Re: 4GB of memory and NForce4SLI

Giuseppe Ghib=F2 ha scritto:

> - with kernel 2.6.14-2mdksmp + hardware hole enabled in BIOS =3D> boot =
but=20
> soon after a while (i.e. at end of inits) crashes with error:
>=20
>   kernel panic - not syncing: PCI-DMA: high address but no IOMMU
>=20
>  note that in this case I've also tried to boot using iommu=3Dforce and=
=20
> iommu=3Doff, but same error.

using for this case 'iommu=3Dsoft swiotlb=3D65536' works instead, but
AFAIK soft it's an option for Intel CPUs.