f68ff70 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: SSDT 7f688e9a 0064F (v01 SataRe  SataPri 00001000 INTL 20050624)
[    0.000000] ACPI: SSDT 7f688808 00692 (v01 SataRe  SataSec 00001000 INTL 20050624)
[    0.000000] ACPI: SSDT 7f687d62 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 7f687cbc 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 7f6877d6 004E6 (v01  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1158MB HIGHMEM available.
[    0.000000] 879MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 36ffe000
[    0.000000]   low ram: 0 - 36ffe000
[    0.000000]   node 0 low ram: 00000000 - 36ffe000
[    0.000000]   node 0 bootmap 0000b000 - 00011e00
[    0.000000] (13/32 early reservations) ==> bootmem [0000000000 - 0036ffe000]
[    0.000000]   #0 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #1 [0000400000 - 0000c2c8c0]    TEXT DATA BSS ==> [0000400000 - 0000c2c8c0]
[    0.000000]   #2 [0000c2d000 - 0000c310f0]              BRK ==> [0000c2d000 - 0000c310f0]
[    0.000000]   #3 [00000f7680 - 0000100000]    BIOS reserved ==> [00000f7680 - 0000100000]
[    0.000000]   #4 [00000f7670 - 00000f7680]     MP-table mpf ==> [00000f7670 - 00000f7680]
[    0.000000]   #5 [000009f800 - 000009fd71]    BIOS reserved ==> [000009f800 - 000009fd71]
[    0.000000]   #6 [000009fef5 - 00000f7670]    BIOS reserved ==> [000009fef5 - 00000f7670]
[    0.000000]   #7 [000009fd71 - 000009fef5]     MP-table mpc ==> [000009fd71 - 000009fef5]
[    0.000000]   #8 [0000002000 - 0000003000]       TRAMPOLINE ==> [0000002000 - 0000003000]
[    0.000000]   #9 [0000003000 - 0000007000]      ACPI WAKEUP ==> [0000003000 - 0000007000]
[    0.000000]   #10 [0000007000 - 000000b000]          PGTABLE ==> [0000007000 - 000000b000]
[    0.000000]   #11 [0000c32000 - 000187e000]      NEW RAMDISK ==> [0000c32000 - 000187e000]
[    0.000000]   #12 [000000b000 - 0000012000]          BOOTMAP ==> [000000b000 - 0000012000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000001 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00036ffe
[    0.000000]   HighMem  0x00036ffe -> 0x0007f680
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000001 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007f680
[    0.000000] On node 0 totalpages: 521758
[    0.000000] free_area_init_node: node 0, pgdat c09fe100, node_mem_map c187f020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3966 pages, LIFO batch:0
[    0.000000]   Normal zone: 1728 pages used for memmap
[    0.000000]   Normal zone: 219454 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2318 pages used for memmap
[    0.000000]   HighMem zone: 294260 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s35072 r0 d22272 u2097152
[    0.000000] pcpu-alloc: s35072 r0 d22272 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517680
[    0.000000] Kernel command line: ro root=/dev/mapper/vg_laptop-lv_root rd_LVM_LV=vg_laptop/lv_root rd_LVM_LV=vg_laptop/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 10437100 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00036ffe:0007f680)
[    0.000000] Memory: 2038540k/2087424k available (3765k kernel code, 48492k reserved, 2494k data, 544k init, 1186312k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xff575000 - 0xfffff000   (10792 kB)
[    0.000000]     pkmap   : 0xff000000 - 0xff400000   (4096 kB)
[    0.000000]     vmalloc : 0xf77fe000 - 0xfeffe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf6ffe000   ( 879 MB)
[    0.000000]       .init : 0xc0a1d000 - 0xc0aa5000   ( 544 kB)
[    0.000000]       .data : 0xc07ad46e - 0xc0a1ce70   (2494 kB)
[    0.000000]       .text : 0xc0400000 - 0xc07ad46e   (3765 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:2304
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1728.701 MHz processor.
[    0.001006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.40 BogoMIPS (lpj=1728701)
[    0.001013] pid_max: default: 32768 minimum: 301
[    0.001044] Security Framework initialized
[    0.001058] SELinux:  Initializing.
[    0.001069] SELinux:  Starting in permissive mode
[    0.001141] Mount-cache hash table entries: 512
[    0.001332] Initializing cgroup subsys ns
[    0.001340] Initializing cgroup subsys cpuacct
[    0.001346] Initializing cgroup subsys memory
[    0.001358] Initializing cgroup subsys devices
[    0.001361] Initializing cgroup subsys freezer
[    0.001364] Initializing cgroup subsys net_cls
[    0.001368] Initializing cgroup subsys blkio
[    0.001413] CPU: Physical Processor ID: 0
[    0.001415] CPU: Processor Core ID: 0
[    0.001419] mce: CPU supports 6 MCE banks
[    0.001430] CPU0: Thermal monitoring handled by SMI
[    0.001435] using mwait in idle threads.
[    0.001445] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[    0.001452] PEBS disabled due to CPU errata.
[    0.001460] ... version:                2
[    0.001463] ... bit width:              40
[    0.001465] ... generic registers:      2
[    0.001467] ... value mask:             000000ffffffffff
[    0.001470] ... max period:             000000007fffffff
[    0.001472] ... fixed-purpose events:   3
[    0.001475] ... event mask:             0000000700000003
[    0.002201] ACPI: Core revision 20100428
[    0.002204] TOSHIBA Satellite detected - force copy of DSDT to local memory
[    0.007883] ACPI: Forced DSDT copy: length 0x0678B copied locally, original unmapped
[    0.015011] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.015019] ftrace: allocating 23143 entries in 46 pages
[    0.017073] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.017592] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.027703] CPU0: Intel(R) Core(TM)2 CPU         T5300  @ 1.73GHz stepping 02
[    0.027999] Booting Node   0, Processors  #1 Ok.
[    0.001999] Initializing CPU#1
[    0.001999] CPU1: Thermal monitoring handled by SMI
[    0.099019] Brought up 2 CPUs
[    0.099025] Total of 2 processors activated (6984.42 BogoMIPS).
