Re: please help

Hesham,

On Wed, Dec 14, 2011 at 11:54 AM, Hesham M.Hafez <[email protected]> wro=
te:
> On 12/14/2011 05:31 PM, Antonio Olivares wrote:
>>
>> [Dialer Defaults]
>> =A0Modem =3D /dev/modem
>> =A0Baud =3D 57600
>> =A0Init1 =3D ATZ
>> =A0Init2 =3D ATQ0 V1 E1 S0=3D0&C1&D2
>> =A0Init3 =3D
>> =A0Area Code =3D
>> =A0Phone =3D PHONE_NO_GOES_HERE
>> =A0Username =3DYOUR_USERNAME_GOES_HERE
>> =A0Password =3D**********
>> =A0Ask Password =3D 0
>> =A0Dial Command =3D ATDT
>> =A0Stupid Mode =3D 1
>> =A0Compuserve =3D 0
>> =A0Force Address =3D
>> =A0Idle Seconds =3D 300
>> =A0DialMessage1 =3D
>> =A0DialMessage2 =3D
>> =A0ISDN =3D 0
>> =A0Auto DNS =3D 1
>
> I used the following parameters in /etc/wvdial.conf
>
>
> [Dialer Defaults]
> =A0Modem =3D /dev/modem
> =A0Baud =3D 57600
> =A0Init1 =3D ATZ
> =A0Init2 =3D ATQ0 V1 E1 S0=3D0 &C1 &D2
> =A0Init3 =3D
> =A0Area Code =3D
> =A0Phone =3D 0777 7777

Here the phone number should be all together and not separated :  07777777
>

> =A0Dial Command =3D ATDT
> =A0Stupid Mode =3D 1
> =A0Compuserve =3D 0
> =A0Force Address =3D
> =A0Idle Seconds =3D 300
> =A0DialMessage1 =3D
> =A0DialMessage2 =3D
> =A0ISDN =3D 0
> =A0Auto DNS =3D 1
>
> But unfortunately doesn't work too. My phone line is down now I just want
> test the modem and make sure that it's installed correctly since I'll use=
 it
> in fax server not for Internet purposes

I don't know how to advice here for faxing.

Regards,

Antonio