Re: [Security Firewall] trying to understand bonding

working on the multipath route entry and I get an error after  
entering the following line

ip route add default scope global nexthop via 69.25.220.193 dev eth2  
weight 1 nexthop via 69.25.220.197 dev eth1 weight 1

rtnetlink file exists

lartc.org docs say this means handle is already in use.   
Unfortunately I'm not sure what that means to me.

Tim Taplin
ps.  thanks for the patience
On Jun 15, 2005, at 1:05 AM, florin wrote:

> everything you want to do can be done ... by hand, but it is NOT
> actually implemented in MNF and its web interface.
>
> On 6/15/05, taplin-NnGsx2/[email protected] <taplin-NnGsx2/[email protected]>  
> wrote:
>
>> Would it be possible to create a vpn tunnel across the two ethernet
>> links that connected to the same host and then bond those two vpn
>> tunnels together?
>>
>>
>> Tim Taplin
>>
>> On Jun 14, 2005, at 3:13 AM, florin wrote:
>>
>>
>>> Hi there,
>>>
>>> The MNF bonding section refers to ethernet channel bonding and  
>>> NOT to
>>> DSL/modem/ISDN bonding.
>>>
>>> For more reading about this:
>>>
>>> /usr/src/linux/Documentation/networking/bonding.txt
>>> http://linux-ip.net/html/ether-bonding.html
>>> http://www.kernel.org/pub/linux/kernel/people/marcelo/linux-2.4/
>>> Documentation/networking/bonding.txt
>>> http://www.linux-corner.info/bonding.html
>>>
>>> I wanted to also add Julian Anastasov's patches to the kernel but
>>> didn't have time for this ...
>>>
>>> here you have the details :
>>> http://en.tldp.org/HOWTO/Adv-Routing-HOWTO/lartc.rpdb.multiple-
>>> links.html
>>>
>>>
>>> On 6/14/05, taplin-NnGsx2/[email protected] <taplin-NnGsx2/[email protected]>
>>> wrote:
>>>
>>>
>>>> So I'm trying to get an understanding of how Bonding ethernet
>>>> interfaces works.
>>>>
>>>> What I'm trying to do is use two separate sdsl links to provide a
>>>> faster connection.
>>>>
>>>> I have two SDSL 1.5 links on two separate subnets.
>>>>
>>>> WAN Link One 69.25.220.192/30 on ethernet3 local ip 69.25.220.194
>>>>
>>>> WAN link two 69.25.220.196/30 on ethernet2 local ip 69.25.220.198
>>>>
>>>> I'd like to loadshare across these two circuits.  This is at a
>>>> clients site and I'm the ISP so I could possibly juggle things  
>>>> around
>>>> but this is the config I'd like to use.
>>>>
>>>> Is this possible? Am I completely missing the point?
>>>>
>>>> When I look at setting up a bond0 interface it wants me to  
>>>> choose the
>>>> slave interfaces and then provide an IP for the bond0 interface.  I
>>>> cant figure out where that IP would come from.  The LAN subnet?? a
>>>> WAN subnet that is routed thru both of the SDSL links??  Just
>>>> confused about this.
>>>>
>>>> Tim Taplin
>>>>
>>>>
>>>>
>>>>
>>>> ____________________________________________________
>>>> Want to buy your Pack or Services from MandrakeSoft?
>>>> Go to http://www.mandrakestore.com
>>>> Join the Club : http://www.mandrakeclub.com
>>>> ____________________________________________________
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>> my 2cts,
>>> --
>>> Florin
>>>
>>> ____________________________________________________
>>> Want to buy your Pack or Services from MandrakeSoft?
>>> Go to http://www.mandrakestore.com
>>> Join the Club : http://www.mandrakeclub.com
>>> ____________________________________________________
>>>
>>>
>>
>>
>>
>>
>> ____________________________________________________
>> Want to buy your Pack or Services from MandrakeSoft?
>> Go to http://www.mandrakestore.com
>> Join the Club : http://www.mandrakeclub.com
>> ____________________________________________________
>>
>>
>>
>>
>
>
> -- 
> Florin
>
> ____________________________________________________
> Want to buy your Pack or Services from MandrakeSoft?
> Go to http://www.mandrakestore.com
> Join the Club : http://www.mandrakeclub.com
> ____________________________________________________
>

____________________________________________________
Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
____________________________________________________