[    0.099583] sizeof(vma)=88 bytes
[    0.099585] sizeof(page)=32 bytes
[    0.099587] sizeof(inode)=352 bytes
[    0.099589] sizeof(dentry)=132 bytes
[    0.099591] sizeof(ext3inode)=508 bytes
[    0.099593] sizeof(buffer_head)=56 bytes
[    0.099595] sizeof(skbuff)=192 bytes
[    0.099598] sizeof(task_struct)=3228 bytes
[    0.099664] devtmpfs: initialized
[    0.101452] atomic64 test passed for i586+ platform with CX8 and with SSE
[    0.101494] Time:  3:57:31  Date: 04/06/11
[    0.101544] NET: Registered protocol family 16
[    0.101670] ACPI: bus type pci registered
[    0.101769] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.101773] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.101776] PCI: Using MMCONFIG for extended config space
[    0.101779] PCI: Using configuration type 1 for base access
[    0.103373] bio: create slab <bio-0> at 0
[    0.105437] ACPI: EC: Look up EC in DSDT
[    0.109052] ACPI: BIOS _OSI(Linux) query ignored
[    0.112069] ACPI: SSDT 7f688508 00238 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.112531] ACPI: Dynamic OEM Table Load:
[    0.112535] ACPI: SSDT (null) 00238 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.112896] ACPI: SSDT 7f687fc1 004C2 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.113338] ACPI: Dynamic OEM Table Load:
[    0.113342] ACPI: SSDT (null) 004C2 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.113877] ACPI: SSDT 7f688740 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.114333] ACPI: Dynamic OEM Table Load:
[    0.114337] ACPI: SSDT (null) 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.114531] ACPI: SSDT 7f688483 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.114967] ACPI: Dynamic OEM Table Load:
[    0.114971] ACPI: SSDT (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.115560] ACPI: Interpreter enabled
[    0.115565] ACPI: (supports S0 S3 S4 S5)
[    0.115593] ACPI: Using IOAPIC for interrupt routing
[    0.170266] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    0.170741] ACPI: No dock devices found.
[    0.170746] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.171192] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.172058] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.172062] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.172066] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.172070] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    0.172073] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.172077] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.172081] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[    0.172162] pci 0000:00:02.0: reg 10: [mem 0xdc100000-0xdc17ffff]
[    0.172168] pci 0000:00:02.0: reg 14: [io  0x1800-0x1807]
[    0.172175] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[    0.172181] pci 0000:00:02.0: reg 1c: [mem 0xdc200000-0xdc23ffff]
[    0.172229] pci 0000:00:02.1: reg 10: [mem 0xdc180000-0xdc1fffff]
[    0.172354] pci 0000:00:1b.0: reg 10: [mem 0xdc440000-0xdc443fff 64bit]
[    0.172423] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.172429] pci 0000:00:1b.0: PME# disabled
[    0.172539] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.172545] pci 0000:00:1c.0: PME# disabled
[    0.172657] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.172663] pci 0000:00:1c.1: PME# disabled
[    0.172776] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.172782] pci 0000:00:1c.2: PME# disabled
[    0.172856] pci 0000:00:1d.0: reg 20: [io  0x1820-0x183f]
[    0.172928] pci 0000:00:1d.1: reg 20: [io  0x1840-0x185f]
[    0.173004] pci 0000:00:1d.2: reg 20: [io  0x1860-0x187f]
[    0.173076] pci 0000:00:1d.3: reg 20: [io  0x1880-0x189f]
[    0.173145] pci 0000:00:1d.7: reg 10: [mem 0xdc444000-0xdc4443ff]
[    0.173217] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.173224] pci 0000:00:1d.7: PME# disabled
[    0.173403] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.173409] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.173417] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1670 (mask 000f)
[    0.173492] pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
[    0.173501] pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
[    0.173510] pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
[    0.173518] pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
[    0.173527] pci 0000:00:1f.2: reg 20: [io  0x18b0-0x18bf]
[    0.173568] pci 0000:00:1f.2: PME# supported from D3hot
[    0.173574] pci 0000:00:1f.2: PME# disabled
[    0.173640] pci 0000:00:1f.3: reg 20: [io  0x18c0-0x18df]
[    0.173745] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.173751] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.173758] pci 0000:00:1c.0:   bridge window [mem 0xd6000000-0xd7ffffff]
[    0.173767] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.173935] pci 0000:04:00.0: reg 10: [mem 0xd8000000-0xd8000fff]
[    0.174191] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.174205] pci 0000:04:00.0: PME# disabled
[    0.174278] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.174294] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[    0.174300] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.174306] pci 0000:00:1c.1:   bridge window [mem 0xd8000000-0xd9ffffff]
[    0.174316] pci 0000:00:1c.1:   bridge window [mem 0xd2000000-0xd3ffffff 64bit pref]
[    0.174433] pci 0000:05:00.0: reg 10: [io  0x4000-0x40ff]
[    0.174464] pci 0000:05:00.0: reg 18: [mem 0xda000000-0xda000fff 64bit]
[    0.174497] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.174565] pci 0000:05:00.0: supports D1 D2
[    0.174568] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.174575] pci 0000:05:00.0: PME# disabled
[    0.174608] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.174616] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[    0.174622] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.174628] pci 0000:00:1c.2:   bridge window [mem 0xda000000-0xdbffffff]
[    0.174638] pci 0000:00:1c.2:   bridge window [mem 0xd4000000-0xd5ffffff 64bit pref]
[    0.174719] pci 0000:06:04.0: reg 10: [mem 0x00000000-0x00000fff]
[    0.174751] pci 0000:06:04.0: supports D1 D2
[    0.174753] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.174760] pci 0000:06:04.0: PME# disabled
[    0.174806] pci 0000:06:04.1: reg 10: [mem 0xdc005000-0xdc0057ff]
[    0.174817] pci 0000:06:04.1: reg 14: [mem 0xdc000000-0xdc003fff]
[    0.174886] pci 0000:06:04.1: supports D1 D2
[    0.174889] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot
[    0.174895] pci 0000:06:04.1: PME# disabled
[    0.174940] pci 0000:06:04.2: reg 10: [mem 0xdc004000-0xdc004fff]
[    0.175017] pci 0000:06:04.2: supports D1 D2
[    0.175020] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot
[    0.175025] pci 0000:06:04.2: PME# disabled
[    0.175071] pci 0000:06:04.3: reg 10: [mem 0xdc005800-0xdc0058ff]
[    0.175146] pci 0000:06:04.3: supports D1 D2
[    0.175149] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot
[    0.175155] pci 0000:06:04.3: PME# disabled
[    0.175230] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[    0.175236] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.175242] pci 0000:00:1e.0:   bridge window [mem 0xdc000000-0xdc0fffff]
[    0.175252] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.175256] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.175259] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.175320] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-06]
[    0.175352] pci_bus 0000:00: on NUMA node 0
[    0.175358] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.175611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.175710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.175810] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.175938] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.185130] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.185240] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.185349] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.185460] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.185567] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.185675] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.185782] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.185889] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.185945] HEST: Table is not found!
[    0.186020] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.186040] vgaarb: loaded
[    0.186174] SCSI subsystem initialized
[    0.186186] libata version 3.00 loaded.
