Re: Kernel Panic : VFS :Unable to mount root fs

Hi,

Thanks for reply. Below are the details:

Mindi-BusyBox v1.21.1-r3332
Mindi 3.0.2-r3578
Mondo-3.2.2-1.rhel5.x86_64
perl-ProjectBuilder 0.14.6-1

Regards,
Osama









Osama Tariq | NetOps Engineer
NetworkConfig
M 92.345.6999001

On Mon, Sep 18, 2017 at 7:07 PM, Gattegno, Victor <[email protected]>
wrote:

> Hello,
>
> On the machine that executed mondoarchive, check Busybox version: is only
> one version installed ?, which version is installed ?, is it the Busybox
> from ftp://ftp.mondorescue.org ?
>
> And check also Busybox compatibility through the table of this URL:
> http://trac.mondorescue.org/wiki/FAQ#Q38Whichversionsofmindiandmond
> oarecompatible
>
> Cordially,
> Victor
>
> -----Original Message-----
> From: Usama Tariq [mailto:[email protected]]
> Sent: samedi 16 septembre 2017 09:11
> To: [email protected]
> Subject: [Mondo-devel] Kernel Panic : VFS :Unable to mount root fs
>
> I received below message while restore mondorescue backup, When I boot from
> ISO:
>
> > No filesystem could mount root, tried ext2 iso 9660 Kernel panic - not
> > syncing VFS unable to mount root fs on unknown
> > block(hd1,0)
>
> Below is my syslinux/syslinux.cfg file content:
>
> prompt 1
> display message.txt
> F1 message.txt
> F2 boot1.txt
> F3 boot2.txt
> F4 pxe.txt
> default interactive
> timeout 300
>
> label interactive
>     kernel /vmlinuz
>     append initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=182964
> interactive apm=0ff devfs=nomount noresume selinux=0 barrier=off
> udevtimeout=10
> label expert
>     kernel /vmlinuz
>     append initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=182964 expert
> apm=0ff devfs=nomount noresume selinux=0 barrier=off
> udevtimeout=10
> label compare
>     kernel /vmlinuz
>     append initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=182964
> compare apm=0ff devfs=nomount noresume selinux=0 barrier=off
> udevtimeout=10
> label iso
>     kernel /vmlinuz
>     append initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=182964 iso
> apm=0ff devfs=nomount noresume selinux=0 barrier=off
> udevtimeout=10
> label nuke
>     kernel /vmlinuz
>     append initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=182964 nuke
> apm=0ff devfs=nomount noresume selinux=0 barrier=off
> udevtimeout=10
> label isonuke
>     kernel /vmlinuz
>     append initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=182964
> isonuke apm=0ff devfs=nomount noresume selinux=0 barrier=off
> udevtimeout=10
>
> -------------------------------
> Kindly guide me how to get rid off this issue ?
>
>
>
>
> --
> Sent from: http://mondorescue-mailing-list.679749.n3.nabble.com/
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most engaging
> tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Mondo-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/mondo-devel
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Mondo-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/mondo-devel
>

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot

_______________________________________________
Mondo-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/mondo-devel