Re: please help

Hashem,

Forgot to add you may need to add kernel-devel package and Development
Tools to compile the driver as I did not see the lines:

----------------------------
 The kernel was compiled with gcc version 4.4.4 and a compiler is not insta=
lled

 linux-headers-2.6.32-71.el6.i686 resources needed for compiling are
not manifestly ready!

 If compiling is necessary packages must be installed, providing:
	gcc-4.4  kernel-source-2.6.32-71.el6.i686
---------------------------

on first inspection :(

Regards,

Antonio

On Tue, Dec 13, 2011 at 1:35 PM, Antonio Olivares
<[email protected]> wrote:
> Hesham,
>
> scanModem reports that you have an agrsm modem supported through agrsm
> modem driver:
>
> Predictive =A0diagnostics for card in bus 05:00.0:
> =A0 =A0 =A0 =A0Modem chipset =A0detected on
> NAME=3D"Communication controller: Agere Systems V.92 56K WinModem "
> CLASS=3D0780
> PCIDEV=3D11c1:048c
> SUBSYS=3D11c1:044c
> IRQ=3D3
> HDA2=3D00:1b.0
> HDA2=3D01:00.1
> IDENT=3Dagrsm
>
> =A0For candidate modem in: =A005:00.0
> =A0 0780 Communication controller: Agere Systems V.92 56K WinModem
> =A0 =A0 =A0Primary device ID: =A011c1:048c
> =A0Support type needed or chipset: =A0 =A0 =A0 =A0agrsm
>
>
>
> The AgereSystems/LSI agrsm code supports compiling of a agrmodem +
> agrserial driver pair.
> There are a few different chipsets which use this driver pair, but
> they use different code resources:
> Chipsets =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0KV* =A0 =A0 Packa=
geNames (most current as of November 2009)
> -------------------------------------------------------------------------=
---------------------
> 11c1:048c and 11c1:048f
> 2.6.29 =A0agrsm048pci-2.1.60_20100108_i386.deb or
> agrsm048pci-2.1.60_20100108.tar.gz
> 11c1:0620 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 2.6.31
> agrsm06pci-2.1.80_20100106_i386.deb or
> agrsm06pci-2.1.80~20100106.tar.gz !!
> 11c11040 (on HDA audio cards) =A0 2.6.31
> agrsm-11c11040_20091225_i386.deb or
> agrsm-11c11040-2.1.80~20091225.tar.bz2 =A0!!
> =A0 All available at:
> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
> Additionally there are;
> automation & testing =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0agrsm-tools_0=
.0.1_all.deb or
> agrsm-tools-0.0.1-2.noarch.rpm
> General background =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0agrsm_howto=
.txt
> -------------------------------------------------------------------------=
-----------------------
> * KV =3D=3D latest kernel release with a reported success
> !! Latest update with major credit to =A0Nikolay Zhuravlev
> =A0 But see conflict issue:
> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html
> =A0 For the 11c11040 chip with kernels 2.6.31 and later a change in a
> modules loading settingmay be necessary.
> =A0 Within the file /etc/modprobe.d/alsa-base.conf =A0(or equivalent for
> your Distro), change the phrase:
> =A0 =A0 =A0options snd-hda-intel power_save=3D10
> =A0 to:
> =A0 =A0 =A0options snd-hda-intel power_save=3D0
> =A0 or the agrsm drivers will not function. For Ubuntu related systems
> this can be done with:
> =A0 $ sudo gedit /etc/modprobe.d/alsa-base.conf
>
> Report from =A0Bjorn Wielens:
> Please note- trying to load the modules on a OpenSuSE 11.2 system gives
> =A0an error about the module_version symbol. Using:
> # modprobe --force agrmodem
> # modprobe --force agrserial
> is necessary to load the drivers, and does not appear to cause ill effect=
s.
>
>
> All of the above packages are dkms competent. =A0This means that if your
> Linux distros dkms package
> is previously installed, if provides for future updates matching
> forthcoming kernels.
>
> -------------- end Agere Systems section -------------------
>
> From
>
> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
>
> download
>
> agrsm048pci-2.1.60_20100108.tar.gz
> file and follow instructions provided in the readme or as provided in
> Modem/DOCs/Agrsm.txt.
>
> Regards,
>
>
> Antonio
>
> On Tue, Dec 13, 2011 at 11:47 AM, Hesham M.Hafez <[email protected]> w=
rote:
>>