[    0.186186] usbcore: registered new interface driver usbfs
[    0.186186] usbcore: registered new interface driver hub
[    0.186186] usbcore: registered new device driver usb
[    0.186186] PCI: Using ACPI for IRQ routing
[    0.186186] PCI: pci_cache_line_size set to 64 bytes
[    0.186196] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.186200] reserve RAM buffer: 000000007f680000 - 000000007fffffff 
[    0.186324] NetLabel: Initializing
[    0.186326] NetLabel:  domain hash size = 128
[    0.186328] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.186345] NetLabel:  unlabeled traffic allowed by default
[    0.186353] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.186361] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.186367] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.189025] Switching to clocksource tsc
[    0.205571] pnp: PnP ACPI init
[    0.205604] ACPI: bus type pnp registered
[    0.206117] pnp 00:00: [bus 00-ff]
[    0.206121] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.206124] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.206127] pnp 00:00: [io  0x0d00-0xffff window]
[    0.206130] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.206133] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.206136] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.206139] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.206142] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.206145] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.206148] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.206151] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.206154] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.206157] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.206160] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.206163] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.206166] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.206169] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.206172] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[    0.206176] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.206261] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.206317] pnp 00:01: [io  0xfe00-0xfe7f]
[    0.206320] pnp 00:01: [io  0xfe80-0xfeff]
[    0.206323] pnp 00:01: [io  0xff00-0xff7f]
[    0.206326] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.206328] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[    0.206331] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.206334] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.206337] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.206339] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[    0.206342] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[    0.206345] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[    0.206447] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.207136] pnp 00:02: [io  0x0000-0x001f]
[    0.207139] pnp 00:02: [io  0x0081-0x0091]
[    0.207142] pnp 00:02: [io  0x0093-0x009f]
[    0.207144] pnp 00:02: [io  0x00c0-0x00df]
[    0.207147] pnp 00:02: [dma 4]
[    0.207199] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.207214] pnp 00:03: [mem 0xff000000-0xffffffff]
[    0.207260] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    0.207400] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.207472] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.207490] pnp 00:05: [io  0x00f0]
[    0.207507] pnp 00:05: [irq 13]
[    0.207561] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.207578] pnp 00:06: [io  0x002e-0x002f]
[    0.207580] pnp 00:06: [io  0x0061]
[    0.207583] pnp 00:06: [io  0x0063]
[    0.207586] pnp 00:06: [io  0x0065]
[    0.207591] pnp 00:06: [io  0x0067]
[    0.207594] pnp 00:06: [io  0x0070]
[    0.207596] pnp 00:06: [io  0x0080]
[    0.207599] pnp 00:06: [io  0x0092]
[    0.207601] pnp 00:06: [io  0x00b2-0x00b3]
[    0.207604] pnp 00:06: [io  0x0800-0x080f]
[    0.207606] pnp 00:06: [io  0x1000-0x107f]
[    0.207609] pnp 00:06: [io  0x1180-0x11bf]
[    0.207698] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.207712] pnp 00:07: [io  0x0070-0x0077]
[    0.207719] pnp 00:07: [irq 8]
[    0.207768] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.232885] pnp 00:08: [io  0x0060]
[    0.232888] pnp 00:08: [io  0x0064]
[    0.232895] pnp 00:08: [irq 1]
[    0.232948] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.232966] pnp 00:09: [irq 12]
[    0.233021] pnp 00:09: Plug and Play ACPI device, IDs SYN0705 SYN0700 SYN0002 PNP0f13 (active)
[    0.233103] pnp: PnP ACPI: found 10 devices
[    0.233105] ACPI: ACPI bus type pnp unregistered
[    0.233121] system 00:01: [io  0xfe00-0xfe7f] has been reserved
[    0.233124] system 00:01: [io  0xfe80-0xfeff] has been reserved
[    0.233128] system 00:01: [io  0xff00-0xff7f] has been reserved
[    0.233133] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.233137] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.233141] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.233144] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.233148] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.233152] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.233156] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.233160] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.233168] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.233176] system 00:06: [io  0x0800-0x080f] has been reserved
[    0.233180] system 00:06: [io  0x1000-0x107f] has been reserved
[    0.233184] system 00:06: [io  0x1180-0x11bf] has been reserved
[    0.270135] pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[    0.270140] pci 0000:00:1e.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.270143] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.270148] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.270156] pci 0000:00:1c.0:   bridge window [mem 0xd6000000-0xd7ffffff]
[    0.270163] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.270172] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[    0.270176] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.270184] pci 0000:00:1c.1:   bridge window [mem 0xd8000000-0xd9ffffff]
[    0.270191] pci 0000:00:1c.1:   bridge window [mem 0xd2000000-0xd3ffffff 64bit pref]
[    0.270201] pci 0000:05:00.0: BAR 6: assigned [mem 0xd4000000-0xd401ffff pref]
[    0.270205] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[    0.270209] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.270217] pci 0000:00:1c.2:   bridge window [mem 0xda000000-0xdbffffff]
[    0.270223] pci 0000:00:1c.2:   bridge window [mem 0xd4000000-0xd5ffffff 64bit pref]
[    0.270234] pci 0000:06:04.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[    0.270239] pci 0000:06:04.0: BAR 16: assigned [mem 0x84000000-0x87ffffff]
[    0.270242] pci 0000:06:04.0: BAR 0: assigned [mem 0xdc006000-0xdc006fff]
[    0.270250] pci 0000:06:04.0: BAR 0: set to [mem 0xdc006000-0xdc006fff] (PCI address [0xdc006000-0xdc006fff]
[    0.270254] pci 0000:06:04.0: BAR 13: assigned [io  0x5000-0x50ff]
[    0.270258] pci 0000:06:04.0: BAR 14: assigned [io  0x5400-0x54ff]
[    0.270261] pci 0000:06:04.0: CardBus bridge to [bus 07-0a]
[    0.270263] pci 0000:06:04.0:   bridge window [io  0x5000-0x50ff]
[    0.270270] pci 0000:06:04.0:   bridge window [io  0x5400-0x54ff]
[    0.270277] pci 0000:06:04.0:   bridge window [mem 0x80000000-0x83ffffff pref]
[    0.270283] pci 0000:06:04.0:   bridge window [mem 0x84000000-0x87ffffff]
[    0.270290] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[    0.270294] pci 0000:00:1e.0:   bridge window [io  0x5000-0x5fff]
[    0.270302] pci 0000:00:1e.0:   bridge window [mem 0xdc000000-0xdc0fffff]
[    0.270308] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0x83ffffff pref]
[    0.270332] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.270340] pci 0000:00:1c.0: setting latency timer to 64
[    0.270353] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.270360] pci 0000:00:1c.1: setting latency timer to 64
[    0.270373] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.270379] pci 0000:00:1c.2: setting latency timer to 64
[    0.270389] pci 0000:00:1e.0: setting latency timer to 64
[    0.270403] pci 0000:06:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.270411] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.270414] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.270417] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.270420] pci_bus 0000:02: resource 1 [mem 0xd6000000-0xd7ffffff]
[    0.270424] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.270427] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.270430] pci_bus 0000:04: resource 1 [mem 0xd8000000-0xd9ffffff]
[    0.270433] pci_bus 0000:04: resource 2 [mem 0xd2000000-0xd3ffffff 64bit pref]
[    0.270436] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.270439] pci_bus 0000:05: resource 1 [mem 0xda000000-0xdbffffff]
[    0.270442] pci_bus 0000:05: resource 2 [mem 0xd4000000-0xd5ffffff 64bit pref]
[    0.270446] pci_bus 0000:06: resource 0 [io  0x5000-0x5fff]
[    0.270449] pci_bus 0000:06: resource 1 [mem 0xdc000000-0xdc0fffff]
[    0.270452] pci_bus 0000:06: resource 2 [mem 0x80000000-0x83ffffff pref]
[    0.270455] pci_bus 0000:06: resource 4 [io  0x0000-0xffff]
[    0.270458] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[    0.270461] pci_bus 0000:07: resource 0 [io  0x5000-0x50ff]
[    0.270464] pci_bus 0000:07: resource 1 [io  0x5400-0x54ff]
[    0.270467] pci_bus 0000:07: resource 2 [mem 0x80000000-0x83ffffff pref]
[    0.270470] pci_bus 0000:07: resource 3 [mem 0x84000000-0x87ffffff]
[    0.270506] NET: Registered protocol family 2
[    0.270561] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.270744] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.271418] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.271710] TCP: Hash tables configured (established 131072 bind 65536)
[    0.271713] TCP reno registered
[    0.271717] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.271729] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.271829] NET: Registered protocol family 1
[    0.271857] pci 0000:00:02.0: Boot video device
[    0.272030] PCI: CLS 64 bytes, default 64
[    0.272111] Trying to unpack rootfs image as initramfs...
