Re: please help

Hesham,

scanModem reports that you have an agrsm modem supported through agrsm
modem driver:

Predictive  diagnostics for card in bus 05:00.0:
	Modem chipset  detected on
NAME="Communication controller: Agere Systems V.92 56K WinModem "
CLASS=0780
PCIDEV=11c1:048c
SUBSYS=11c1:044c
IRQ=3
HDA2=00:1b.0
HDA2=01:00.1
IDENT=agrsm

 For candidate modem in:  05:00.0
   0780 Communication controller: Agere Systems V.92 56K WinModem
      Primary device ID:  11c1:048c
 Support type needed or chipset:	agrsm



The AgereSystems/LSI agrsm code supports compiling of a agrmodem +
agrserial driver pair.
There are a few different chipsets which use this driver pair, but
they use different code resources:
Chipsets			KV*	PackageNames (most current as of November 2009)
----------------------------------------------------------------------------------------------
11c1:048c and 11c1:048f
2.6.29	agrsm048pci-2.1.60_20100108_i386.deb or
agrsm048pci-2.1.60_20100108.tar.gz
11c1:0620                       2.6.31
agrsm06pci-2.1.80_20100106_i386.deb or
agrsm06pci-2.1.80~20100106.tar.gz !!
11c11040 (on HDA audio cards)   2.6.31
agrsm-11c11040_20091225_i386.deb or
agrsm-11c11040-2.1.80~20091225.tar.bz2  !!
   All available at:
http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Additionally there are;
automation & testing                    agrsm-tools_0.0.1_all.deb or
agrsm-tools-0.0.1-2.noarch.rpm
General background                      agrsm_howto.txt
------------------------------------------------------------------------------------------------
* KV == latest kernel release with a reported success
!! Latest update with major credit to  Nikolay Zhuravlev
   But see conflict issue:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html
   For the 11c11040 chip with kernels 2.6.31 and later a change in a
modules loading settingmay be necessary.
   Within the file /etc/modprobe.d/alsa-base.conf  (or equivalent for
your Distro), change the phrase:
      options snd-hda-intel power_save=10
   to:
      options snd-hda-intel power_save=0
   or the agrsm drivers will not function. For Ubuntu related systems
this can be done with:
   $ sudo gedit /etc/modprobe.d/alsa-base.conf

Report from  Bjorn Wielens:
Please note- trying to load the modules on a OpenSuSE 11.2 system gives
 an error about the module_version symbol. Using:
# modprobe --force agrmodem
# modprobe --force agrserial
is necessary to load the drivers, and does not appear to cause ill effects.


All of the above packages are dkms competent.  This means that if your
Linux distros dkms package
is previously installed, if provides for future updates matching
forthcoming kernels.

-------------- end Agere Systems section -------------------

From

http://linmodems.technion.ac.il/packages/ltmodem/11c11040/

download

agrsm048pci-2.1.60_20100108.tar.gz
file and follow instructions provided in the readme or as provided in
Modem/DOCs/Agrsm.txt.

Regards,


Antonio

On Tue, Dec 13, 2011 at 11:47 AM, Hesham M.Hafez <[email protected]> wrote:
>