Re: DLINK DWL-122 on ARM platform not stable, why?
Solomon Peachy <[email protected]> Thu, 21 Sep 2006 10:32:09 -0400
| Newsgroups | gmane.linux.linux-wlan.user |
|---|---|
| Message-ID | <[email protected]> |
--===============0476138188== Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="5/uDoXvLw7AC5HRs" Content-Disposition: inline --5/uDoXvLw7AC5HRs Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Thu, Sep 21, 2006 at 04:59:42PM +0800, Tiger.Yin wrote: > The dlink dwl-122 dongle i used on my ARM(XScale270) platform seemed > not stable, the linux is 2.6.10. USB driver used OHCI mode. What driver version? What firmware version? > Sometime, this error appeared: > skb_p80211_to_ether: OTHER frame too large (-4 > 1500) This is interesting. =20 > 2. Opensystem with WEP(64bits) > When i set WEP(64bits) on AP, the dongle also could connect to the AP, > and i could see the dongle's information on AP's trace. But even i set > IP address and route of the dongle, no host could i ping to. Some > error info like this: > ... ... > message=3Dlnxreq_autojoin > ssid=3D'mobot' > authtype=3Dopensystem > resultcode=3Dsuccess > /usr/lib # linkstatus=3DCONNECTED Are you sure you don't need 'authtype=3Dsharedkey'? Is the WEP key known to be identical/correct? Finally, despite many heroic efforts from many contributors (Especially Chris Rankin), prism2 USB hardware is inherently=20 flaky. Newer firmawre helps a lot, as do newer driver revs. =20 - Solomon --=20 Solomon Peachy [email protected] AbsoluteValue Systems http://www.linux-wlan.com 721-D North Drive +1 (321) 259-0737 (office) Melbourne, FL 32934 +1 (321) 259-0286 (fax) --5/uDoXvLw7AC5HRs Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFFEqJohinxHf95MjYRAm25AKCrJendvp8a24/phRclPlSeoCEG/gCcD+oz Ll9ZOq3HKgoS+Yzohdr8q+U= =hpwo -----END PGP SIGNATURE----- --5/uDoXvLw7AC5HRs-- --===============0476138188== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Linux-wlan-user mailing list [email protected] http://lists.linux-wlan.com/mailman/listinfo/linux-wlan-user --===============0476138188==--