[    0.737130] Freeing initrd memory: 12592k freed
[    0.746193] Simple Boot Flag at 0x36 set to 0x1
[    0.746717] apm: BIOS not found.
[    0.746895] audit: initializing netlink socket (disabled)
[    0.746914] type=2000 audit(1302062251.745:1): initialized
[    0.760920] highmem bounce pool size: 64 pages
[    0.760927] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.763509] VFS: Disk quotas dquot_6.5.2
[    0.763665] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.764314] msgmni has been set to 1689
[    0.764391] SELinux:  Registering netfilter hooks
[    0.764819] alg: No test for stdrng (krng)
[    0.764887] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.764894] io scheduler noop registered
[    0.764897] io scheduler deadline registered
[    0.764913] io scheduler cfq registered (default)
[    0.765156] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.765222] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.765351] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.765409] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.765534] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.765598] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.765747] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.765883] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.765886] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.766159] acpiphp: Slot [1] registered
[    0.766317] pci-stub: invalid id string ""
[    0.766441] intel_idle: MWAIT substates: 0x22220
[    0.766443] intel_idle: does not run on family 6 model 15
[    0.766587] ACPI: AC Adapter [ACAD] (on-line)
[    0.766691] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.766734] ACPI: Lid Switch [LID0]
[    0.766801] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.766808] ACPI: Power Button [PWRB]
[    0.766888] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.766892] ACPI: Power Button [PWRF]
[    0.767200] ACPI: acpi_idle registered with cpuidle
[    0.770145] Monitor-Mwait will be used to enter C-1 state
[    0.770183] Monitor-Mwait will be used to enter C-2 state
[    0.770220] Monitor-Mwait will be used to enter C-3 state
[    0.770230] Marking TSC unstable due to TSC halts in idle
[    0.770297] Switching to clocksource hpet
[    0.798370] ERST: Table is not found!
[    0.798408] isapnp: Scanning for PnP cards...
[    0.939140] ACPI: Battery Slot [BAT1] (battery present)
[    1.155271] isapnp: No Plug & Play device found
[    1.155634] Non-volatile memory driver v1.3
[    1.155638] Linux agpgart interface v0.103
[    1.155786] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    1.156500] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[    1.160039] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    1.160159] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.162180] brd: module loaded
[    1.162968] loop: module loaded
[    1.163108] ata_piix 0000:00:1f.2: version 2.13
[    1.163134] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.163141] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    1.314055] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.314189] scsi0 : ata_piix
[    1.314334] scsi1 : ata_piix
[    1.315612] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[    1.315616] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[    1.315684] Fixed MDIO Bus: probed
[    1.315755] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.315783] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.315801] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.315807] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.315883] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.315906] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.315921] ehci_hcd 0000:00:1d.7: debug port 1
[    1.319823] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.319845] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdc444000
[    1.329022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.329065] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.329069] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.329072] usb usb1: Product: EHCI Host Controller
[    1.329074] usb usb1: Manufacturer: Linux 2.6.35.11-83.fc14.i686 ehci_hcd
[    1.329077] usb usb1: SerialNumber: 0000:00:1d.7
[    1.329210] hub 1-0:1.0: USB hub found
[    1.329216] hub 1-0:1.0: 8 ports detected
[    1.329325] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.329346] uhci_hcd: USB Universal Host Controller Interface driver
[    1.329373] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.329381] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.329385] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.329436] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.329470] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    1.329511] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.329515] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.329518] usb usb2: Product: UHCI Host Controller
[    1.329520] usb usb2: Manufacturer: Linux 2.6.35.11-83.fc14.i686 uhci_hcd
[    1.329523] usb usb2: SerialNumber: 0000:00:1d.0
[    1.329641] hub 2-0:1.0: USB hub found
[    1.329648] hub 2-0:1.0: 2 ports detected
[    1.329739] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.329747] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.329751] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.329802] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.329847] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    1.329886] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.329890] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.329893] usb usb3: Product: UHCI Host Controller
[    1.329895] usb usb3: Manufacturer: Linux 2.6.35.11-83.fc14.i686 uhci_hcd
[    1.329898] usb usb3: SerialNumber: 0000:00:1d.1
[    1.330039] hub 3-0:1.0: USB hub found
[    1.330045] hub 3-0:1.0: 2 ports detected
[    1.330128] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.330136] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.330141] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.330190] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.330232] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    1.330271] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.330274] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.330277] usb usb4: Product: UHCI Host Controller
[    1.330280] usb usb4: Manufacturer: Linux 2.6.35.11-83.fc14.i686 uhci_hcd
[    1.330283] usb usb4: SerialNumber: 0000:00:1d.2
[    1.330405] hub 4-0:1.0: USB hub found
[    1.330410] hub 4-0:1.0: 2 ports detected
[    1.330494] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    1.330501] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.330506] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.330555] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.330598] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    1.330637] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.330641] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.330644] usb usb5: Product: UHCI Host Controller
[    1.330646] usb usb5: Manufacturer: Linux 2.6.35.11-83.fc14.i686 uhci_hcd
[    1.330649] usb usb5: SerialNumber: 0000:00:1d.3
[    1.330766] hub 5-0:1.0: USB hub found
[    1.330772] hub 5-0:1.0: 2 ports detected
[    1.330939] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.331291] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.331394] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.331403] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.331407] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.331412] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.331416] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.331479] mice: PS/2 mouse device common for all mice
[    1.331730] rtc_cmos 00:07: RTC can wake from S4
[    1.331789] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.331825] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.331956] device-mapper: uevent: version 1.0.3
[    1.332126] device-mapper: ioctl: 4.19.1-ioctl (2010-10-12) initialised: [email protected]
[    1.332369] cpuidle: using governor ladder
[    1.332518] cpuidle: using governor menu
[    1.332822] usbcore: registered new interface driver hiddev
[    1.332839] usbcore: registered new interface driver usbhid
[    1.332842] usbhid: USB HID core driver
[    1.332868] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.333047] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[    1.333050] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[    1.333053] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[    1.333148] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.333165] TCP cubic registered
[    1.333167] Initializing XFRM netlink socket
[    1.333185] NET: Registered protocol family 17
[    1.333225] Using IPI No-Shortcut mode
[    1.333331] PM: Resume from disk failed.
