LRP 2.9.8 setup for 486DX2/66 with 64MB RAM.

Hi
  I am trying to fire up LRP 2.9.8 for PPPoE ADSL line with dynamic IP =
address asigned during PPPoE procedure.
  I've done idiot_image_Linux_2.0 1680kb floppy, copied 3c509.o(I've got =
two 3c509 NICs), bsd_comp.o, ppp.o, slhc.o to it. Now I'm trying to boot =
my common comp(P41.7GHz 512MBDDR running debian) with the floppy to copy =
modules to ramdisk image, but I'm in stuck. Things are going bad in two =
ways:

1. Everything stops at boot showing line like this:
	SYSLINUX ver.1.49  .date_here. boot failed!

2. If I 'syslinux /dev/fd0u1680' the floppy it's look like very slow =
uncompressing ramdisk image then uncompressing kernel and... my machine =
reboots!

  I didn't try to boot my 486 with the floppy 'cause router isn't ready =
yet. I'm going to try it this evening maybe.
  What I've done wrong? Is there anything I have missed or should look =
at.
Thanks for Your help, Hubert.

_______________________________________________
linux-router maillist  -  [email protected]
http://www.linuxrouter.org/mailman/listinfo/linux-router