[    1.333347] registered taskstats version 1
[    1.333784]   Magic number: 7:195:967
[    1.333881] rtc_cmos 00:07: setting system clock to 2011-04-06 03:57:33 UTC (1302062253)
[    1.333930] Initalizing network drop monitor service
[    1.334349] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.469658] ata1.00: ATA-7: TOSHIBA MK1637GSX, DL030M, max UDMA/100
[    1.469667] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.473611] ata1.00: configured for UDMA/100
[    1.473941] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK1637GS DL03 PQ: 0 ANSI: 5
[    1.474181] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.474197] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.474273] sd 0:0:0:0: [sda] Write Protect is off
[    1.474277] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.474308] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.474526]  sda:
[    1.504512] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, TO04, max UDMA/33
[    1.506592]  sda1 sda2
[    1.506992] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.545473] ata2.00: configured for UDMA/33
[    1.552540] scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-L632D TO04 PQ: 0 ANSI: 5
[    1.581185] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.581194] Uniform CD-ROM driver Revision: 3.20
[    1.581364] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.581430] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.581502] Freeing unused kernel memory: 544k freed
[    1.581887] Write protecting the kernel text: 3768k
[    1.581969] Write protecting the kernel read-only data: 1840k
[    1.599668] dracut: dracut-006-6.fc14
[    1.606950] dracut: rd_NO_LUKS: removing cryptoluks activation
[    1.616342] udev[84]: starting version 161
[    1.631292] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.681853] acpi device:07: registered as cooling_device2
[    1.682226] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4
[    1.682303] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.713547] [drm] Initialized drm 1.1.0 20060810
[    1.741464] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.741471] i915 0000:00:02.0: setting latency timer to 64
[    1.766999] usb 1-1: New USB device found, idVendor=0c0b, idProduct=b159
[    1.767004] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    1.767008] usb 1-1: Product: DataStation maxi m.u
[    1.767011] usb 1-1: Manufacturer: Trekstor
[    1.767013] usb 1-1: SerialNumber: 0009404f
[    1.767102] [drm] set up 7M of stolen space
[    1.777119] Initializing USB Mass Storage driver...
[    1.777246] scsi2 : usb-storage 1-1:1.0
[    1.777434] usbcore: registered new interface driver usb-storage
[    1.777437] USB Mass Storage support registered.
[    1.874112] [drm] initialized overlay support
[    1.903372] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04713/0x204000/0x0
[    1.903378] synaptics: Toshiba Satellite P200 detected, limiting rate to 40pps.
[    1.933739] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
[    1.972288] usb 1-6: new high speed USB device using ehci_hcd and address 5
[    2.100380] usb 1-6: New USB device found, idVendor=04f2, idProduct=b008
[    2.100384] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    2.100388] usb 1-6: Product: Chicony USB 2.0 Camera
[    2.100390] usb 1-6: Manufacturer: Chicony Electronics Co., Ltd.
[    2.100393] usb 1-6: SerialNumber: SN0001
[    2.308278] usb 2-2: new low speed USB device using uhci_hcd and address 2
[    2.470519] usb 2-2: New USB device found, idVendor=046d, idProduct=c03d
[    2.470527] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.470535] usb 2-2: Product: USB-PS/2 Optical Mouse
[    2.470540] usb 2-2: Manufacturer: Logitech
[    2.486914] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
[    2.487072] generic-usb 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2/input0
[    2.510030] fbcon: inteldrmfb (fb0) is primary device
[    2.624526] Console: switching to colour frame buffer device 160x56
[    2.630779] fb0: inteldrmfb frame buffer device
[    2.630782] drm: registered panic notifier
[    2.630786] Slow work thread pool: Starting up
[    2.630929] Slow work thread pool: Ready
[    2.630938] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.654750] dracut: Starting plymouth daemon
[    2.694039] usb 3-1: new low speed USB device using uhci_hcd and address 2
[    2.788662] scsi 2:0:0:0: Direct-Access     WDC WD50 00AAVS-00ZTB0         PQ: 0 ANSI: 2
[    2.789745] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    2.791881] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.794126] sd 2:0:0:0: [sdb] Write Protect is off
[    2.794130] sd 2:0:0:0: [sdb] Mode Sense: 38 00 00 00
[    2.794133] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[    2.797627] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[    2.797700]  sdb: sdb1
[    2.826870] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[    2.826932] sd 2:0:0:0: [sdb] Attached SCSI disk
[    2.940327] usb 3-1: New USB device found, idVendor=04d9, idProduct=1603
[    2.940332] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.940336] usb 3-1: Product: USB Keyboard
[    2.940338] usb 3-1: Manufacturer:  
[    2.991233] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input7
[    2.991374] generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.1-1/input0
[    3.084162] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input8
[    3.084299] generic-usb 0003:04D9:1603.0003: input,hidraw2: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1d.1-1/input1
[    3.151693] dracut: rd_NO_DM: removing DM RAID activation
[    3.156338] dracut: rd_NO_MD: removing MD RAID activation
[    3.358308] yenta_cardbus 0000:06:04.0: CardBus bridge found [1179:ff00]
[    3.358333] yenta_cardbus 0000:06:04.0: Enabling burst memory read transactions
[    3.358340] yenta_cardbus 0000:06:04.0: Using CSCINT to route CSC interrupts to PCI
[    3.358343] yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to PCI
[    3.358350] yenta_cardbus 0000:06:04.0: TI: mfunc 0x10aa1b22, devctl 0x64
[    3.447345] sdhci: Secure Digital Host Controller Interface driver
[    3.447353] sdhci: Copyright(c) Pierre Ossman
[    3.582428] yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0cf8, PCI irq 16
[    3.582434] yenta_cardbus 0000:06:04.0: Socket status: 30000006
[    3.582439] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #06 to #0a
[    3.582452] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [io  0x5000-0x5fff]
[    3.582457] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: excluding 0x5000-0x50ff 0x5400-0x54ff
[    3.590202] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0xdc000000-0xdc0fffff]
[    3.590207] pcmcia_socket pcmcia_socket0: cs: memory probe 0xdc000000-0xdc0fffff: excluding 0xdc000000-0xdc00ffff
[    3.590228] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[    3.590232] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff
[    3.590833] firewire_ohci 0000:06:04.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    3.641136] firewire_ohci: Added fw-ohci device 0000:06:04.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[    3.641222] sdhci-pci 0000:06:04.3: SDHCI controller found [104c:803c] (rev 0)
[    3.641306] sdhci-pci 0000:06:04.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.641401] Registered led device: mmc0::
[    3.641459] mmc0: SDHCI controller on PCI [0000:06:04.3] using DMA
[    3.668971] dracut: Scanning devices sda2  for LVM logical volumes vg_laptop/lv_root vg_laptop/lv_swap 
[    3.689827] dracut: inactive '/dev/vg_laptop/lv_root' [50.00 GiB] inherit
[    3.689943] dracut: inactive '/dev/vg_laptop/lv_home' [94.59 GiB] inherit
[    3.690056] dracut: inactive '/dev/vg_laptop/lv_swap' [3.94 GiB] inherit
[    4.142401] firewire_core: created device fw0: GUID 00023f75bd401db9, S400
[    4.145091] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    4.233177] dracut: Mounted root filesystem /dev/mapper/vg_laptop-lv_root
[    4.383921] dracut: Loading SELinux policy
[    4.840147] SELinux:  Disabled at runtime.
[    4.840189] SELinux:  Unregistering netfilter hooks
[    4.843144] type=1404 audit(1302062257.008:2): selinux=0 auid=4294967295 ses=4294967295
[    4.911405] dracut: /sbin/load_policy: Can't load policy: No such file or directory
[    5.034462] dracut: Switching root
[    6.118770] readahead-collector: starting
[    7.185071] udev[513]: starting version 161
[    8.738261] microcode: CPU0 sig=0x6f2, pf=0x20, revision=0x57
[    8.738286] microcode: CPU1 sig=0x6f2, pf=0x20, revision=0x57
[    8.738421] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[    9.500163] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    9.500205] r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    9.500323] r8169 0000:05:00.0: setting latency timer to 64
[    9.500418] r8169 0000:05:00.0: irq 43 for MSI/MSI-X
[    9.500575] r8169 0000:05:00.0: eth0: RTL8101e at 0xf84c4000, 00:16:d4:fc:24:f5, XID 14000000 IRQ 43
[    9.509637] intel_rng: FWH not detected
[    9.515083] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    9.515091] ACPI: resource 0000:00:1f.3 [io  0x18c0-0x18df] conflicts with ACPI region SMBI [??? 0x000018c0-0x000018cf flags 0x49]
[    9.515095] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.572591] iTCO_vendor_support: vendor-support=0
[    9.679707] Linux video capture interface: v2.00
[    9.799816] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[    9.802040] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[    9.803029] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[    9.803845] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[    9.804754] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xfffff
[    9.804894] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[    9.805042] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[    9.805178] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[    9.873985] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[    9.874115] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[    9.874207] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    9.964509] tifm_7xx1 0000:06:04.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    9.965883] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[    9.969268] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input9
[    9.969360] usbcore: registered new interface driver uvcvideo
[    9.969363] USB Video Class driver (v1.0.0)
[   10.058928] leds_ss4200: no LED devices found
[   10.305340] microcode: CPU0 updated to revision 0x5c, date = 2010-10-02
[   10.305824] microcode: CPU1 updated to revision 0x5c, date = 2010-10-02
[   10.853866] cfg80211: Calling CRDA to update world regulatory domain
[   11.002082] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.002221] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   11.002319] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.214805] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds
[   11.214809] iwl3945: Copyright(c) 2003-2010 Intel Corporation
[   11.214992] iwl3945 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   11.215021] iwl3945 0000:04:00.0: setting latency timer to 64
[   11.269660] iwl3945 0000:04:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[   11.269665] iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945ABG
[   11.269814] iwl3945 0000:04:00.0: irq 45 for MSI/MSI-X
[   11.270224] audit: name_count maxed, losing inode data: dev=00:07, inode=9001
[   11.270230] audit: name_count maxed, losing inode data: dev=00:07, inode=9001
[   11.270235] audit: name_count maxed, losing inode data: dev=00:07, inode=9001
[   11.270239] audit: name_count maxed, losing inode data: dev=00:07, inode=9001
[   11.270244] audit: name_count maxed, losing inode data: dev=00:07, inode=9001
[   11.270249] audit: name_count maxed, losing inode data: dev=00:07, inode=9001
[   11.270264] audit: name_count maxed, losing inode data: dev=00:07, inode=9001
[   11.270269] audit: name_count maxed, losing inode data: dev=00:07, inode=9001
[   11.270273] audit: name_count maxed, losing inode data: dev=00:07, inode=9001
[   11.270278] audit: name_count maxed, losing inode data: dev=00:07, inode=9019
[   11.270283] audit: name_count maxed, losing inode data: dev=00:07, inode=9019
[   11.270288] audit: name_count maxed, losing inode data: dev=00:07, inode=9019
[   11.270292] audit: name_count maxed, losing inode data: dev=00:07, inode=9019
[   11.270297] audit: name_count maxed, losing inode data: dev=00:07, inode=9019
[   11.270302] audit: name_count maxed, losing inode data: dev=00:07, inode=9019
[   11.270307] audit: name_count maxed, losing inode data: dev=00:07, inode=9019
[   11.270312] audit: name_count maxed, losing inode data: dev=00:07, inode=9019
[   11.270322] audit: name_count maxed, losing inode data: dev=00:07, inode=9019
[   11.270327] audit: name_count maxed, losing inode data: dev=00:07, inode=9019
[   11.270331] audit: name_count maxed, losing inode data: dev=00:07, inode=9019
[   11.270337] audit: name_count maxed, losing inode data: dev=00:07, inode=9019
[   11.270341] audit: name_count maxed, losing inode data: dev=00:07, inode=9019
[   11.571818] audit: name_count maxed, losing inode data: dev=00:07, inode=9001
[   11.571825] audit: name_count maxed, losing inode data: dev=00:07, inode=9073
[   11.571828] phy0: Selected rate control algorithm 'iwl-3945-rs'
[   11.571845] audit: name_count maxed, losing inode data: dev=00:07, inode=9001
[   11.571851] audit: name_count maxed, losing inode data: dev=00:07, inode=9075
[   11.571856] audit: name_count maxed, losing inode data: dev=00:07, inode=9075
[   11.571860] audit: name_count maxed, losing inode data: dev=00:07, inode=9075
[   11.571865] audit: name_count maxed, losing inode data: dev=00:07, inode=9075
[   11.571870] audit: name_count maxed, losing inode data: dev=00:07, inode=9075
[   11.571875] audit: name_count maxed, losing inode data: dev=00:07, inode=9075
[   11.571879] audit: name_count maxed, losing inode data: dev=00:07, inode=9075
[   11.571885] audit: name_count maxed, losing inode data: dev=00:07, inode=9075
[   11.572073] audit: name_count maxed, losing inode data: dev=00:07, inode=9001
[   11.572084] audit: name_count maxed, losing inode data: dev=00:07, inode=9084
[   11.572089] audit: name_count maxed, losing inode data: dev=00:07, inode=9084
[   11.572094] audit: name_count maxed, losing inode data: dev=00:07, inode=9084
[   11.572098] audit: name_count maxed, losing inode data: dev=00:07, inode=9085
[   11.572103] audit: name_count maxed, losing inode data: dev=00:07, inode=9085
[   11.572108] audit: name_count maxed, losing inode data: dev=00:07, inode=9085
[   11.572112] audit: name_count maxed, losing inode data: dev=00:07, inode=9085
[   11.572117] audit: name_count maxed, losing inode data: dev=00:07, inode=9085
[   11.572122] audit: name_count maxed, losing inode data: dev=00:07, inode=9085
[   11.572127] audit: name_count maxed, losing inode data: dev=00:07, inode=9085
[   11.572131] audit: name_count maxed, losing inode data: dev=00:07, inode=9085
[   11.572137] audit: name_count maxed, losing inode data: dev=00:07, inode=9085
[   11.572142] audit: name_count maxed, losing inode data: dev=00:07, inode=9085
[   11.572147] audit: name_count maxed, losing inode data: dev=00:07, inode=9085
[   11.572151] audit: name_count maxed, losing inode data: dev=00:07, inode=9087
[   11.572156] audit: name_count maxed, losing inode data: dev=00:07, inode=9087
[   11.572161] audit: name_count maxed, losing inode data: dev=00:07, inode=9087
[   11.572168] audit: name_count maxed, losing inode data: dev=00:07, inode=9087
[   11.572173] audit: name_count maxed, losing inode data: dev=00:07, inode=9087
[   11.572178] audit: name_count maxed, losing inode data: dev=00:07, inode=9087
[   11.572183] audit: name_count maxed, losing inode data: dev=00:07, inode=9087
[   11.572188] audit: name_count maxed, losing inode data: dev=00:07, inode=9087
[   11.572197] audit: name_count maxed, losing inode data: dev=00:07, inode=9087
[   11.572201] audit: name_count maxed, losing inode data: dev=00:07, inode=9087
[   11.572206] audit: name_count maxed, losing inode data: dev=00:07, inode=9087
[   11.572211] audit: name_count maxed, losing inode data: dev=00:07, inode=9087
[   11.572216] audit: name_count maxed, losing inode data: dev=00:07, inode=9087
[   11.572220] audit: name_count maxed, losing inode data: dev=00:07, inode=9087
[   11.572225] audit: name_count maxed, losing inode data: dev=00:07, inode=9087
[   11.572230] audit: name_count maxed, losing inode data: dev=00:07, inode=9087
[   11.572235] audit: name_count maxed, losing inode data: dev=00:07, inode=9087
[   11.572240] audit: name_count maxed, losing inode data: dev=00:07, inode=9087
[   11.572244] audit: name_count maxed, losing inode data: dev=00:07, inode=9086
[   11.713811] cfg80211: World regulatory domain updated:
[   11.713815]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.713819]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.713823]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.713827]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.713830]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.713834]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.027758] cfg80211: Calling CRDA for country: CA
[   12.035144] cfg80211: Regulatory domain changed to country: CA
[   12.035147]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.035151]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   12.035155]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   12.035159]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.035163]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.035166]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   13.737822] EXT4-fs (dm-0): re-mounted. Opts: (null)
[   14.008874] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   14.073074] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   14.842342] Adding 4128764k swap on /dev/mapper/vg_laptop-lv_swap.  Priority:-1 extents:1 across:4128764k 
[   15.332146] readahead-disable-service: delaying service auditd
[   19.567099] NET: Registered protocol family 10
[   19.567362] lo: Disabled Privacy Extensions
[   22.311954] iwl3945 0000:04:00.0: loaded firmware version 15.32.2.9
[   22.385869] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   22.415053] r8169 0000:05:00.0: eth0: link down
[   22.415403] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.435242] RPC: Registered udp transport module.
[   22.435246] RPC: Registered tcp transport module.
[   22.435248] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   25.549545] vboxdrv: Found 2 processor cores.
[   25.549731] vboxdrv: fAsync=0 offMin=0x3c2 offMax=0xe1e
[   25.549795] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   25.549798] vboxdrv: Successfully loaded version 4.0.4 (interface 0x00160000).
[   37.684297] type=1305 audit(1302062289.848:27186): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1
[   37.684307] type=1305 audit(1302062289.848:27187): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
[   39.087158] readahead-collector: starting delayed service auditd
[   40.019648] readahead-collector: sorting
[   40.197118] readahead-collector: finished
[   52.802028] fuse init (API version 7.14)
[   72.880694] wlan0: deauthenticating from 00:13:46:f7:47:a4 by local choice (reason=3)
[   72.923622] wlan0: authenticate with 00:13:46:f7:47:a4 (try 1)
[   72.925379] wlan0: authenticated
[   72.925999] wlan0: associate with 00:13:46:f7:47:a4 (try 1)
[   72.929519] wlan0: RX AssocResp from 00:13:46:f7:47:a4 (capab=0x431 status=0 aid=1)
[   72.929528] wlan0: associated
[   72.932188] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   72.932266] cfg80211: Calling CRDA for country: US
[   72.938037] cfg80211: Regulatory domain changed to country: US
[   72.938041]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   72.938046]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   72.938049]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   72.938053]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   72.938057]     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   72.938060]     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   72.938064]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   73.470163] padlock: VIA PadLock not detected.
[   83.746052] wlan0: no IPv6 routers present
[  281.749320] * Hello Agere Driver **
[  281.749720] usbcore: registered new interface driver agr12dec2006
[  284.773421] Loading module Agere Modem Controller driver version 2.1.80 (2007-10-01)
[  284.773428] Disabling lock debugging due to kernel taint
[  284.776871] serial8250_register_ports: BaseAddress 0x0004 Irq 44 
[  284.776878] ttyAGS3 at I/O 0x4 (irq = 44) is a AgereModem
[  284.777633] agrserial - ret_val 0, call: lt_modem_ops.init_modem
[  284.777639] Loading module Agere Modem Interface driver version 2.1.80.0 (2007-10-01)
[  284.788425] ==> codecType = 0x32
[  284.788450] BUG: unable to handle kernel NULL pointer dereference at 00000037
[  284.788456] IP: [<f9805652>] findHDACodec+0x18/0x43 [agrmodem]
[  284.788508] *pde = 00000000 
[  284.788511] Oops: 0000 [#1] SMP 
[  284.788515] last sysfs file: /sys/devices/virtual/tty/ttyAGS3/uevent
[  284.788520] Modules linked in: agrserial agrmodem aes_i586 aes_generic fuse vboxnetadp vboxnetflt vboxdrv sunrpc ipv6 cpufreq_ondemand acpi_cpufreq mperf uinput arc4 ecb snd_hda_codec_realtek iwl3945 iwlcore snd_hda_intel mac80211 snd_hda_codec snd_hwdep cfg80211 snd_seq snd_seq_device snd_pcm snd_timer snd rfkill soundcore uvcvideo tifm_7xx1 tifm_core iTCO_wdt videodev iTCO_vendor_support snd_page_alloc i2c_i801 r8169 mii serio_raw joydev microcode sdhci_pci sdhci firewire_ohci firewire_core mmc_core crc_itu_t yenta_socket usb_storage i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: scsi_wait_scan]
[  284.788579] 
[  284.788583] Pid: 2859, comm: wvdialconf Tainted: P            2.6.35.11-83.fc14.i686 #1 ISRAE/Satellite P200
[  284.788588] EIP: 0060:[<f9805652>] EFLAGS: 00010246 CPU: 1
[  284.788631] EIP is at findHDACodec+0x18/0x43 [agrmodem]
[  284.788635] EAX: f5f3da00 EBX: f84320c4 ECX: 00000003 EDX: 00000000
[  284.788638] ESI: f84320c4 EDI: f8432028 EBP: f3305cc8 ESP: f3305cc8
[  284.788641]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[  284.788645] Process wvdialconf (pid: 2859, ti=f3304000 task=f3cc9940 task.ti=f3304000)
[  284.788648] Stack:
[  284.788650]  f3305cd0 f980568a f3305cf0 f97f04e9 f843c5e9 f843c5ea f3305cf0 c07a60b3
[  284.788657] <0> f981e95b f3305d3f f3305d60 f97d9771 f84320c4 f842e048 00000008 00000001
[  284.788665] <0> f843239c 00000004 f3305d98 c04ad4e9 c09fee00 00000000 00000041 f3305d30
[  284.788673] Call Trace:
[  284.788719]  [<f980568a>] ? azlGetResourceInformation+0xd/0x14 [agrmodem]
[  284.788772]  [<f97f04e9>] ? CAzlIntelInit+0x2d/0x3c4 [agrmodem]
[  284.788789]  [<c07a60b3>] ? printk+0x25/0x2a
[  284.788847]  [<f97d9771>] ? LXHardwareStart+0x11de/0x13fb [agrmodem]
[  284.788863]  [<c04ad4e9>] ? __alloc_pages_nodemask+0x10a/0x5ad
[  284.788868]  [<c045e36d>] ? __raw_local_irq_save+0x19/0x1e
[  284.788927]  [<f97d4f28>] ? linux_modem_open+0x45/0x10e [agrmodem]
[  284.788939]  [<c04443d5>] ? mod_timer+0x70/0x78
[  284.788976]  [<f972e1a1>] ? modemPortOpen+0xd/0x17 [agrmodem]
[  284.788982]  [<f8445bb0>] ? serial8250_startup+0x7c/0x2ac [agrserial]
[  284.788986]  [<c04ad9b0>] ? __get_free_pages+0x24/0x26
[  284.788992]  [<c0648e17>] ? uart_startup+0x7b/0x102
[  284.788996]  [<c0649425>] ? uart_open+0x133/0x329
[  284.789002]  [<c06290c2>] ? tty_ldisc_setup+0x5d/0x66
[  284.789007]  [<c07a7964>] ? _raw_spin_lock+0xd/0xf
[  284.789011]  [<c0622121>] ? check_tty_count+0x3a/0x93
[  284.789015]  [<c0624401>] ? tty_open+0x2f8/0x45b
[  284.789022]  [<c04ddd05>] ? chrdev_open+0xe9/0x10d
[  284.789027]  [<c04d9a85>] ? __dentry_open+0x132/0x21f
[  284.789031]  [<c04da789>] ? nameidata_to_filp+0x31/0x45
[  284.789035]  [<c04ddc1c>] ? chrdev_open+0x0/0x10d
[  284.789041]  [<c04e46ad>] ? do_last+0x3a4/0x4b7
[  284.789045]  [<c04e4b52>] ? do_filp_open+0x392/0x41f
[  284.789052]  [<c042a29e>] ? need_resched+0x19/0x23
[  284.789056]  [<c042a2b5>] ? should_resched+0xd/0x28
[  284.789062]  [<c05b6ea8>] ? might_fault+0x1e/0x20
[  284.789066]  [<c04da7ea>] ? do_sys_open+0x4d/0xe4
[  284.789070]  [<c04da8a4>] ? sys_open+0x23/0x2b
[  284.789074]  [<c07a7d5c>] ? syscall_call+0x7/0xb
[  284.789077] Code: fe 83 c4 24 81 fb a0 01 00 00 75 cc 8d 65 f8 5b 5e 5d c3 55 89 e5 0f 1f 44 00 00 a1 d8 4e 5d f8 31 d2 8b 80 68 01 00 00 8b 48 74 <8b> 44 91 34 85 c0 74 1f 66 81 78 1a c1 11 75 0d a3 6c 79 83 f9 
[  284.789121] EIP: [<f9805652>] findHDACodec+0x18/0x43 [agrmodem] SS:ESP 0068:f3305cc8
[  284.789167] CR2: 0000000000000037
[  284.789181] ---[ end trace 8ca6a9e4eb39a82f ]---

Module                  Size  Used by
agrserial               9160  3 
agrmodem             1248065  1 
aes_i586                7138  2 
aes_generic            26460  1 aes_i586
fuse                   51648  5 
vboxnetadp              5950  0 
vboxnetflt             16051  0 
vboxdrv               173274  2 vboxnetadp,vboxnetflt
sunrpc                165546  1 
ipv6                  229581  32 
cpufreq_ondemand        7262  2 
acpi_cpufreq            6285  0 
mperf                   1141  1 acpi_cpufreq
uinput                  5228  0 
arc4                    1085  2 
ecb                     1595  2 
snd_hda_codec_realtek   210808  1 
iwl3945                97265  0 
iwlcore               160590  1 iwl3945
snd_hda_intel          20151  2 
mac80211              188716  2 iwl3945,iwlcore
snd_hda_codec          71701  3 agrmodem,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               4795  1 snd_hda_codec
cfg80211              110951  3 iwl3945,iwlcore,mac80211
snd_seq                43435  0 
snd_seq_device          5056  1 snd_seq
snd_pcm                61769  2 snd_hda_intel,snd_hda_codec
snd_timer              15435  2 snd_seq,snd_pcm
snd                    47365  13 agrmodem,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer
rfkill                 13652  2 cfg80211
soundcore               5088  1 snd
uvcvideo               49189  0 
tifm_7xx1               4585  0 
tifm_core               4953  1 tifm_7xx1
iTCO_wdt                8960  0 
videodev               60378  1 uvcvideo
iTCO_vendor_support     2070  1 iTCO_wdt
snd_page_alloc          6180  2 snd_hda_intel,snd_pcm
i2c_i801                9016  0 
r8169                  31809  0 
mii                     3578  1 r8169
serio_raw               3589  0 
joydev                  7306  0 
microcode              11067  0 
sdhci_pci               6246  0 
sdhci                  15685  1 sdhci_pci
firewire_ohci          17697  0 
firewire_core          37873  1 firewire_ohci
mmc_core               53194  1 sdhci
crc_itu_t               1235  1 firewire_core
yenta_socket           20882  0 
usb_storage            35567  1 
i915                  242080  4 
drm_kms_helper         22278  1 i915
drm                   139248  4 i915,drm_kms_helper
i2c_algo_bit            4197  1 i915
i2c_core               21445  6 videodev,i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
video                  17730  1 i915
output                  1625  1 video
agrsm-test.txt (text/plain, 635 B)
FATAL: Module agrserial is in use.
FATAL: Module agrmodem is in use.
Loading drivers:

Drivers loaded:
agrserial               9160  2 
agrmodem             1248065  1 
snd_hda_codec          71701  3 agrmodem,snd_hda_codec_realtek,snd_hda_intel
snd                    47365  13 agrmodem,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer

and symbolic link created:
lrwxrwxrwx 1 root root 12 Apr  5 23:02 /dev/ttySAGR -> /dev/ttyAGS3

Checking for utility wvdialconf
Found /usr/bin/wvdialconf, preparing to run:
	wvdialconf /etc/wvdial.conf

Modem Port Scan<*1>: S0   S1   S2   S3
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.